Products

• Torque Gages; Capacity: 60 cNm
• Micro Drill Bit: 0.0938″ Dia, 130 °, Solid Carbide TiN Finish, 1.5″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Micro Drill Bit: 0.037″ Dia, 130 °, Solid Carbide TiCN Finish, 1.5″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Palm Sized, Child Resistant, Automatic Butane Torch with Flame Lock. Butane Torches
• Micro Drill Bit: 0.0571″ Dia, 130 °, Solid Carbide TiCN Finish, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series 302
• Plastic Bar: Acetal, 3/32″ Thick, Black Rockwell M-90
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A3, ANSI Puncture 1, Nitrile, HPPE Black, Palm Coated, HPPE Lined, HPPE Back, Nitrile Dipped Grip, ANSI Abrasion 6
• Lever Locksets; Lockset Type: Passage; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: None; Material: Metal; Door Thickness: 1-3/4; Finish: Flat Black Coated
• Flap Disc: 4-1/2″ Dia, 7/8″ Hole, 60 Grit, Zirconia Alumina, Type 27 Coated, Cloth-Backed, 13,300 RPM
• Plastic Sheet: Garolite, 1/8″ Thick, 6″ Long, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Label Maker Label: White, Polypropylene, 2,000 per Roll
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: Up to 1″; Color: Black; Material: Leather Grain; Size: 8-1/2x11; Minimum Order Quantity: Leather Grain; Material: Leather Grain
• Torque Gages; Capacity: 36 cNm
• Polytetrafluroethylene Film Tape: 12″ Wide, 36 yd Long, 3.7 mil Thick 22 Lb/In Tensile Strength, Silicone Adhesive, 500 ° F
• Cut & Puncture-Resistant Gloves: Size XS, ANSI Cut A6, ANSI Puncture 5, Nitrile, Kevlar Black & Green, 8.25″ OAL, Palm Coated, Aramid Lined, Foam Grip
• Manual Ball Valve: 1/4″ Pipe, Standard Port
• Pipe & Tube Reamers; Type: Reaming Pen; Maximum Pipe Capacity (Inch): 8 in; 8; Maximum Pipe Capacity (mm): 8 in; Minimum Pipe Capacity: 0 in; Minimum Pipe Capacity: 0; 0 in; Maximum Pipe Capacity: 8 in; Cuts Material Type: PVC; Copper; Overall Length (Inc
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D11 Series 14101
• Thread Forming Tap: 1/4-20, UNC, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.628″ Thread Length, 2.5″ OAL, H11, Series 14001
• Cooling Headband: Size XL, Black, Red & Gray Camouflage, Cotton
• Cooling Headband: Size XL, Black & Red None, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D5 Series 14101
• Cooling Headband: Size L, Black, Red & Gray Camouflage, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Cooling Headband: Size L, Gray Camouflage, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D6 Series 14101
• Cooling Headband: Size L, Black & Red None, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D11 Series 14101
• Chemical Resistant Gloves: X-Large, 8 Thick, Polyurethane-Coated, Polyurethane, Unsupported Blue, 10.8'' OAL, Rough, ANSI Cut A1, ANSI Abrasion 4, ANSI Puncture 1
• Cooling Headband: Size L, Black None, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D9 Series 14101
• Cooling Headband: Size XL, Gray Camouflage, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D10 Series 14101
• Cooling Headband: Size XL, Black None, Cotton
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D9 Series 14101
• Thread Forming Tap: 1/4-20, UNC, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.628″ Thread Length, 2.5″ OAL, H12, Series 14001
• Mobile Battery Lift Table: 500 lb Capacity, 7 to 35″ Lift Height, 12″ Platform Width, 28″ Platform Length 7″ to 35″ Lift Height, 28″ Platform Length x 12″ Platform Width
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thermal Imaging Scanner for Skin Temperature Set of 2
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D5 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D10 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D8 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D14 Series 14101
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D7 Series 14101
• Thread Forming Tap: 1/4-28, UNF, Modified Bottoming, High Speed Steel-CO, TiCN Finish 0.61″ Thread Length, 2.5″ OAL, H11, Series 14001
• Thread Forming Tap: Metric, Modified Bottoming, High Speed Steel-CO, TiCN Finish D5 Series 14101
• Depressed Center Wheel: Type 27, 9″ Dia, 1/8″ Thick, Ceramic 6,650 Max RPM, Use with Cutter & Grinder
• Saw Machine Parts & Accessories; Accessory Type: Hydraulic Nesting Fixture; For Use With: AH300H Horizontal Bandsaw; Size (Decimal Inch): 12; For Use With: AH300H Horizontal Bandsaw; Size (Inch): 12
• 5/8-11 14″ OAL Equal Double Threaded Stud Alloy Steel, 1-3/4″ Equal Thread Length
• Brass Pipe Reducing Hex Coupling: 3/8 x 1/8″ Fitting, FNPT x FNPT FNPT x FNPT Ends, 2,200 psi, Brass Finish, Class Instrumentation
• Lifting Magnet: 4,400 lb Limit 2 Pole
• Plastic Sheet: POM, 3/8" Thick, 24" Wide, 2' Long, Natural, 9700 psi Tensile Strength
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8758; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9299; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Plastic Sheet: POM, 2" Thick, 12" Wide, 4' Long, Natural, 9700 psi Tensile Strength
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9362; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Thumb Screws & Hand Knobs; System of Measurement: Inch; Head Type: Knurled; Shoulder Type: Without Shoulder; Overall Length: 3.5475 in; Tip Type: Swivel Pad; Material: Steel; Material Grade: C-12L14; Finish: Black Oxide; Overall Length (Decimal Inch): 3.5
• Taper Length Drill Bit: 0.1405″ Dia, 118 ° Black Oxide Finish, 3″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Taper Length Drill Bit: 0.1470″ Dia, 118 ° Black Oxide Finish, 3″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Taper Length Drill Bit: 0.1850″ Dia, 118 ° Black Oxide Finish, 3.375″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Taper Length Drill Bit: 0.1590″ Dia, 118 ° Black Oxide Finish, 3.375″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Taper Length Drill Bit: 0.1695″ Dia, 118 ° Black Oxide Finish, 3.375″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Hand Hex & Torx Bit Sockets; Socket Type: Hex Bit Socket; Tool Type: Hex Bit Socket; Hex Size (Inch): 1/8 in; Bit Length (Inch): 2-3/4; Bit Length: 2.75 in; Insulated: No; Material: Steel; Finish: Chrome-Plated; Overall Length (Inch): 2-3/4 in; Non-sparki
• Label Maker Label: White, Polyimide, 10,000 per Roll
• Taper Length Drill Bit: 0.1102″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• Metal Push-To-Connect Tube Fittings; Fitting Type: BULKHEAD; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/4; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Le
• 3' Surface Vertical Rod Antimicrobial Coated Satin Stainless Steel Finish
• Sheet: Silicone Rubber, 6″ Wide, 6″ Long, Red Durometer 40, High Temperature Adhesive Backing
• Tank Flanges; Overall Height (Inch): 21/32
• 3' Surface Vertical Rod Antimicrobial Coated Satin Stainless Steel Finish
• Black 45 ° Elbow: 3/4″, Threaded Steel, Black Finish, Class 3000, ANSI/ASME B1.20.1, ANSI/ASME B16.11-MSS SP-83 & ASTM A105
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 3/8″ Thick, 6″ Long, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Safety Glass: Scratch-Resistant, Clear Lenses, Full-Framed Black & Red Frame, Dual
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9977; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• Push-To-Connect Tube Fitting: Male Wye, 3/8″ OD Nylon, 350 psi
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Orange Traffic Cone with Base & PVC Cone, Recycled PVC Base
• 300 mL Cartridge, Red RTV Silicone Gasket Maker -75 to 650° F, 24 hr Full Cure Time
• Door Closer Accessories; For Use With: LCN 4640 Series Power Operators Auto Equalizer Door Closer; Body Length: 8.5; For Use With: LCN 4640 Series Power Operators Auto Equalizer Door Closer
• Drum Cart: (1) 55 gal Drum Wesco Stacker Carriage Mounted Manual Drum Rotator.
• Plastic Sheet: Cast Acrylic, 3/16″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 16' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 16' Long x 10' Wide, 5 mil Polyethylene, Rectangle
• Ironworkers; Throat Depth (Inch): 1-37/64; Punching Capacity (Inch): 25/32 diam. in 15/64 Stainless Steel; 25/32 diam. in 5/16 General Steel; Includes: XPP01 (SC05340100); (1) Nut Bar (SC03505300); (1) 8 mm/10 mm Spanner Wrench (SC00000166); (1) 15/32 in
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Opaque White Shore D-60
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 70, Plain Backing
• MIG Welding Wire: 0.025″ Dia 2 lb
• Milling Chuck Accessories; Type: Wrench; For Use With: Mfr. No. 5867; Compatible Hole Diameter: 12.70 mm; Material: Steel; Accessory Type: Wrench
• Torque Gages; Capacity: 15 Lbf-in
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Black Shore D-60
• Thread Forming Tap: #8-32, UNC, Plug, High Speed Steel, TiN Finish 3/4″ Thread Length, 2-1/8″ OAL, H7, Series 776
• Push-To-Connect Tube Fitting: Male Branch Tee, 1/2″ OD Polybutylene, 350 psi
• Pipe Bushing: 3/4 x 1/2″ Fitting, 304 Stainless Steel FNPT x MNPT, 150 psi
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 60.00; Maximum Torque (Ft/Lb): 300.00; Overall Length (Decimal Inch): 23.9000; Head Type: Interchageable; Head Shape: Re
• 2 x 2″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• Push-To-Connect Tube Fitting: Male Run Tee, 1/2″ OD Polybutylene, 350 psi
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: SFJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT9080; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: SFC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Saw Machine Parts & Accessories; Accessory Type: Power Roller Table; For Use With: AH400H Horizontal Bandsaw; Size (Feet): 7.50; For Use With: AH400H Horizontal Bandsaw
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Cut-Off Inserts; Insert Style: SFJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool:
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT7220; Insert Holding Method: Clamp; Lead Angle Direction: Left Hand; Insert Hand: Left Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-use
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 15.000; Relief Angle: 7.000; Multi-us
• Lubricant: 7 oz Can
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 2; Insert Material: Solid Carbide; Manufacturer Grade: TT8020; Insert Holding Method: Clamp; Lead Angle Direction: Right Hand; Insert Hand: Right Hand; Lead Angle: 6.000; Relief Angle: 7.000; Multi-use
• Welding Gloves: Size Large, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Welding Gloves: Size Medium, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Welding Gloves: Size X-Large, Uncoated, TIG Welding Application Black & White, Uncoated Coverage, Textured Grip
• Taper Length Drill Bit: 0.0610″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Disposable Washable Mask: Tan, Size Universal Tan, Solid Pattern, Ear Loop Closure
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1 1/2″; Color: Red; Material: Vinyl; Size: 8-1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1-1/2″; Color: Blue; Material: Vinyl; Size: 8-1/2 X 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Metal Push-To-Connect Tube Fittings; Fitting Type: 45 ™ EL; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/2; Fitting Shape: 45 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards
• Power Pallet Truck: 4,400 lb Capacity, 27-3/4″ OAW, 27″ Forks 3″ Min Lift Height, 45-1/4″ Fork Length x 27″ Fork Width, 27-3/4″ Overall Width
• Cut-Resistant Gloves: Size 2XL, ANSI Cut A6, Nitrile, Polyester Blend Black, 9.84″ OAL, Palm & Fingers Coated, Polyester Lined, Stainless Steel & Polyester Back, Nitrile Dipped Grip
• Cut-Resistant Gloves: Size XL, ANSI Cut A6, Nitrile, Polyester Blend Black, 9.84″ OAL, Palm & Fingers Coated, Polyester Lined, Stainless Steel & Polyester Back, Nitrile Dipped Grip
• Safety Glass: Anti-Fog & Scratch-Resistant, Polycarbonate, Gray Lenses, Frameless, UV Protection Dual
• #10-32 UNF 3/4″ Length Under Head Slotted Thread Cutting Screw Grade 2 Steel, Pan Head, Type F Point, Zinc-Plated
• Torque Gages; Capacity: 9 ozf-in
• Micro Drill Bit: 0.0236″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Torque Wrenches; Wrench Type: Torque; Drive Type: Rectangular Cavity; Torque Measurement Type: Foot Pound; Inch Pound; Minimum Torque (Ft/Lb): 60.00; Maximum Torque (Ft/Lb): 300.00; Overall Length (Decimal Inch): 23.9000; Head Type: Interchageable; Head S
• Micro Drill Bit: 0.0551″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0472″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0315″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0512″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0295″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Refrigerated Air Dryers; Pipe Size: 1/2; End Connections: NPT; Horsepower: 10; Voltage: 115; Cubic Feet per Minute: 35.00; Type: Refrigerated Air Dryer
• Taper Length Drill Bit: 0.0866″ Dia, 130 ° Nitrided Land Finish, 2.3228″ Flute Length, 3.5433″ OAL, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Cut-Off Inserts; Insert Style: TSC; Insert Size Code: 6; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Cut-Off Inserts; Insert Style: TSJ; Insert Size Code: 6; Insert Material: Solid Carbide; Manufacturer Grade: K10; Insert Holding Method: Clamp; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0.000; Relief Angle: 7.000; Multi-use Tool: Ye
• Taper Length Drill Bit: 0.0354″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 219
• Taper Length Drill Bit: 0.1004″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Indexable Drill Insert: SPMX YG602, Carbide TiAlN Finish, 29/64″ Inscribed Circle, 1/32″ Corner Radius
• Taper Length Drill Bit: 0.0965″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Tool Presetter Accessories; Type: Software; For Use With: Indexing
• Taper Length Drill Bit: 0.0421″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Taper Length Drill Bit: 0.0430″ Dia, 118 ° Coated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5537
• Taper Length Drill Bit: 0.0890″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.0410″ Dia TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Lockset Accessories; Type: Service Equipment; For Use With: Best; Cylinder Type: None; PSC Code: 5340; Type: Service Equipment; For Use With: Best
• Manual Hand Chain Hoist 1 Chain
• Clamps For Indexables; Type: Lever; Clamp Style: KN; Industry Standard Number: KN127; Series: KN127
• Torque Wrenches; Wrench Type: Quick Release; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 30.00; Maximum Torque (Ft/Lb): 150.00; Overall Length (Decimal Inch): 20.7000; Head Type: Reversible Ratcheting; Fixed;
• Rotary Tool Holder Hardware; Type: Drive Key; Tenon Screw; Hardware Drive Size: 22.00 mm; Compatible Tool Type: Shell Mill Holders; Compatible Connection Size: BT40; BT50; C6; C8; Compatible Taper Size: BT40; BT50; C6; C8; Overall Length: 0.04; Product Ty
• Masking Tape: 57″ Wide, 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• FEP Tube: 3/8″ ID x 1/2″ OD, 2' Long 160 Max psi, Clear
• Ironworkers; Throat Depth (Inch): 1-37/64; Punching Capacity (Inch): 25/32 diam. in 15/64 Stainless Steel; 25/32 diam. in 5/16 General Steel; Includes: XPP01 (SC05340100); (1) Nut Bar (SC03505300); XPP01 (SC00000215); (1) 8 mm/10 mm Spanner Wrench (SC0000
• Pipe Fitting: 1/4 x 1/4″ Fitting, 304 Stainless Steel 6,200 psi
• Coolant Adapters & Collars For Indexables; Type: Coolant Kit; Indexable Tool Type: Reaming; Toolholder Style Compatibility: PMX05; Series: PMX05; Toolholder Style Compatibility: PMX05; Product Type: Coolant Kit
• Plastic Sheet: Garolite, 1/16″ Thick, 6″ Long, Off-White, 39,000 psi Tensile Strength Rockwell M-110
• Power & Impact Screwdriver Bits & Holders; Bit Type: Tri-Wing; Power Bit; Hex Size (Inch): 1/4 in; Blade Width (Decimal Inch): 0.2800; Blade Thickness (Decimal Inch): 0.2800; Drive Size: 1/4 in; Body Diameter (Inch): 1/4 in; Specialty Point Size: #5 Tri-W
• Automatic Dishwasher Powder
• Ball Grip Quick-Release Pin: Ring Handle, 9/16″ Pin Dia, 1-1/4″ Usable Length 2.83″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• #2 Screw 9/32″ OAL 0.09″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• #6 Screw 9/32″ OAL 0.14″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• #6 Screw 5/32″ OAL 0.14″ ID x 1/4″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Impact Socket: 6-Point, 7-13/16″ OAL
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6406; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• 5/16″ Screw 2-1/2″ OAL 0.315″ ID x 3/4″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Tarp/Dust Cover: Blue, Rectangle, Polyethylene, 14' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Torque Wrenches; Wrench Type: Quick Release; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Nm; Minimum Torque (Ft/Lb): 30.00; Maximum Torque (Ft/Lb): 150.00; Overall Length (Decimal Inch): 20.2000; Head Type: Reversible Ratcheting; Fixed;
• Tarp/Dust Cover: Green, Rectangle, Polyethylene, 14' Long x 12' Wide, 5 mil Polyethylene, Rectangle
• Striping Spray Paint: Galaxy, Textured, 12 oz Use on Metal & Wood
• Glass Cloth Tape; Width (Inch): 6; Material Type: PTFE; Color: Brown; Adhesive Material: Silicone; Length (yd): 36.00; Thickness (mil): 8.2000; Tensile Strength (Lb./Inch): 175.00; Minimum Operating Temperature (F): -100.000; Maximum Operating Temperature
• Extra Length Drill Bit: 0.1299″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Door Closer Accessories; For Use With: LCN 9540 Series Power Operators Senior Swing Door Operator; For Use With: LCN 9540 Series Power Operators Senior Swing Door Operator
• 1″ Screw 1″ OAL 1″ ID x 1-1/2″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Powder Actuated Pins & Threaded Studs; Type: Drive Pin; Shank Length (Inch): 1-1/2; Shank Diameter (Decimal Inch): 1.5000; Head Diameter (mm): 8.000; Material: Steel; Thread Length (Inch): 0; Finish/Coating: Zinc; Material Application: Concrete
• Deep Groove Ball Bearing: 32 mm OD, 0.3937″ Wide, Double Shield Bearing Number 6201
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 5″ Usable Length 6.58″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Tank Flanges; Overall Height (Inch): 1
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 5″ Usable Length 6.58″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 5/8″ Pin Dia, 2″ Usable Length 3.84″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Packaging Tape: 3″ Wide, 60 yd Long, 6 mil Thick, Kraft Kraft Paper, Pressure Sensitive Rubber Adhesive, 33 lb/in Tensile Strength
• Hardware For Indexables; For Use With: Toolholder; Type: Accessory
• Impact Socket: 6-Point, 7-13/16″ OAL
• Torque Wrenches; Wrench Type: Digital Torque Wrench; Drive Type: Square Drive; Torque Measurement Type: Foot Pound; Inch Pound; Nm; Minimum Torque (Ft/Lb): 0.70; Maximum Torque (Ft/Lb): 15.00; Overall Length (Decimal Inch): 8.3000; Head Type: Reversible R
• Torque Gages; Capacity: 4.5 ozf-in
• 3' Heavy Duty Rim Fire Rated, Antimicrobial Coated Satin Stainless Steel Finish
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• 3' Heavy Duty Rim Fire Rated, Antimicrobial Coated Satin Stainless Steel Finish
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Sheet: Buna-N Rubber, 12″ Wide, 18″ Long, Black Durometer 40, Plain Backing
• Torque Gages; Capacity: 18 ozf-in
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Plain Backing
• Plastic Bar: Polytetrafluoroethylene, 1/8″ Thick, White
• Plastic Rod: Acetal, 1' Long, 1-1/4″ Dia, Black Rockwell M-90
• Compression Tube Connector: 1/8″ Thread, Compression x MNPT Zinc-Plated Steel
• Tank Flanges; Overall Height (Inch): 3/4
• Spade Drill Accessories; Type: Torx Hand Driver; Accessory Type: Torx Hand Driver; Drill Diameter Range: 0.5320 - 0.6100; Series: 4
• Spade Drill Accessories; Type: Torx Hand Driver; Accessory Type: Torx Hand Driver; Drill Diameter Range: 0.5320 - 0.6100; Series: 04
• Planer Machines; Cutting Width (Inch): 20; Cutting Width (mm): 508.00; Maximum Cutting Thickness: 3 to 165 mm; 1/8 to 6-1/2 in; Maximum Cutting Width: 20 in; 508.0 mm; Depth of Cut (mm): 6.35; Depth of Cut (Inch): 1/4; Depth Of Cut: 6.35 mm; Number Of Cut
• Spade Drill Accessories; Type: Torx Hand Driver; Accessory Type: Torx Hand Driver; Drill Diameter Range: 0.5320 - 0.6100; Series: 4
• Threaded Rod: 5/16-18, 6' Long, Stainless Steel, Grade 304 (18-8)
• Plastic Sheet: Polyvinylchloride, 3/16″ Thick, 6″ Long, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4921; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• Ball End Mill: 0.50 mm Dia, 0.40 mm LOC, 2 Flute, Solid Carbide
• 5/16″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 3/8″ ID, 7/8″ OD, 0.148″ Thick
• Wire Disconnects; Gender: Female; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 4.0-6.0; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Yellow; Contact Materia
• Wire Disconnects; Gender: Male; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 4.0-6.0; Tab Width (Decimal Inch): 0.25; Tab Width (mm): 6.34 mm; 0.25 in; Color: Yellow; Contact Material:
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1320; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standar
• Paper Towels: Perforated Roll, 6 Rolls, Roll, 2 Ply, Recycled Fiber, White 11″ Wide, 135' Roll Length, 810 Sheets
• Tool Presetter Accessories; Type: Software; For Use With: HAIMER Tool Dynamic Balancing Machine
• Push-To-Connect Tube Fitting: Male Branch Tee, 3/8″ OD Polybutylene, 350 psi
• 10″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 7/32″ ID, 1/2″ OD, 0.109″ Thick
• Strip: Buna-N Rubber, 1/4″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Torque Gages; Capacity: 12 cNm
• Compression Tube Connector: 3/8″ Thread, Compression x MNPT Zinc-Plated Steel
• Spot Welder Tips; Tip Type: Straight Tip C Nose (Flat); Material: RWMA Class 1 - C15000; Type: Straight Tip C Nose (Flat)
• Pipe Fitting: 1/2 x 1/2″ Fitting, 316 Stainless Steel 150 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6837; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Strip: Neoprene Rubber, 1/2″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Pipe Bushing: 3/4 x 1/2″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Tank Flanges; Overall Height (Inch): 27/32
• Clamp Handle Grips; For Use With: Utensils; Small Tools; Gauges; Grip Length: 4.9700; Material: Die Cast Zinc; Length (Decimal Inch): 4.9700; Material: Die Cast Zinc
• Disposable Coveralls: Size 5X-Large, 0.4238 oz, Multi-Layer Non-Woven Barrier Laminate Fabric, Double Zipper Closure
• Lever Locksets; Lockset Type: Storeroom; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4 to 2; Finish: Satin Stainless Steel
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Plastic Bar: Cast Acrylic, 1/4″ Thick, Clear Rockwell M-95
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/16″ Thick, 6″ Long, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Ironworkers; Throat Depth: 3.75 in; Punching Pressure: 40; Punching Capacity: 3/8 in; Hydraulic Pressure: 3000; Pipe Notching Capacity: 1/4 x 1-3/4 x 2; Pipe Notching Capacity In Schedule 40 Id: 2 in; Shearing Capacity At 45 Degrees: 3 x 3 x 1/4; Shearing
• Plastic Sheet: Garolite, 1/32″ Thick, 6″ Long, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.25 in; Material: Bi-Metal; Application: Wood & Nails, Copper Pipe, Wood, PVC, Drywall; Includes: (1) Imp
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.125 in; Material: Bi-Metal; Application: Metal (Non-Ferrous), Wood & Nails, Wood, PVC, Drywall; Includes
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 2.5 in; Material: High Carbon Steel; Application: Hardwood, Wood, PVC, and Drywall; Includes: (1) Imperia
• Electric Hoist: Pendant Controller, 1 Chain
• Pipe Bushing: 1 x 3/4″ Fitting, 316 Stainless Steel FNPT x MNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, White Rockwell M-95
• Cut & Puncture Resistant Sleeves: Size L, Kevlar, Gray, ANSI Cut A4 Knit Wrist Closure, Seamless, Cut-Resistant, Use for Automotive, Automotive Aftermarket, Equipment & Food Processing
• #4-40, 2.4369″ OAL, 1/4″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 2-1/4″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade T-3, Uncoated
• M3x0.5 Coarse 10mm Long 6-Lobe Pin Thread Cutting Screw 12L14 Steel, Pan Head, Self Drilling Point, Zinc-Plated
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9849; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0230; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8603; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9053; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8821; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9271; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 4″ Usable Length 5.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Strip: Neoprene Rubber, 3/8″ Wide, 120″ Long, Black Durometer 70, Plain Backing