Products

• Interactive Full-Length Safety & Regulatory Compliance Courses for 251-500 Employees, Multimedia Training Kit Online, English & Spanish, Enter Number of Employees Being Trained in Qty Box Below
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Minimum Torque (Ft/Lb): 150.00; Maximum Torque (Ft/Lb): 750.00; Overall Length (Decimal Inch): 53.7000; Head Type: Interchageable; Head
• Spot Welder Tips; Tip Type: Straight Tip B Nose (Dome); Material: RWMA Class 1 - C15000; Type: Straight Tip B Nose (Dome)
• Linear Motion Systems; Type: Guide Rail; Overall Width (mm): 20.2000; Overall Length (mm): 200.0000; Bolt Hole Spacing: 50.0000; Bolt Size: #8; Height (mm): 9.5000
• Linear Motion Systems; Type: Mounting Plate; Overall Width (mm): 65.0000; Overall Length (mm): 100.0000; Bolt Hole Spacing: 28.0000; Distance Between Mounting Holes: 1-37/64; Center to Center: 28.0000; Height (mm): 3.0000
• Vertical Bandsaw: Step Pulley Drive, 12″ Height Capacity 1 Phase, 115 & 230V, 1.5 hp, 19″ Table Length, 19″ Table Width
• Size XL Hi-Viz Yellow High Visibility Short Sleeve T-Shirt 48″ Chest, 0 Pockets, Polyester
• Shop Press: 1″ Stroke 18-5/8″ Between Uprights, 40″ Ram to Table
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 15.00; Maximum Torque (Ft/Lb): 150.00; Overall Length (Decimal Inch): 23.4000; Head Type: Reversibl
• Black Cap: 1/4″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Plastic Sheet: Polyvinylchloride, 1/4″ Thick, Gray Rockwell R-110
• Electric Hoist: Pendant Controller, 1 Chain
• Stationary Workstations; Number of Drawers: 0.000; Top Type: Melamine Top; Painted Steel; Width (Inch): 590.6; Length: 287.4020; Depth (Inch): 287.4; Depth (Inch): 287.4; Load Capacity (Lb.): 250.000; Load Capacity (Lb.): 250.000; Height (Inch): 905.5; Ty
• Deep Groove Ball Bearing: 62 mm OD Bearing Number 6908
• Hole Saw: 1-1/4" Saw Dia, 2" Cut Depth
• LOGIQFGRIP TAG N3HF IC1010 Carbide Cutoff Insert TiAlN/TiN Finish, 7° Neutral Lead Angle, 1/8″ Cutting Width, 1/64″ Corner Radius, Series Tang-Grip
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 7.40; Maximum Torque (Ft/Lb): 75.00; Overall Length (Decimal Inch): 19.7000; Head Type: Reversible
• Torque Wrenches; Wrench Type: Torque; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 150.00; Maximum Torque (Ft/Lb): 725.00; Overall Length (Decimal Inch): 59.2000; Head Type: Reversible Ratcheting; Fixed; Head
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.75 in; Material: Bi-Metal; Application: Metal (Non-Ferrous), Wood & Nails, Wood, PVC, Drywall; Includes:
• Belt Sanding Machine: 60″ Long, 8″ Wide, Vertical 7.5 hp, 3 Phase, 220 & 440V, 3,500 ft/min Belt Speed
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 2.5 in; Material: Bi-Metal; Application: Wood & Nails, Copper Pipe, Wood, PVC, Drywall; Includes: (1) Impe
• Horizontal Bandsaw: 7 x 12″ Rectangular, 7″ Round Capacity, Step Pulley Drive 115 & 230V, 1 Phase
• Rotary & Multi-Tool Accessories; Accessory Type: Scraper; For Use With: Compatible with all Starlock ™ multi-tools; Attachment Size: 2 in; Material: Stainless Steel; Application: Sealant, Caulk, Adhesives, Paint, Foam Insulation; Includes: (1) Imperial Bl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 2; Color: Red; Material: Vinyl; Size: 8-1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 2″; Color: Blue; Material: Vinyl; Size: 8-1/2x11; Minimum Order Quantity: Vinyl; Material: Vinyl
• CNC Storage Accessories; For Use With: Tool Management Logistics System; Description: Magazine cabinet RAL9010/RAL9005
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 15.00; Maximum Torque (Ft/Lb): 150.00; Overall Length (Decimal Inch): 21.5000; Head Type: Int
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 3.00; Maximum Torque (Ft/Lb): 30.00; Overall Length (Decimal Inch): 11.6000; Head Type: Reversible
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 4.50; Maximum Torque (Ft/Lb): 45.00; Overall Length (Decimal Inch): 16.8000; Head Type: Reversible
• Ironworkers; Throat Depth: 3.75 in; Punching Pressure: 50; Punching Capacity: 3/8 in; Hydraulic Pressure: 3000; Pipe Notching Capacity: 1/4 x 1-3/4 x 2; Pipe Notching Capacity In Schedule 40 Id: 2 in; Shearing Capacity At 45 Degrees: 4 x 4 x 1/4; Shearing
• Taper Length Drill Bit: 0.0890″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.1065″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.1130″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 7.40; Maximum Torque (Ft/Lb): 75.00; Overall Length (Decimal Inch): 18.3000; Head Type: Inter
• Taper Length Drill Bit: 0.0700″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Downdraft Tables; Suction (CFM): 1950; Table Length (Inch): 24; Table Width (Inch): 80; Voltage: 220.00; Horsepower (HP): 1; Filter Rating: 250 Microns; Load Capacity (Lbs): 660.000; Includes: (2) 1 Motors; Fire Resistant Filter; Additional Information: F
• Taper Length Drill Bit: 0.0810″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Taper Length Drill Bit: 0.0760″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Taper Length Drill Bit: 0.0860″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Taper Length Drill Bit: 0.1100″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Taper Length Drill Bit: 0.1200″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Extra Length Drill Bit: 0.0945″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Taper Length Drill Bit: 0.0413″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Taper Length Drill Bit: 0.0472″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Taper Length Drill Bit: 0.0886″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Extra Length Drill Bit: 0.0866″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Indexable Drill Insert: M30 CTPP430, Carbide TiAlN Finish, Square
• Indexable Drill Insert: M30 CTCP420, Carbide TiCN & Al2O3 Finish, Square
• 7/8-9 12″ OAL Equal Double Threaded Stud Alloy Steel, 2-1/4″ Equal Thread Length
• Drill Chamfer Inserts; Series: XCGT; Insert Size Code: 06; Insert Style: XCGT; Insert Material: Carbide; Chamfer Angle: 45.000; Insert Shape: Triangle; Manufacturer's Grade: IC808; Manufacturer Grade: IC808; Inscribed Circle (mm): 0.2433 in; Inscribed Cir
• Drill Chamfer Inserts; Series: XCGT; Insert Size Code: 06; Insert Style: XCGT; Insert Material: Carbide; Chamfer Angle: 60.000; Insert Shape: Triangle; Manufacturer's Grade: IC808; Manufacturer Grade: IC808; Inscribed Circle (mm): 0.2433 in; Inscribed Cir
• Drill Chamfer Inserts; Series: XCGT; Insert Size Code: 06; Insert Style: XCGT; Insert Material: Carbide; Chamfer Angle: 30.000; Insert Shape: Triangle; Manufacturer's Grade: IC808; Manufacturer Grade: IC808; Inscribed Circle (mm): 0.2433 in; Inscribed Cir
• Indexable Drill Insert: 01 BK6420, Carbide TiCN, Al2O3 & TiN Finish, Square
• Indexable Drill Insert: 03 BK8430, Carbide TiAIN & TiN Finish, Square
• Taper Length Drill Bit: 0.3906″ Dia, 118 ° Black Oxide Finish, 4.375″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Indexable Drill Insert: 13 BK7935, Carbide AlTiN Finish, Square
• Indexable Drill Insert: 13 BK8425, Carbide TiAlN & TiN Finish, Square
• Indexable Drill Insert: 21 BK7935, Carbide AlTiN Finish, Square
• Belt Sanding Machine: 60″ Long, 8″ Wide, Horizontal 7.5 hp, 3 Phase, 220 & 440V, 3,500 ft/min Belt Speed
• Indexable Drill Insert: 01 BK6115, Carbide TiCN, TiN & Al2O3 Finish, Square
• Indexable Drill Insert: 21 BK7710, Carbide TiB2 Finish, Square
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 3.00; Maximum Torque (Ft/Lb): 30.00; Overall Length (Decimal Inch): 9.9000; Head Type: Interc
• Indexable Drill Insert: 01 BK7615, Carbide TiCN & Al2O3 Finish, Square
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 4.50; Maximum Torque (Ft/Lb): 45.00; Overall Length (Decimal Inch): 15.5000; Head Type: Inter
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 0.70; Maximum Torque (Ft/Lb): 7.50; Overall Length (Decimal Inch): 10.6000; Head Type: Reversible R
• Taper Length Drill Bit: 0.0400″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.0810″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Cold Saws; Machine Style: Floor; Blade Diameter (Inch): 14; Blade Diameter: 14 in; Material Compatibility: Ferrous; Material Compatibility: Ferrous; Number of Cutting Speeds: 1; Horsepower: 3.00 hp; 3.00; Maximum Speed (RPM): 20.00; Maximum Speed: 20.0 RP
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 1.50; Maximum Torque (Ft/Lb): 15.00; Overall Length (Decimal Inch): 10.6000; Head Type: Reversible
• Taper Length Drill Bit: 0.0421″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.0860″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.0935″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Taper Length Drill Bit: 0.0595″ Dia, 130 ° Bright/Uncoated, 3″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.1015″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Taper Length Drill Bit: 0.1040″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• CD-RW Disc: Use with CD & DVD
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, Trigon
• Indexable Drill Insert: SOMT09DT IC5500, Carbide Coated, 60 ° Square
• High Visibility Belt White
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Hard Hat: Class E, 4-Point Suspension Orange, HDPE, Slotted
• Stationary Workstations; Number of Drawers: 0.000; Top Type: Melamine Top; Painted Steel; Width (Inch): 590.6; Length: 287.4020; Depth (Inch): 287.4; Depth (Inch): 287.4; Load Capacity (Lb.): 250.000; Load Capacity (Lb.): 250.000; Height (Inch): 905.5; Ty
• Stationary Workstations; Number of Drawers: 0.000; Top Type: Melamine Top; Painted Steel; Width (Inch): 590.6; Length: 287.4020; Depth (Inch): 287.4; Depth (Inch): 287.4; Load Capacity (Lb.): 250.000; Load Capacity (Lb.): 250.000; Height (Inch): 905.5; Ty
• Metal Push-To-Connect Tube Fittings; Fitting Type: ELBOW UNION; Connection Type: Push-to-Connect; Material: Brass; Tube Outside Diameter: 1/2; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT; End Connections
• Micro Drill Bit: 0.0689″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0768″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0756″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0752″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0748″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0709″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0713″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.076″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0685″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0732″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0776″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 150.00; Maximum Torque (Ft/Lb): 750.00; Overall Length (Decimal Inch): 53.7000; Head Type: Interchageable; Head Shape: R
• Micro Drill Bit: 0.078″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0681″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0772″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0677″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0724″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0673″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 1.50; Maximum Torque (Ft/Lb): 15.00; Overall Length (Decimal Inch): 8.9000; Head Type: Interc
• Micro Drill Bit: 0.072″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 0.70; Maximum Torque (Ft/Lb): 7.50; Overall Length (Decimal Inch): 8.9000; Head Type: Interch
• Micro Drill Bit: 0.0705″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Torque Wrenches; Wrench Type: Torque; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 120.00; Maximum Torque (Ft/Lb): 600.00; Overall Length (Decimal Inch): 41.4000; Head Type: Reversible Ratcheting; Fixed; Head
• Micro Drill Bit: 0.0717″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0764″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0736″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Micro Drill Bit: 0.0783″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Impact Socket: 6-Point, 8-3/4″ OAL
• Micro Drill Bit: 0.0701″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Belt Sanding Machine: 60″ Long, 8″ Wide, Vertical 7.5 hp, 3 Phase, 220 & 440V, 3,500 ft/min Belt Speed
• Micro Drill Bit: 0.0697″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0744″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0693″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.074″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1; Color: Black; Material: Vinyl; Size: 8-1/2x11; EPP Indicators: Biodegradable; Green Seal; USDA Certified BioBased; Forest Stewardship Council (FSC) Certified; Minimum Order Quantity: Vinyl; EPP GSA Co
• Electric Hoist: Pendant Controller, 2 Chains
• Welding Gloves: Size Large, Uncoated, Stick Welding Application Black & Red, Uncoated Coverage, Textured Grip
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 3/8; Fitting Shape: Tee; Maximum Working Pressure (Psi
• Indexable Drill Insert: M30 CTPP430, Carbide TiAlN Finish, Square
• Indexable Drill Insert: M30 CTCP420, Carbide TiCN & Al2O3 Finish, Square
• Indexable Drill Insert: XOMU06PS AH725, Carbide Coated, 80 ° Diamond
• Indexable Drill Insert: XOMU08PS AH725, Carbide Coated, 80 ° Diamond
• Indexable Drill Insert: XOMU07PS AH725, Carbide Coated, 80 ° Diamond
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.235″ ID, 0.513″ OD, 0.016″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.52″ ID, 0.744″ OD, 0.012″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.395″ OD, 0.054″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.559″ ID, 0.859″ OD, 0.035″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 0.342″ OD, 0.025″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.453″ ID, 0.666″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.207″ ID, 0.408″ OD, 0.034″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.233″ ID, 1/2″ OD, 0.036″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.507″ ID, 0.656″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.484″ ID, 0.749″ OD, 0.025″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.746″ OD, 0.026″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.562″ ID, 0.811″ OD, 0.056″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.437″ ID, 1″ OD, 0.044″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.229″ ID, 0.35″ OD, 0.027″ Thick
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 120.00; Maximum Torque (Ft/Lb): 600.00; Overall Length (Decimal Inch): 46.4000; Head Type: Interchageable; Head Shape: R
• Stationary Workstations; Number of Drawers: 5.000; Top Type: Melamine Top; Painted Steel; Width (Inch): 590.6; Length: 287.4020; Depth (Inch): 287.4; Depth (Inch): 287.4; Load Capacity (Lb.): 250.000; Load Capacity (Lb.): 250.000; Height (Inch): 905.5; Ty
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.246″ ID, 0.494″ OD, 0.025″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.642″ ID, 1″ OD, 0.057″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.508″ ID, 0.627″ OD, 0.048″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.796″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.471″ ID, 0.623″ OD, 0.021″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.503″ ID, 0.605″ OD, 0.013″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.503″ ID, 0.688″ OD, 0.028″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.871″ OD, 0.072″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.519″ ID, 0.741″ OD, 0.011″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.384″ ID, 0.62″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.456″ ID, 0.921″ OD, 0.054″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.581″ ID, 0.748″ OD, 0.021″ Thick
• Masking Tape: 48″ Wide, 60 yd Long, 6.7 mil Thick, Red Paper, Rubber Adhesive, 20 lb/in Tensile Strength
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.456″ ID, 5/8″ OD, 0.027″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.578″ ID, 0.971″ OD, 0.016″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.602″ ID, 3/4″ OD, 0.056″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.471″ ID, 0.921″ OD, 0.053″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.442″ ID, 0.628″ OD, 0.031″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.209″ ID, 0.445″ OD, 0.025″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.209″ ID, 0.437″ OD, 0.055″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.205″ ID, 0.327″ OD, 0.026″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.562″ ID, 0.999″ OD, 0.055″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.393″ OD, 0.04″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.468″ ID, 0.88″ OD, 0.054″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.204″ ID, 0.35″ OD, 0.028″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.234″ ID, 0.635″ OD, 0.054″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.548″ ID, 0.803″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.372″ OD, 0.051″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.237″ ID, 0.626″ OD, 0.045″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.453″ ID, 0.671″ OD, 0.051″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.314″ OD, 0.012″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.505″ ID, 5/8″ OD, 0.027″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.456″ ID, 0.69″ OD, 0.015″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.565″ ID, 0.814″ OD, 0.054″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.566″ ID, 0.749″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.481″ ID, 0.631″ OD, 0.026″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.46″ ID, 0.72″ OD, 0.056″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.248″ ID, 0.348″ OD, 0.028″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.622″ OD, 0.042″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.504″ ID, 0.941″ OD, 0.027″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.208″ ID, 0.492″ OD, 0.026″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.752″ OD, 0.055″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.553″ ID, 0.812″ OD, 0.033″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.578″ ID, 0.857″ OD, 0.055″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.568″ ID, 0.753″ OD, 0.06″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.521″ ID, 0.876″ OD, 0.016″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.222″ ID, 0.53″ OD, 0.05″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.597″ ID, 0.937″ OD, 0.03″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.44″ ID, 0.557″ OD, 0.053″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.473″ ID, 0.758″ OD, 0.007″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.524″ ID, 0.735″ OD, 0.025″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.237″ ID, 3/4″ OD, 0.056″ Thick
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.406″ OD, 0.03″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.877″ OD, 0.024″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.537″ ID, 0.998″ OD, 0.054″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.238″ ID, 0.308″ OD, 0.021″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.531″ ID, 0.812″ OD, 0.056″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.236″ ID, 0.343″ OD, 0.026″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.535″ ID, 7/8″ OD, 0.057″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.47″ ID, 0.933″ OD, 0.027″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.481″ ID, 0.922″ OD, 0.057″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.516″ ID, 0.939″ OD, 0.061″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.518″ ID, 0.936″ OD, 0.007″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.441″ ID, 0.561″ OD, 0.045″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.438″ ID, 0.752″ OD, 0.024″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.452″ ID, 0.623″ OD, 0.047″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.504″ ID, 1″ OD, 0.026″ Thick
• Depressed Center Wheel: Type 27, 4-1/2″ Dia, 1/4″ Thick, Ceramic 36 Grit
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.21″ ID, 0.466″ OD, 0.029″ Thick
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.447″ ID, 0.735″ OD, 0.013″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.477″ ID, 0.631″ OD, 0.028″ Thick
• Garden Hose Spray Nozzles; Nozzle Type: Cleaning Nozzle; Adjustable Nozzle; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Concentrated stream to gentls mist; Ergonomic Non-Slip Handle; One-handed Trigger Lock; Color: Aqua
• Garden Hose Spray Nozzles; Nozzle Type: Cleaning Nozzle; Adjustable Nozzle; Activation Method: Rear Trigger; Material: Plastic; Thread Type: GHT; Features: Concentrated stream to gentls mist; Ergonomic Non-Slip Handle; One-handed Trigger Lock; Color: Aqua
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.503″ ID, 0.609″ OD, 0.014″ Thick
• Compression Tube Fastseal Seal Assembly Mandrel: Tube Ends O-Ring Face Seal & Flat-Face Steel
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.428″ ID, 0.823″ OD, 0.05″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.479″ ID, 0.628″ OD, 0.027″ Thick
• 12″ Screw Standard Flat Washer: Steel, Uncoated 0.235″ ID, 0.626″ OD, 0.062″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.223″ ID, 3/4″ OD, 0.045″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.575″ ID, 0.945″ OD, 0.052″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.248″ ID, 0.562″ OD, 0.007″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.22″ ID, 0.385″ OD, 0.046″ Thick
• Plastic Bar: Garolite, 1/8″ Thick, Brown Rockwell M-100
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.518″ ID, 0.766″ OD, 0.014″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.564″ ID, 0.935″ OD, 0.054″ Thick
• 9/16″ Screw Standard Flat Washer: Steel, Uncoated 0.597″ ID, 1″ OD, 0.055″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.564″ ID, 0.876″ OD, 0.016″ Thick
• 5/8″ Screw Standard Flat Washer: Steel, Uncoated 0.538″ ID, 0.694″ OD, 0.03″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.484″ ID, 0.745″ OD, 0.019″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.565″ ID, 3/4″ OD, 0.026″ Thick
• Corner Chamfer End Mill: 5.00 mm Dia, 9.00 mm LOC, 3 Flute, 0.15 mm Chamfer Width, Solid Carbide
• 3/8″ Screw Standard Flat Washer: Steel, Uncoated 0.407″ ID, 0.813″ OD, 0.068″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.501″ ID, 0.609″ OD, 0.027″ Thick
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, 6″ Long, Opaque White, 4,000 psi Tensile Strength Shore D-60
• ER Collet: 6.00 mm Collet Size, Through Coolant
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.564″ ID, 0.906″ OD, 0.012″ Thick
• CNC Storage Accessories; For Use With: Tool Management Logistics System; Description: Assembly station octagonal RAL9010/RAL9005
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.218″ ID, 0.447″ OD, 0.034″ Thick
• 1/2″ Screw Standard Flat Washer: Steel, Uncoated 0.518″ ID, 0.999″ OD, 0.057″ Thick
• 7/16″ Screw Standard Flat Washer: Steel, Uncoated 0.472″ ID, 5/8″ OD, 0.028″ Thick
• Scrub & Scouring Brushes; Type: Scrub Brush; Bristle Material: Polypropylene; Overall Length (Decimal Inch): 20.00000; Overall Length (Inch): 20; Block/Handle Material: Plastic; Color: Yellow; Flagged: No; Application: Foodservice; Food Processing; Brush
• Electric Chain Hoist: 0.5 Ton Working Load Limit Pendant Controller, Hook Mount, 1 Chain
• Deep Groove Ball Bearing: 35 mm OD Bearing Number SS6300
• Electric Hoist: Pendant Controller, 1 Chain