Products

• Taper Length Drill Bit: 0.0925″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/4″; Tube Outside Diameter: 1/2; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9671; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Indexable Drill Insert: WCMXM1 CA6535, Carbide TiCN, Al2O3 & TiN Finish, 80 °
• Slotted Drive 1/4-20″ UNC, 1-1/8″ Length Under Head Captive Screws 18-8 Stainless Steel, 1/2″ Head Diam, 9/16″ Head Height, Uncoated
• Pipe Fitting: 1/2″ Fitting, 304 Stainless Steel 150 psi
• Micro Drill Bit: 0.02″ Dia, 135 ° Bright/Uncoated, 4″ OAL, Spiral Flute
• Deep Groove Ball Bearing: Bearing Number R7-X20-2RS
• Taper Length Drill Bit: 0.0625″ Dia, 130 ° Bright/Uncoated, 3″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Vulcan Clutch[REG] Orange Rechargeable Lantern with Clamping Handle and Swivel Neck
• Taper Length Drill Bit: 0.0730″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Taper Length Drill Bit: 0.0846″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Taper Length Drill Bit: 0.0886″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Extra Length Drill Bit: 0.0984″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• M3 Screw 16mm OAL 3.2mm ID x 4.5mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Extra Length Drill Bit: 0.1181″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Taper Length Drill Bit: 0.0938″ Dia, 118 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 5536
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1 1/2″; Color: Red; Material: Vinyl; Size: 8-1/2x11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Metal Push-To-Connect Tube Fittings; Fitting Type: BULKHEAD; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 1/2; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• Cup Brush: 3″ Dia, 0.014″ Wire Dia, Carbon Steel, Crimped 5/8-11 Arbor Hole, 7/8″ Trim Length, 14,000 Max RPM
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1 1/2″; Color: Camouflage; Material: Vinyl; Size: 8-1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Stainless Steel Pipe Nipple: 1/2″ Pipe, Grade 316 Schedule 40
• Stainless Steel Pipe Nipple: 3/8″ Pipe, Grade 304 Schedule 40
• 4″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 1/8″ ID, 5/16″ OD, 0.065″ Thick
• Handheld Tape Dispensers; Tape Core Diameter: 3 in; Material: Steel; For Use With: Box Sealing Tape; Tape Width: 2 in; Dispenser Material: Steel; For Tape Width: 2 in; Tape Core Diameter: 3 in
• Strip: Silicone Rubber, 1/4″ Wide, 120″ Long, Red Durometer 60, Plain Backing
• Black 90 ° Street Elbow: 1″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 1″ Usable Length 2.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• General Purpose Work Gloves: 2X-Large, Synthetic Black & Red, Textured Grip
• Rotary & Multi-Tool Accessories; Accessory Type: Blade; For Use With: One Fit ™ Anchor Fits All Major Brands of Non-Starlock Tools; Attachment Size: 1.25 in; Material: High Carbon Steel; Application: For use in Hardwood, Wood, PVC, and Drywall; Includes:
• Wire Disconnects; Gender: Female; Insulation Type: Fully Insulated; Insulation Material: Nylon; Connection Type: Crimp; Compatible Wire Size (sq mm): 1.5-2.5; Tab Width (Decimal Inch): 0.187; Tab Width (mm): 0.187 in; 4.75 mm; Color: Blue; Contact Materia
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9590; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 15 fl oz White Marking Paint 300' to 350' Coverage at 1-1/2″ Wide, Solvent-Based Formula
• Engraving Cutters; Cutter Diameter (Inch): 1/4; Cutter Diameter (Decimal Inch): 0.2500; Point Shape: Tipped Off; Shank Diameter (Decimal Inch): 0.2500; Shank Diameter (Inch): 1/4
• 15 fl oz Blue Marking Paint 300' to 350' Coverage at 1-1/2″ Wide, Solvent-Based Formula
• DRO Brackets & Mounting Hardware
• 15 fl oz Red Marking Paint 300' to 350' Coverage at 1-1/2″ Wide, Solvent-Based Formula
• Reciprocating Saw Blades; Blade Material: Bi-Metal; Blade Length (Inch): 6; Blade Width (Inch): 1; Teeth Per Inch: 10; Blade Thickness (Decimal Inch): 0.0420
• Drill Chuck: 1/2" Capacity, Jacobs Taper Mount, Size 1 Quick Change
• Tank Flanges; Overall Height (Inch): 3/4
• Hook & Loop Disc: 6" Dia, 80 Grit, Coated, Aluminum Oxide
• Interchangeable-Head Hobby Hammer
• 5/16″ Screw 3″ OAL 0.315″ ID x 3/4″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Black 45 ° Elbow: 1/8″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Ball End Mill: 12.00 mm Dia, 12.50 mm LOC, 2 Flute, Solid Carbide
• Precision & Specialty Screwdrivers; Tool Type: Precision Slotted Screwdriver; Blade Length (mm): 3; Shaft Length: 75 mm; Handle Length: 175 mm; Handle Color: Black; Green; Finish: Chrome-Plated; Body Material: Chrome Alloy Steel; Overall Length (Inch): 6.
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8728; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.0018 in; Inside Diameter (mm): 16 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 0.75 in; Plate Thickness Toleran
• Tank Flanges; Overall Height (Inch): 9/16
• Pipe Fitting: 1/8 x 1/8″ Fitting, 304 Stainless Steel 9,400 psi
• Standard Straight Line Action Clamp: 200 lb Load Capacity, 0.7874″ Plunger Travel, Steel 0.37″ Plunger Dia, Straight Handle
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Satin Stainless Steel; Minimum Door Width: 3 ft
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9018; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Spot Welder Tips; Tip Type: Threaded Tip E Nose (Truncated); Material: RWMA Class 2 - C18200; Type: Threaded Tip E Nose (Truncated)
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8474; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Chipbreakers For Indexables; Shape: Square; Compatible Included Angle: 90; Chipbreaker Code: PK; Insert Inscribed Circle: 0.7500 in; Thickness (Decimal Inch): 0.1875 in; Cutting Direction: Left Hand; Right Hand; Tool Material: Carbide; Thickness: 0.1875 i
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6773; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Bar: Polycarbonate, 1/4″ Thick, Clear
• Plastic Bar: Polycarbonate, 1/8″ Thick, Clear
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Micro Drill Bit: 2.80 mm Dia, (0.1100"), 180 deg, Solid Carbide
• Push-to-Connect x FNPT Tube Fitting: Elbow, 1/8″ Thread, 5/32″ OD Polybutylene, 150 psi
• Panel Rivets; Type: Panel Rivet; Shank Type: Ratchet; Minimum Hole Diameter: 0.25 in; Head Type: Round; Maximum Hole Diameter: 0.25 in; Minimum Hole Diameter (Decimal Inch): 0.2500; Maximum Hole Diameter (Decimal Inch): 0.2500; Overall Length: 1.141 in
• #6-32, 1-3/8″ OAL, 1/4″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/8″ Body Length, 1/4″ Thread Length, 3/8″ Thread Depth, Grade T-3, Uncoated
• #6 Screw 1-3/16″ OAL 0.14″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Hex Head Cap Screws
• Handlesets; Type: Trim; Door Thickness: 1-3/4
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8789; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Nylon Tube: 3/32″ ID, 5/32″ OD, 25' Long 500 Max psi, Black
• Plastic Bar: Acetal, 1/8″ Thick, Black Rockwell M-90
• Strip: Neoprene Rubber, 1/4″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Plastic Bar: Garolite, 1/8″ Thick, Brown Rockwell M-100
• Plastic Bar: Garolite, 1/8″ Thick, Brown Rockwell M-100
• FlexC 80 Quick-Change Collet 2-1/2" Round Serrated
• 5/8-18 Thread, 1-3/8″ Yoke Width, Mild Carbon Steel, Clevis Pin Yoke 5/8″ Hole Diam, 3-11/16″ Hole Center to Neck, 4-1/4″ Yoke Arm Height, 1-1/16″ Neck Diam, 1-1/4″ Neck Length, 4-15/16″ OAL
• Push-To-Connect Tube Fitting: Female Elbow, 1/8″ OD Polybutylene, 350 psi
• Deep Groove Ball Bearing: 62 mm OD Bearing Number 6007
• Miniature Manual Ball Valve: 3/8″ Pipe, Full Port, Brass 2-Way Flow & In-Line, MNPT x FNPT, 450 psi WOG
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9059; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9250; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0268; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9807; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9613; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Enamel Spray Paint: Red Orange, Gloss, 16 oz Outdoor, Use on Aisles, Emergency, Machinery & Production Equipment, Safety Equipment & Steel Bars
• Wall Plates; Wall Plate Type: Switch Plates; Wall Plate Configuration: Barrel Key Switch; Shape: Rectangle; Wall Plate Size: Standard; Number of Gangs: 1; Overall Length (Inch): 4-1/2; Overall Width (Decimal Inch): 2.8700; Overall Width (mm): 2.8700 in; S
• Turning Insert: TCMT32.51MW4 WSM20S, Carbide
• PVC Tube: 1/2″ ID, 3/4″ OD, 5' Long 20 Max psi, Yellow
• Deep Groove Ball Bearing: 37 mm OD 625 lb Static Load
• Tank Flanges; Overall Height (Inch): 3/4
• 300 mL Cartridge, Black RTV Silicone Gasket Maker -65 to 500° F, 24 hr Full Cure Time
• Masking Paper: 120" Wide, 7.3 mil Thick, Clear
• Black 90 ° Elbow: 1-1/4 x 3/4″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Garden Hose Spray Nozzles; Type: Pre-Set Watering Wand; Style: Thumb Control; Material: Plastic; Metal; Color: Aqua; Thread Size (Inch): 3/4; Description: 5-Pattern Compact Pre-Set Watering Wand with Swivel Connect; Description: 5-Pattern Compact Pre-Set
• Lawn Sprinklers; Type: Sprinkler; Thread Size: 3/4; Base Style: None; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Bubbler
• Sheet: Neoprene Rubber, 12″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 50, Plain Backing
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, White
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• 1-1/2 x 2″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 4″ Usable Length 5.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Sheet Gasketing; Width (Inch): 6; Thickness: 1/64; Length (Inch): 6.0000; Color: Off-White; Material: Aramid Fiber with SBR Rubber Blend; Maximum Working Pressure: 1450; Length (Inch): 6; Minimum Temperature (F): 0.000; Material: Aramid Fiber with SBR Rub
• #4 Screw 5/32″ OAL 0.115″ ID x 3/16″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Hex Head Cap Screw: 3/4-16 x 4-1/2″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1″; Color: Blue; Material: Polyethylene; Size: 8-1/2 x 11; Minimum Order Quantity: Polyethylene; Material: Polyethylene
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 7/8 - 9 in; 7/8 - 9; Overall Length (Inch): 6; Overall Length (Decimal Inch): 6 in; Overall Length (mm): 6 in; Material: Alloy Steel; Finish/Coating: Plain; Class: 2A; Grade:
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1″; Color: White; Material: Polyethylene; Size: 8-1/2x11; Minimum Order Quantity: Polyethylene; Material: Polyethylene
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Metal Push-To-Connect Tube Fittings; Fitting Type: EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 1/4; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8494; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White
• Plastic Bar: Acetal, 1/16″ Thick, White
• Threaded Ball Plunger: 1/4-20, 0.125″ Ball Dia, 17/32″ Body Length, 0.035″ Max Ball Reach 3 lb Initial End Force, 7 lb Final End Force, Stainless Steel Body, Nylon Ball, Locking Element
• Personal Insect Repellents; Type: Aerosol Spray; Targeted Pest: Insects; Container Size: 6 oz; Container Type: Can; Protection Time: 8 h; Container Size: 6 oz
• M20x2.5 175mm OAL Unequal Double Threaded Stud Carbon Steel, 55mm Long Thread Length, 20mm Short Thread Length, Metric
• Thread Forming Tap: #10-32, UNF, 2B & 3B Class of Fit, 1.5P, High Speed Steel, TiN Finish 7/8″ Thread Length, 2-3/8″ OAL, H3, Series 776
• Precision Compression Spring: 0.5900" OD, 2-1/8" Free Length
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T6; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 2.36220; Package Quantity: 1
• Thread Forming Tap: #10-32, UNF, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 7/8″ Thread Length, 2-3/8″ OAL, H5, Series 776
• Thread Forming Tap: #12-24, UNC, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 15/16″ Thread Length, 2-3/8″ OAL, H5, Series 776
• Rigid & Swivel Caster Wheel: Polyurethane, 5" Dia, 1-1/4" Wide
• Hex Head Cap Screw
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3031; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Plastic Sheet: High Density Polyethylene, 1/16″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Strip: Buna-N Rubber, 1/4″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0353; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Scrub & Scouring Brushes
• Plastic Rod: 60" Long, 4" Dia, Natural Color, Opaque, 5000 - 1000 psi Tensile Strength
• Depressed Center Wheel: Type 27, 6″ Dia, 1/8″ Thick, Ceramic 15,300 Max RPM, Use with Cutter & Grinder
• Panel Rivets; Type: Panel Rivet; Shank Type: Standard; Minimum Hole Diameter: 0.312 in; Head Type: Crowned; Maximum Hole Diameter: 0.312 in; Minimum Hole Diameter (Decimal Inch): 0.3120; Maximum Hole Diameter (Decimal Inch): 0.3120; Overall Length: 0.998
• Pen: Ultra Fine Tip, Black Ink
• Label Maker Label: Yellow, Polyolefin, 350 per Roll
• Tank Flanges; Type: Tank Flange; Weld Spud; Flange Diameter: 1.61; Flange Thickness (Inch): .51; Pipe Thread Size: 3/8; Top Diameter: .91; Material: 304 Stainless; Material: 304 Stainless
• Precision Compression Spring: 0.7050" OD, 2-7/8" Free Length
• Threaded Ball Plunger: M6 x 1, 0.138″ Ball Dia, 0.551″ Body Length, 0.039″ Max Ball Reach 2 lb Initial End Force, 2.92 lb Final End Force, Steel Body, Nylon Ball, Locking Element
• 5/8-11 10″ OAL Unequal Double Threaded Stud Carbon Steel, 2-1/2″ Long Thread Length, 7/8″ Short Thread Length
• Work & General Purpose Gloves; Application: Cold; Men's Size: 7; Lining Material: Thinsulate; Back Material: Cowhide; Cuff Style: Slip-On; Finger Coverage: Full Fingered; Leather Type: Cowhide; Static Dissipative: No; Leather Grade: Industrial; Lint-Free:
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Plastic Sheet: Acrylonitrile Butadiene Styrene, 1/16″ Thick, Beige, 6,000 psi Tensile Strength Rockwell R-105
• Slotting & Profile Milling Tip Insert: XSE550E10100D1R100Z3 SIRA, Solid Carbide
• Black Square Plug: 2″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Laundry Detergent; Form: Liquid; Container Size (oz.): 41; Scent: Crisp Linen; Description: Bottle
• Taper Length Drill Bit: 0.1614″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Taper Length Drill Bit: 0.1535″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Slotted Drive #10-32 UNF 29/32″ Length Under Head Captive Screw 18-8 Stainless Steel, 3/8″ Head Diam, 3/16″ Head Height, Uncoated
• Taper Length Drill Bit: 0.1495″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Cylindrical Shank, Series 219
• Power & Impact Screwdriver Bits & Holders; Bit Type: Torx; Power Bit; Hex Size (Inch): 1/4 in; Blade Width (mm): 3.30; Blade Thickness (mm): 3.3000; Drive Size: 1/4 in; Body Diameter (mm): 3.300; Torx Size: T15; Overall Length (Decimal Inch): 1.0000; Numb
• Power & Impact Screwdriver Bits & Holders; Bit Type: Torx Plus; Power Bit; Hex Size (Inch): 1/4 in; Blade Width (Decimal Inch): 0.2400; Blade Thickness (Decimal Inch): 0.2400; Drive Size: 1/4 in; Body Diameter (Inch): 1/4 in; Torx Size: IP7; Overall Lengt
• Threaded Ball Plunger: 5-40, 0.062″ Ball Dia, 1/4″ Body Length, 0.02″ Max Ball Reach 0.25 lb Initial End Force, 0.75 lb Final End Force, Stainless Steel Body, Nylon Ball, Locking Element
• 3/4-10 3″ OAL Equal Double Threaded Stud Stainless Steel, 1-1/4″ Equal Thread Length
• 5/8-11 5″ OAL Equal Double Threaded Stud Stainless Steel, 1-3/4″ Equal Thread Length
• Washroom Shelves, Soap Dishes & Towel Holders; Material: Plastic; Shelf Length: 2.47 in; Shelf Width: 5 in; Shelf Depth: 1.63 in; Material: Plastic; Depth (Inch): 1.63 in
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: White; Material: Polyethylene; Size: 8-1/2x11; Minimum Order Quantity: Polyethylene; Material: Polyethylene
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1/2″; Color: Blue; Material: Polyethylene; Size: 8-1/2 X 11; Minimum Order Quantity: Polyethylene; Material: Polyethylene
• Strip: Buna-N Rubber, 1″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Turning Insert: CCMT21.51MW MC6025, Carbide
• Workbench & Workstation Accessories; Material: Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9266; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Height Adjustable Table: 60" Wide, 30" Deep, 32-1/4 to 44-1/4" High, Painted, Hardwood Top, Steel Base, Silver
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0277; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9920; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9727; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9509; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Locker Accessories; Accessory Type: Locker Accessory; For Use With: Hallowell 304 Stainless Steel Lockers, 18"W x 18"D Single or Double Tier; Material: Stainless Steel
• Locker Accessories; Accessory Type: Locker Accessory; For Use With: Hallowell 304 Stainless Steel Lockers, 12"W x 18"D Single or Double Tier; Material: Stainless Steel
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9133; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Tongue & Groove Pliers; Maximum Capacity (Inch): 1-1/4; Joint Type: Groove; Type: Pliers; Overall Length Range: 9 to 11.9 in; Side Cutter: No; Handle Type: Comfort Grip
• Flexible Coupling: Sinter Carbon Steel, 3/8″ Pipe, 0.81″ OAL
• Flexible Coupling: Sinter Carbon Steel
• Flexible Coupling: Sinter Carbon Steel
• Pullers, Extractors & Specialty Wrenches; Product Type: Valve Wheel Hook; Overall Length (Decimal Inch): 14.7638
• 4,250 Lbs. Load Limit 6 Ft. Long Pry Bar Lever Dolly
• Locker Accessories; Accessory Type: Locker Accessory; For Use With: Hallowell 304 Stainless Steel Lockers, 12"W x 18"D; Material: Stainless Steel
• 3,500 Lbs. Load Limit 5 Ft. Long Pry Bar Lever Dolly
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Satin Chrome; Minimum Door Width: 2.33 ft
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Anodized, Aluminum, Dark Bronze; Minimum Door Width: 3 ft
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Aluminum Painted; Minimum Door Width: 2.58 ft
• Turning Insert: CNMG431SY MP3025, Cermet
• Square End Mill: 2 Flute, Solid Carbide
• High Temperature Anti-Seize Lubricant: 8 oz Brush Top Copper Base, -287 to 1,800 ° F, Copper, Water-Resistant
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.6075; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• ER: ER11
• Compression Tube Connector: 1/4″ Thread, Compression x MNPT Zinc-Plated Steel
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 1-3/4″ Usable Length 3.24″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 1-3/4″ Usable Length 3.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Plastic Bar: Polycarbonate, 1/2″ Thick, Clear
• Pipe Close Nipple: 1/8″ Fitting, 316 Stainless Steel MNPT x MNPT, Threaded, ANSI/ASME B31.1, ANSI/ASME B31.3 & ANSI/ASME B1.20.1, 9,400 psi
• Plastic Bar: Acrylonitrile Butadiene Styrene, 1/2″ Thick, Beige Rockwell R-105
• #8-32, 1/2″ OAL, Aluminum Female Round Circuit Board Standoff Fully Threaded, Grade T-3, Uncoated
• 3/8″ Screw 1-1/2″ OAL 0.38″ ID x 3/4″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Satin Chrome; Minimum Door Width: 2.33 ft
• Automatic Toilet Bowl Cleaner
• Deep Groove Ball Bearing: 52 mm OD 1,547 lb Static Load
• Plastic Rod: 24" Long, 2" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Push Bars; Material: Metal; Locking Type: Exit Device Only; Maximum Door Width: 3 ft; Finish/Coating: Anodized, Aluminum, Dark Bronze; Minimum Door Width: 3 ft
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8830; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Stainless Steel Pipe Nipple: 1/2″ Pipe, Grade 304 Schedule 40
• Plastic Bar: Polycarbonate, 1/16″ Thick, Clear
• Deep Groove Ball Bearing: 37 mm OD 899 lb Static Load
• Pipe Fitting: 1/4 x 1/4″ Fitting, 316 Stainless Steel 150 psi
• Masking Tape: 3″ Wide, 33.33 yd Long, 4 mil Thick, Black Polyvinylchloride Film, 0.48 lb/in Tensile Strength
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 1″ Usable Length 2.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Indexable Square-Shoulder Face Mill: R220.940063046LO12.4A
• Flap Disc: 7/8″ Hole, 80 Grit, Zirconia Alumina, Type 27 Coated, Phenolic-Backed, 12,000 RPM
• Welding Gloves: Size X-Large, Uncoated, Work & Driver Application Brown, Uncoated Coverage, Smooth Grip
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1 1/2″; Color: White; Material: Vinyl; Size: 8-1/2 x 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1-1/2″; Color: Navy; Material: Vinyl; Size: 8-1/2 X 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Ball End Mill: 0.60 mm Dia, 0.45 mm LOC, 2 Flute, Solid Carbide
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1-1/2″; Color: Black; Material: Vinyl; Size: 8-1/2 X 11; Minimum Order Quantity: Vinyl; Material: Vinyl
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1023; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards,
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #000; Inner Diameter (Decimal Inch): 0.0495; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Boring Insert: WCMT06T304E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 80 ° Trigon, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Boring Insert: WCMT06T308E47 WSM20S, Solid Carbide TiAlN, Al2O3 & Al Finish, 80 ° Trigon, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Indexable Drill Insert: 01 BK7935, Carbide AlTiN Finish, 1/4″ Inscribed Circle, Trigon
• 1/2″ Pin Diam, 3-1/2″ Pin Length, 1/4-20 Thread, Spiral Groove Dowel Pin Alloy Steel, -0.0001 to 0.0001″ Diam Tolerance, 1 Beveled & 1 Threaded End
• Locker Accessories; Accessory Type: Locker Accessory; For Use With: Hallowell 304 Stainless Steel Lockers, 18"W x 18"D; Material: Stainless Steel
• American-Pattern File: 6 ″ Length, Double Extra Slim Taper, Double 1-1/2″ Wide, 0.75″ Thick, Tang
• Indexable Drill Insert: M30 CTPP430, Carbide TiAlN Finish, Square
• Plastic Rod: 24" Long, 1.25" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Indexable Drill Insert: M30 CTCP420, Carbide TiCN & Al2O3 Finish, Square
• Cut-Resistant Gloves: Size S, ANSI Cut A3, Nitrile, HPPE Gray, 9.84″ OAL, Palm & Fingers Coated, HPPE Lined, Kevlar, Steel, Nylon & Spandex Back, Nitrile Dipped Grip
• Locker Accessories; Accessory Type: Locker Accessory; For Use With: Hallowell 304 Stainless Steel Lockers, 18"D with Slope Tops; Material: Stainless Steel
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 5″ Usable Length 6.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• All-Purpose Cleaner: 1 gal Bottle, Disinfectant Liquid, Lemon Scent
• Traffic Barricades; Type: Type I & II; Barricade Height (Inch): 8; Material: Plastic; Barricade Width (Inch): 24; Reflective: No; Compliance: None; Color: White; Height (Inch): 8
• Arc Welding Accessories; For Use With: Electrodes
• 1/2 x 6″ 6063 Aluminum Pipe Nipple Threaded, Schedule 40
• Stainless Steel Pipe Nipple: 3/4″ Pipe, Grade 316 Schedule 80
• Lever Locksets; Lockset Type: Entrance; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4; Finish: Satin Brass
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 3/8; Fitting Shape: Tee; Maximum Working Pressure (Psi
• Metal Push-To-Connect Tube Fittings; Fitting Type: EL SWV; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 1/2; Fitting Shape: 90 ™ Elbow; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• Micro Drill Bit: 0.0197″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0157″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Push-To-Connect Tube Fitting: Male Straight Polybutylene, 350 psi
• Micro Drill Bit: 0.0146″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0114″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Compression Tube:
• Micro Drill Bit: 0.011″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0154″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Deep Groove Ball Bearing: 35 mm OD Bearing Number 6003
• Micro Drill Bit: 0.0106″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0102″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.015″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6120
• Micro Drill Bit: 0.0232″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0185″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0189″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0193″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100
• Micro Drill Bit: 0.0591″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6140
• Micro Drill Bit: 0.0224″ Dia, 120 °, Solid Carbide Bright/Uncoated, RH Cut, Helical Flute, Series 6100