Products

• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.452″ OD, 0.031″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.374″ OD, 0.045″ Thick
• Abrasive Belt: 1/4" Wide, 24" OAL, 80 Grit, Zirconia Alumina
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.455″ ID, 0.751″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.627″ OD, 0.029″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.191″ ID, 0.312″ OD, 0.021″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.199″ ID, 3/4″ OD, 0.057″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.187″ ID, 5/8″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.171″ ID, 0.329″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.203″ ID, 0.377″ OD, 0.031″ Thick
• Label Maker Label: White, Polyester, 1/2" OAW, 10,000 per Roll
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.171″ ID, 0.296″ OD, 0.054″ Thick
• Label Maker Label: White, Polyester, 10,000 per Roll
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.211″ ID, 0.394″ OD, 0.033″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.227″ ID, 0.374″ OD, 0.039″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.32″ OD, 0.013″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.351″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.198″ ID, 0.999″ OD, 0.061″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.38″ OD, 0.035″ Thick
• Extra Length Drill Bit: 0.1417", 135 &deg, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.192″ ID, 0.44″ OD, 0.026″ Thick
• Cutting Pliers; Insulated: No
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.176″ ID, 0.41″ OD, 0.045″ Thick
• Cutting Pliers; Insulated: No
• Micro Drill Bit: 1.15 mm Dia, (0.0453"), 180 deg, Solid Carbide
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.227″ ID, 0.312″ OD, 0.021″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 1.001″ OD, 0.063″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.309″ OD, 0.013″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.4930; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.162″ ID, 0.531″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.341″ OD, 0.03″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 1/2″ OD, 0.037″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.186″ ID, 0.63″ OD, 0.054″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.182″ ID, 0.356″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.742″ OD, 0.042″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.373″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.406″ OD, 0.07″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.193″ ID, 0.357″ OD, 0.055″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.196″ ID, 0.312″ OD, 0.053″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.197″ ID, 0.35″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.194″ ID, 0.439″ OD, 0.041″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.166″ ID, 0.709″ OD, 0.043″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.372″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.551″ OD, 0.055″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.379″ OD, 0.058″ Thick
• Label Maker Label: White, Polyolefin, 1-1/2" OAW, 1,000 per Roll
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 0.562″ OD, 0.035″ Thick
• Label Maker Label: White, Polyolefin, 1-1/2" OAW, 2,500 per Roll
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.302″ OD, 0.016″ Thick
• Lockout Tag: 5-3/4" High, 3" Wide, Polyester, "DANGER"
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.309″ OD, 0.012″ Thick
• Striking Box End Wrench: 4-5/8", 12 Point, Single End
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.406″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.356″ OD, 0.056″ Thick
• Combination Wrench Set: 4 Pc, Metric
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.312″ OD, 0.026″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.437″ OD, 0.042″ Thick
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.106″ ID, 0.309″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.168″ ID, 0.624″ OD, 0.021″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.31″ OD, 0.007″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.35″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.155″ ID, 0.393″ OD, 0.056″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.177″ ID, 0.281″ OD, 0.015″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.302″ OD, 0.016″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.279″ OD, 0.027″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 3/8″ OD, 0.035″ Thick
• Air Grippers Accessories: Fail Safe Valve (Imperial)
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 0.432″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 7/8″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.322″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.347″ OD, 0.026″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.32″ OD, 0.027″ Thick
• 1″ Screw Standard Flat Washer: Steel, Uncoated 0.086″ ID, 0.74″ OD, 0.012″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.363″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 3/4″ OD, 0.057″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.532″ OD, 0.027″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.4″ OD, 0.012″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.314″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.269″ OD, 0.012″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.155″ ID, 0.438″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.434″ OD, 0.056″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.253″ OD, 0.016″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.498″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.156″ ID, 0.438″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.372″ OD, 0.016″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.467″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.277″ OD, 0.038″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.3″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.255″ OD, 0.059″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.171″ ID, 0.276″ OD, 0.04″ Thick
• Corner Radius End Mill: 1/8" Dia, 3/4" LOC, 0.0100" Radius, 5 Flute, Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.263″ OD, 0.021″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.346″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.311″ OD, 0.035″ Thick
• Corner Radius End Mill: 3/4" Dia, 3-3/4" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 1/2″ OD, 0.035″ Thick
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.09″ ID, 0.247″ OD, 0.027″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 0.343″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.387″ OD, 0.044″ Thick
• Replacement/Interchange Hydraulic Filter Element: Microglass, 10 µ
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.281″ OD, 0.021″ Thick
• Replacement/Interchange Hydraulic Filter Element: Wire Mesh, 60 µ
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.314″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.341″ OD, 0.035″ Thick
• Micro Drill Bit: 1.70 mm Dia, (0.0669"), 139 deg, Solid Carbide
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.154″ ID, 0.562″ OD, 0.035″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.461″ OD, 0.041″ Thick
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: CTBU; Compatible Blade Height (Fractional Inch): 1; Compatible Blade Width (mm): 6.00; Shank Height (mm): 25.00
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.624″ OD, 0.054″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 3/8″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.37″ OD, 0.013″ Thick
• Label Maker Label: White, Polyolefin, 1-1/2" OAW, 2,500 per Roll
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.178″ ID, 0.532″ OD, 0.052″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.437″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.269″ OD, 0.054″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.272″ OD, 0.016″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 3/4″ OD, 0.054″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.141″ ID, 0.43″ OD, 0.042″ Thick
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.1267; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.167″ ID, 0.368″ OD, 0.013″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.358″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.503″ OD, 0.045″ Thick
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.103″ ID, 0.267″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.499″ OD, 0.054″ Thick
• Corner Radius End Mill: 25 mm Dia, 45.00 mm LOC, 4.00 mm Radius, 6 Flute, Solid Carbide
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.102″ ID, 0.255″ OD, 0.026″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.281″ OD, 0.021″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.27″ OD, 0.027″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.328″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.437″ OD, 0.026″ Thick
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.106″ ID, 0.316″ OD, 0.042″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.305″ OD, 0.016″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 5/8″ OD, 0.041″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.312″ OD, 0.021″ Thick
• Vibration Isolators; Isolator Type: Stud/Stud; Insert Material: Stainless Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 258.00 N; Top Diameter: 19.00; Bottom Diameter: 19; Thread Size: 1/4-20; Overall Width: 19 mm
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 3/8″ OD, 0.027″ Thick
• Micro Drill Bit: 1.05 mm Dia, (0.0413"), 180 deg, Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.321″ OD, 0.021″ Thick
• Cutting Pliers; Insulated: No
• Extra Length Drill Bit: 0.4219", 135 &deg, Solid Carbide
• Corner Radius End Mill: 1" Dia, 1" LOC, 0.0300" Radius, 6 Flute, Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.54″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.124″ ID, 1″ OD, 0.026″ Thick
• Hydraulic Chuck Sleeves; Inside Diameter (Inch): 1/4; Outside Diameter (Inch): 3/4
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.563″ OD, 0.045″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 3/8″ OD, 0.012″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.997″ OD, 0.056″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.155″ ID, 0.34″ OD, 0.027″ Thick
• Extra Length Drill Bit: 0.1875", 140 &deg, Carbide
• Pick Racks; Rack Type: Wall Mountable; Rack Style: Louvered Panel; Bin Type: Hook-On; Assembled: Yes; Load Capacity (Lb.): 1000.000; Gauge: 16
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.372″ OD, 0.027″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.465″ OD, 0.035″ Thick
• Standard Flat Washer: Steel, Uncoated 0.076″ ID, 1/4″ OD, 0.027″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.483″ OD, 0.021″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.16″ ID, 0.561″ OD, 0.043″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.166″ ID, 1/2″ OD, 0.043″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.381″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.163″ ID, 0.369″ OD, 0.021″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.298″ OD, 0.03″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 1/4″ OD, 0.027″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.255″ OD, 0.054″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.38″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 3/8″ OD, 0.035″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.317″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.282″ OD, 0.035″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.256″ OD, 0.044″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.386″ OD, 0.035″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.178″ ID, 0.502″ OD, 0.035″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 0.31″ OD, 0.024″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.344″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.175″ ID, 0.63″ OD, 0.054″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.342″ OD, 0.021″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.165″ ID, 0.276″ OD, 0.044″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.308″ OD, 0.021″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.421″ OD, 0.035″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.313″ OD, 0.026″ Thick
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.311″ OD, 0.016″ Thick
• Corner Radius End Mill: 1/2" Dia, 1-1/4" LOC, 0.0300" Radius, 6 Flute, Solid Carbide
• Label Maker Label: Clear & White, Polyester, 3,000 per Roll
• Lumber; Thickness: 1; Type: Common Board; Width: 4; Length Ft.: 10; Wood Type: Spruce; Grade: #2; Treated: KDHT
• Label Maker Label: Clear & White, Vinyl, 2-5/8" OAW, 3,000 per Roll
• Do Not Operate Tag: 5-3/4" High, 3" Wide, Paper, "DANGER"
• Upright Vacuum Cleaners; Power Source: Electric; Filtration Type: Standard; Bag Included: Yes; Collection Capacity: 4.5 qt; Vacuum Collection Type: Disposable Bag; Number of Motors: 2; Maximum Air Flow: 95
• Masking Paper: 24 mm Wide, 55 m Long, 5.8 mil Thick, Blue
• Top Plate Casters; Mount Type: Plate; Number of Wheels: 1.000; Wheel Diameter (Inch): 4; Wheel Material: Synthetic; Wheel Width (Inch): 1-7/16; Wheel Color: Gray
• Long Nose Pliers; Pliers Type: Round Nose Pliers; Jaw Texture: Serrated; Jaw Length (Inch): 1-11/32; Jaw Width (Inch): 17/32
• Replacement/Interchange Hydraulic Filter Element: Microglass, 25 µ
• Woodruff Keyseat Cutter: 3/8" Cut Dia, 3/64" Cut Width, 3/8" Shank Dia, Straight Tooth
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Extra Length Drill Bit: 0.4606", 140 &deg, Carbide
• Hat: Size L, Yellow, Adjustable Drawstring & Reflective Tape Solid, Polyester
• Pipe Fitting: 1 x 1″ Fitting, 316 Stainless Steel 150 psi
• Strip: Neoprene Rubber, 1/4″ Wide, 120″ Long, Black Durometer 40, Plain Backing
• Hex Socket Cap Screw: 5/16-24 Thread, 4" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• Do Not Operate Tag: 5-3/4" High, 3" Wide, Polyester, "DANGER"
• Lumber; Thickness: 8; Width: 8; Length Ft.: 10; Wood Type: Douglas Fir; Grade: #1; Treated: KDHT
• Label Maker Label: Clear, Polyester, 10,000 per Roll
• Disc Sander Shield (upper); 12" diameter, adjustable, mounting hardware included
• Manual Hold-Down Toggle Clamp: Vertical, 500 lb Capacity, U-Bar, Flanged Base 60 ° Handle Movement, 100 ° Bar Opening, Steel
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.0300" Radius, 7 Flute, Solid Carbide
• Plastic Sheet: Acetal, 1/16″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Ergonomic Multifunction Task Chair: Vinyl, 37" Seat Height, Dove Gray
• MIG Welding Wire: 0.03″ Dia 2 lb
• Corner Radius End Mill: 1/8" Dia, 3/4" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
• Ball Grip Quick-Release Pin: Ring Handle, 5/8″ Pin Dia, 2-1/2″ Usable Length 4.34″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Hard Hat: Class E & G, 4-Point Suspension Yellow, Polyethylene, Slotted
• Masking Paper: 36 mm Wide, 54.8 m Long, 4.8 mil Thick, Natural & Tan
• Corner Radius End Mill: 5/8" Dia, 1-5/8" LOC, 0.0300" Radius, 7 Flute, Solid Carbide
• Hard Hat: Class E & G, 4-Point Suspension White, Polyethylene, Slotted
• Cut, Puncture & Abrasion-Resistant Gloves: UltraTech UT2953, Size 2X-Large, ANSI Cut A4, ANSI Puncture 4, Foam Nitrile, HPPE
• Plastic Bar: Acetal, 1/4″ Thick, Black Rockwell M-90
• Die Drill Bit: 0.1495″ Dia, 140 °, Solid Carbide Uncoated, 7/8″ Flute, 2″ OAL, Series 195
• Corner Radius End Mill: 1/8" Dia, 3/4" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
• Micro Drill Bit: 2.30 mm Dia, (0.0906"), 139 deg, Solid Carbide
• 3/4 x 12″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• Label Maker Label: Blue, Polyolefin, 500 per Roll
• Hex Socket Cap Screw: 3/8-16 Thread, 6-1/2" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• Pressure Washer: 40.00 Amp, 3000.00 psi, Hot Water, Electric Power
• Hex Socket Cap Screw: 1/4-28 Thread, 2-1/2" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• Hex Socket Cap Screw: 5/8-11 Thread, 2-3/4" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• Label Maker Label: Light Gray, Metallized Polyester, 1-1/2" OAW, 10,000 per Roll
• Ergonomic Multifunction Task Chair: Vinyl, 37" Seat Height, Black
• 45° Lead Angle, 3 Inch Cut Diam Indexable Chamfer & Angle End Mill Promotional Kit
• Label Maker Label: Light Gray, Metallized Polyester, 10,000 per Roll
• Air Tool & Air Compressor Oil; Container Size (Gal.): 275.00; Container Type: Tote; Food Grade: No; Flash Point (Deg F): 510.00
• Tire Chains; For Use With: All ZT800 & 100 Series
• Turning Insert: TPGB221S00435MET, Cubic Boron Nitride (CBN)
• Turning Insert: TNGA332S00730MET, Cubic Boron Nitride (CBN)
• Air Compressor .25" Y-Strainer: Use with dDV720-66 & DDV720-22
• Air Conditioners; Air Conditioner Type: Window (Cooling Only); Cooling Area: 550
• Replacement/Interchange Spin-On Hydraulic Filter Element: Microglass, 15 µ
• Crowfoot Wrenches; Drive Size: 1/4; Wrench Size (mm): 23.00; Material: Steel
• Square End Mill: 5/8" Dia, 1-1/4" LOC, 6 Flute, Solid Carbide
• Sheet: Buna-N Rubber, 12" Wide, 24" Long, Black
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1902; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Micro Drill Bit: 2.40 mm Dia, (0.0945"), 139 deg, Solid Carbide
• Boring Inserts; Insert Style: TBMT; Insert Size Code: 1211; Insert Material: Cermet; Material Grade: K20, K10, K01, P10, P20; Manufacturer Grade: CCX; Inscribed Circle (Inch): 5/32
• Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.0600" Radius, 7 Flute, Solid Carbide
• Long Nose Pliers; Pliers Type: Long Nose Pliers, Cutting, Insulated; Jaw Texture: Serrated; Jaw Length (Inch): 2-7/8; Jaw Width (Inch): 45/64
• Hex Socket Cap Screw: #12-24 Thread, 1/2" Length Under Head, Stainless Steel, Bright/Uncoated Finish
• Do Not Operate Tag: 5-3/4" High, 3" Wide, Polyester, "DANGER"
• Double Head Open End Wrench Set: 6 Pc, Metric
• Open End Wrenches; Wrench Size: 9 x 10 mm; Material: Steel; Finish: Satin, Chrome
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3980; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Vibration Isolators; Isolator Type: Stud/Stud; Insert Material: Stainless Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 195.70 N; Top Diameter: 16.00; Bottom Diameter: 16; Thread Size: #8-32; Overall Width: 16 mm
• Corner Radius End Mill: 1/4" Dia, 3/4" LOC, 0.50 mm Radius, 3 Flute, Solid Carbide
• Hex Nut: 1-1/4-12, Grade L9 Steel, Yellow Zinc Dichromate, Cadmium & Waxed Finish
• Hex Socket Cap Screw: 3/8-16 Thread, 1-1/2" Length Under Head, Alloy Steel, Thermal Black Oxide Finish
• Hex Socket Cap Screw: 5/16-18 Thread, 1-1/4" Length Under Head, Stainless Steel, Bright/Uncoated Finish