Products

• FlexC 80 Quick-Change Collet 2-33/64" Round Serrated
• Corner Radius End Mill: 1/2" Dia, 1-1/4" LOC, 0.0150" Radius, 7 Flute, Solid Carbide
• Black Reducing Coupling: 3/4 x 1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Mini Push Type Clear Tube Grease Gun - 3Oz. (85gms)
• Ball Grip Quick-Release Pin: Ring Handle, 3/4″ Pin Dia, 1-1/4″ Usable Length 3.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 1.0093; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Modular Reamer Wrench For Use with Modular Reamers
• Corner Radius End Mill: 25 mm Dia, 45.00 mm LOC, 4.00 mm Radius, 8 Flute, Solid Carbide
• Ball Grip Quick-Release Pin: Ring Handle, 7/16″ Pin Dia, 2-1/2″ Usable Length 4.08″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Spot Welder Tips; Tip Type: Straight Tip E Nose (Truncated); Material: RWMA Class 1 - C15000; Type: Straight Tip E Nose (Truncated)
• 1/8″ Diam 1-5/8″ Flute Length 135° Cobalt Aircraft Extension Drill Straw Finish, Straight-Cylindrical Shank, Split Point, Self-Centering, Series CO500-12
• Lawn Sprinklers; Type: Sprinkler with On/Off Switch; Thread Size: 3/4; Base Style: Spike; Travelling Sprinkler: No; Spray Pattern: Circular; Description: Impact
• Plastic Bar: Acetal, 1/32″ Thick, Black Rockwell M-90
• Corner Radius End Mill: 1/2" Dia, 1" LOC, 0.0300" Radius, 7 Flute, Solid Carbide
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Taper Length Drill Bit: 0.0827″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Taper Length Drill Bit: 0.0906″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Taper Length Drill Bit: 0.0866″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Plastic Sheet: Acetal, 1/4″ Thick, 6″ Long, White, 8,500 psi Tensile Strength Rockwell M-90
• M24x3.0 200mm OAL Equal Double Threaded Stud Alloy Steel, 63mm Equal Thread Length, Metric
• 1 Quart Vinyl Acetate Concrete Repair and Resurfacing Gray
• Deep Groove Ball Bearing: 40 mm OD 877 lb Static Load
• #10 Stud, 16 to 14 AWG Compatible, Partially Insulated, Crimp Connection, Locking Fork Terminal Nylon Insulation, Blue, 600 Volts, Copper Contacts
• Sirens & Alarms; Product Type: Siren; Minimum Noise Level: 106; Maximum Noise Level: 106; Minimum Adjustable Output: 106; Maximum Adjustable Output: 106; Voltage: 230.00; Amperage: 0.0400
• Tire Accessories; Type: Emergency Chains; For Tire Size: 17.5″; 19.5''; 16.5-17.5''; For Use With: Light Trucks; Container Size: Kit; Additional Information: Fits 16.5″ to 19″ Rims; For Use With: Light Trucks
• Flexible Coupling: Aluminum hubs with Stainless Steel Discs, 3/8" Pipe, 1.81" OAL
• Soap, Lotion & Hand Sanitizer Dispensers; Mount Type: Wall; Dispenser Material: Plastic; Form Dispensed: Liquid; Capacity: 1250 ml; Overall Height (Decimal Inch): 5.1000; Color: Gray; For Use With: Boardwalk 1250 ml Refills
• Press Fit Headless Drill Bushing: H & P, 3/8″ ID, 3/4″ OD 1-1/4″ OAL, Steel
• Plastic Sheet: Polyvinylchloride, 1/4″ Thick, Gray Rockwell R-110
• Corner Radius End Mill: 1/2" Dia, 1-1/4" LOC, 0.0300" Radius, 7 Flute, Solid Carbide
• Boring Insert: SCMT09T308E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 90 ° Square, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Taper Length Drill Bit: 0.1495″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Boring Insert: SCMT09T304E47 WSM20S, Solid Carbide TiAlN, Al2O3 & Al Finish, 90 ° Square, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Boring Insert: SCMT09T304E47 WSM10S, Solid Carbide TiAlN, Al2O3 & Al Finish, 90 ° Square, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Boring Insert: SCMT09T304E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 90 ° Square, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Extra Length Drill Bit: 0.1575″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Boring Insert: SCMT09T308E47 WSM10S, Solid Carbide TiAlN, Al2O3 & Al Finish, 90 ° Square, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Taper Length Drill Bit: 0.1457″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Helical Flute Thread Mill: M8, 2 Flute, 4.00 mm Shank Dia, Solid Carbide
• Boring Insert: SCMT09T308E47 WSM20S, Solid Carbide TiAlN, Al2O3 & Al Finish, 90 ° Square, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Self-Retracting Lifeline: 420 lb Capacity, 8.00' Lifeline, None
• Boring Insert: CCMT09T308E47 WSM30S, Solid Carbide TiAlN, Al2O3 & Al Finish, 80 ° Diamond, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Extra Length Drill Bit: 0.1299″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Helical Flute Thread Mill: M6, 2 Flute, 4.00 mm Shank Dia, Solid Carbide
• Boring Insert: CCMT09T308E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 80 ° Diamond, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Boring Insert: CCMT09T304E47 WSM30S, Solid Carbide TiAlN, Al2O3 & Al Finish, 80 ° Diamond, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Wrenches For Indexables; Wrench Type: Insert Wrench; Indexable Tool Type: Toolholder; Drive Type: Torx Plus; Hardware Compatibility: Milling Holder; Overall Length: 1.97; Tool Material: Steel; Torx Size: T05P; Series: T05P
• Boring Insert: CCMT09T302E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 80 ° Diamond, 0.008″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Boring Insert: SCMT09T308E47 WSM30S, Solid Carbide TiAlN, Al2O3 & Al Finish, 90 ° Square, 0.031″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Lever Locksets; Lockset Type: Classroom; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4; Finish: Satin Chrome
• Boring Insert: CCMT09T304E47 WPP20S, Solid Carbide TiCN, Al2O3 & TiCN Finish, 80 ° Diamond, 0.016″ Corner Radius, 0.375″ Inscribed Circle, 0.156″ Thick, 7 ° Relief
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 3″ Usable Length 4.49″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Ball End Mill: 2.00 mm Dia, 1.60 mm LOC, 3 Flute, Solid Carbide
• Ball Grip Quick-Release Pin: Ring Handle, 5/16″ Pin Dia, 1″ Usable Length 2.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Ring Binders; Binder Type: 3 Hole Binder; Capacity: 1; Color: Blue; Material: vinyl; Size: 8-1/2 X 11; Minimum Order Quantity: vinyl; Material: vinyl
• Scrub & Scouring Brushes; Type: Scrub Brush; Bristle Material: Polypropylene; Overall Length (Decimal Inch): 7.00000; Overall Length (Inch): 7; Block/Handle Material: Plastic; Color: Yellow; Flagged: No; Application: Foodservice; Food Processing; Handle S
• Hard Hat: Impact Resistant, Short Brim, Class C, 4-Point Suspension Black, HDPE, Vented
• Compression Tube 90 deg Elbow: M36x2, 25" Tube ID, 25 mm Tube OD, Tube OD
• Workbench & Workstation Accessories; Material: Steel
• Hard Hat: Impact Resistant, Short Brim, Class E, 4-Point Suspension Gray, HDPE
• Compression Tube Straight: M18x1.5, 10" Tube ID, 10 mm Tube OD, Tube OD
• Hard Hat: Impact Resistant, Short Brim, Class C, 4-Point Suspension Red, HDPE, Vented
• Flashlights; Bulb Type: LED; Type: Flashlight; Maximum Light Output (Lumens): 100; Body Type: Plastic; Battery Size: AA; Body Color: Yellow; Rechargeable: No; Complete Light Output (Lumens): 100 (High)
• Hard Hat: Impact Resistant, Short Brim, Class E, 4-Point Suspension Blue, HDPE
• Hard Hat: Impact Resistant, Short Brim, Class E, 4-Point Suspension Red, HDPE
• Hard Hat: Impact Resistant, Short Brim, Class C, 4-Point Suspension Gray, HDPE, Vented
• Hard Hat: Impact Resistant, Short Brim, Class C, 4-Point Suspension Orange, HDPE, Vented
• Flap Disc: 7/8″ Hole, 80 Grit, Zirconia Alumina, Type 27 Coated, Fiber-Backed, 13,300 RPM
• Shim for Indexables: 1/2″ Inscribed Circle 1/4″ Thick, IRSN Shim, Negative
• Metal Push-To-Connect Tube Fittings; Fitting Type: TEE BRCH; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 1/4″; Tube Outside Diameter: 3/8; Fitting Shape: Tee; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards: DOT;
• Metal Push-To-Connect Tube Fittings; Fitting Type: CONN; Connection Type: Push-to-Connect x MNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 5/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Overall Length
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9811; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Taper Length Drill Bit: 0.0433″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Extra Length Drill Bit: 0.063″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Compartment Storage Boxes & Bins; Type: Caddy; Number of Compartments: 1.000; Color: Clear; Material: Plastic; Size: Large; Material: Plastic
• Taper Length Drill Bit: 0.0730″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Taper Length Drill Bit: 0.0700″ Dia Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• 1-8 6-1/2″ OAL Equal Double Threaded Stud Carbon Steel, 2-1/2″ Equal Thread Length
• 3/4-10 12″ OAL Unequal Double Threaded Stud Carbon Steel, 3″ Long Thread Length, 1″ Short Thread Length
• Plastic Rod: 48" Long, 1.6250" Dia, Black, Opaque, 5000 - 1000 psi Tensile Strength
• Abrasive Belt: 3-1/2″ Width, 60 Grit, Ceramic Oxide Coated
• Maintenance Drill Bits
• Engraving Cutters; Cutter Diameter (Decimal Inch): 0.1250; Point Shape: Tip Radius; Shank Diameter (Decimal Inch): 0.1250; Shank Diameter (Inch): 1/8; Length of Cut (Inch): 3/32
• Metal Push-To-Connect Tube Fittings; Fitting Type: BULKHEAD; Connection Type: Push-to-Connect x FNPT; Material: Brass; Thread Size: 3/8″; Tube Outside Diameter: 3/8; Fitting Shape: Straight; Maximum Working Pressure (Psi - 3 Decimals): 250.000; Standards:
• Ice & Snow Melter & De-Icer: Granular, 50 lb Bag -27 ° F
• Boring Insert: CDCH07 TL120, Solid Carbide TiAlN Finish, 0.007″ Corner Radius, 0.156″ Inscribed Circle, 0.04″ Thick, 15 ° Relief
• Plastic Rod: 72" Long, 1.75" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Wall Plates; Wall Plate Type: Outlet Wall Plates; Wall Plate Configuration: Single Outlet; Shape: Rectangle; Wall Plate Size: Standard; Number of Gangs: 1; Overall Length (Inch): 4-9/16; Overall Width (Decimal Inch): 2-13/16; Overall Length (Decimal Inch)
• Rigid & Swivel Caster Wheel: Polyurethane, 4" Dia, 1-9/16" Wide
• Compression Tube Fastseal Seal Assembly Mandrel: Tube Ends O-Ring Face Seal & Flat-Face Steel
• Ball Grip Quick-Release Pin: Ring Handle, 1/2″ Pin Dia, 2-1/2″ Usable Length 4.08″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Pipe 90 ° Street Elbow: 1/2″ Fitting, 316 Stainless Steel FNPT x MNPT, 150 psi
• Timing Belt Pulleys; Pulley Type: Hub w/No Flanges; Number of Teeth: 24; Outside Diameter (Decimal Inch): 1.4590; Belt Width: 15.0 cm; 15.0 mm; 15.0 in; Material: Aluminum; Pitch Diameter: 1.504 mm; 1.504 in; Face Width: 0.781 mm; 0.781 in; Minimum Order
• 1/2 x 6″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 60, Plain Backing
• Cleaner: 32 gal Spray Bottle Liquid, Unscented
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 45.0000; Outside Diameter: 57.0000; Wall Thickness (mm): 6.00; Material: PVC; Standard Coil Length (Feet): 1; Maximum Working Pressure (psi): 70; Hardness: 70A; Special Item Information: Steel Wire R
• Precision Compression Spring: 0.7600" OD, 1-5/8" Free Length
• Label Maker Label: White, Polypropylene, 1-1/2" OAW, 1,500 per Roll
• Hydraulic Hose Fittings & Couplings; Type: V-Series Unvalved Male Plug; Fitting Type: Male Plug; Hose Inside Diameter (Decimal Inch): 1.0000; Hose Size: 1
• Top Plate Casters; Mount Type: Plate; Number of Wheels: 1.000; Wheel Diameter (Inch): 6; Wheel Material: Rubber; Wheel Width (Inch): 2; Wheel Color: Gray
• Ball Grip Quick-Release Pin: Ring Handle, 5/16″ Pin Dia, 2″ Usable Length 3.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Ball Grip Quick-Release Pin: Ring Handle, 1/4″ Pin Dia, 4″ Usable Length 5.49″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Masking Tape: 2″ Wide, 60 yd Long, 5 mil Thick, Tan Crepe Paper, Rubber Adhesive, 20 lb/in Tensile Strength
• Plastic Rod: 60" Long, 1.75" Dia, Natural Color, Opaque, 5000 psi Tensile Strength
• Plastic Rod: 24" Long, 2.5" Dia, Natural Color, Opaque, 5000 - 1000 psi Tensile Strength
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9449; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• MIG Welder Wire Liner: 0.183 to 0.31″ Wire Dia, 7.09″ Long
• Masking Tape: 1/2″ Wide, 83.33 yd Long, 4 mil Thick, Yellow Polyvinylchloride Film, 0.48 lb/in Tensile Strength
• Knee Pads; Strap Type: Hook & Loop; Closure Type: Hook & Loop; Hard Protective Cap: No; Size: One Size Fits All; Padding Material: Foam; Color: Black; Special Features: Tricot Lining; Number of Straps: 1; Fits Knee Size (Inch): One Size Fits All; Strap Ma
• Pipe Fitting: 1/2 x 3/8″ Fitting, 304 Stainless Steel 150 psi
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9103; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Rust Removers & Corrosion Inhibitors
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0229; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9587; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Threaded Spring Plunger: #6-32, 3/8″ Thread Length, 0.046″ Dia, 0.062″ Projection 1 lb Initial End Force, 1.6 lb Final End Force, Steel Body, Locking Element
• Ball Grip Quick-Release Pin: Ring Handle, 3/8″ Pin Dia, 3/4″ Usable Length 2.24″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• #6 Screw 1-1/8″ OAL 0.14″ ID x 1/4″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Push-To-Connect Tube Fitting: Female Straight, 3/8″ OD Polybutylene, 350 psi
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 3/4-10; 3/4-10 in; Overall Length (Inch): 3-1/2; Material: Alloy Steel; Finish/Coating: Black Oxide; Class: 2A; Grade: 8; Thread Direction: Right; Flat: No; Material Specific
• 8″ Long, Stainless Steel Cable Loop & Tab with Hole End, Quick Release Pin Lanyard 1/16″ Cable Diam, 13/64″ Hole Diam, Nylon Cable
• Ball End Mill: 3/8" Dia, 3/4" LOC, 2 Flute, Solid Carbide
• Rain & Chemical Resistant Jacket: 2X-Large, Blue, 46-49" Chest, Nomex
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00001/-0.00001; Blank Number Wire Size: #3; Inner Diameter (Decimal Inch): 0.7436; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standard
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Antique Brass; Compatible Door Thickness: 1-3/8" to 2-1/4"; Backset: 2.75; Lockset Grade: Grade 1
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3649; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Lever Locksets; Lockset Type: Exit; Key Type: Keyed Different; Back Set: 2-3/4; Cylinder Type: Less Core; Material: Metal; Door Thickness: 1-3/4 to 2-1/4; Finish: Satin Chrome
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8549; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Label Maker Label: White, Polyimide, 10,000 per Roll
• Hydraulic Filter Element: 2 µ
• 2″ Screw High-Temperature Flat Washer: Grade A286 Stainless Steel, Plain Finish 3/32″ ID, 1/4″ OD, 0.02″ Thick
• Ball End Mill: 4.00 mm Dia, 3.20 mm LOC, 2 Flute, Solid Carbide
• Free-Running Insert: M22x2.5, 33.00 mm OAL
• Black 45 ° Street Elbow: 1/2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Sheet: Neoprene Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Plain Backing
• Black Tee: 1/8″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Power & Impact Screwdriver Bits & Holders; Bit Type: Torx Plus; Power Bit; Hex Size (Inch): 1/4 in; Blade Width (Decimal Inch): 0.2400; Blade Thickness (Decimal Inch): 0.2400; Drive Size: 1/4 in; Body Diameter (Inch): 1/4 in; Overall Length (Decimal Inch)
• Brass Pipe Coupling: 1/4″ Fitting, FNPT x FNPT, Class 125, Lead Free 125 psi, Brass
• Paper Fasteners; Type: Prong Fastener; Length (Inch): 2-3/4; Box Quantity: 100
• Lubrication Filtration System Accessories; Type: DEF Accessory; Compatible System: Portable Cart High-Viscosity Oil Filtration System
• Lubrication Filtration System Accessories; Type: DEF Accessory; Compatible System: Portable Cart High-Viscosity Oil Filtration System
• Lubrication Filtration System Accessories; Type: DEF Accessory; Compatible System: Portable Cart High-Viscosity Oil Filtration System
• All-Purpose Cleaner: 22 gal Trigger Spray Bottle, Disinfectant Liquid, Citrus Scent
• Traffic Flags & Wind Socks; Type: Barricade Flag With Stiffener; Flag Height (Inch): 20; Overall Height (Inch): 20; Color: Orange; Material: Wood Dowel; Vinyl Flag; Flag Width (Inch): 20; Dowel Handle Diameter (Inch): 3/4; Includes: 36 in L Dowel; For Use
• Plastic Bar: Polypropylene, 1/8″ Thick, Semi-Clear White
• Plastic Bar: Polypropylene, 1/8″ Thick, Semi-Clear White
• Plastic Sheet: Polyvinylchloride, 1/4″ Thick, Gray Rockwell R-110
• Cut, Puncture & Abrasive-Resistant Gloves: Size M, ANSI Cut A4, ANSI Puncture 2, Nitrile, Synthetic Black & Blue, Palm & Fingers Coated, Nitrile Dipped Grip, ANSI Abrasion 5
• Cut, Puncture & Abrasive-Resistant Gloves: Size S, ANSI Cut A4, ANSI Puncture 2, Nitrile, Synthetic Black & Blue, Palm & Fingers Coated, Nitrile Dipped Grip, ANSI Abrasion 5
• Push-to-Connect Tube Fitting: 3/4″ OD Lead Free Brass, 200 psi
• Plastic Bar: Acetal, 1/2″ Thick, Black Rockwell M-90
• All-Purpose Cleaner: 36 gal Bottle Liquid, Bleach Scent
• #10 Screw 1-3/4″ OAL 0.192″ ID x 5/8″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• TIG Torch Parts & Accessories; Type: Handle; Length (Inch): 6; For Use With: 26; For Use With: 26; PSC Code: 3438; For Use With: 26; Type: Handle
• Silicone Tube: 7/32″ OD, 10' Length 40 Max psi, Clear
• Ball Grip Quick-Release Pin: Ring Handle, 5/16″ Pin Dia, 1-3/4″ Usable Length 3.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• 19mm Bore Diam, Stainless Steel Metric Internal Snap Retaining Ring 20.5mm Free OD, 1.1mm Groove Width x 0.5mm Groove Depth, 1mm Ring Thickness
• Cut-Off Inserts
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: SpeedLoc; Outside Diameter (Decimal Inch): 1.0018 in; Inside Diameter (mm): 16 mm; Plate Thickness Tolerance: ™0.0050 in; Plate Thickness Compatibility: 0.5 in; Plate Thickness Toleranc
• Knob Locksets; Type: Storeroom; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Stainless Steel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.375; Lockset Grade: Grade 2
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9045; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Knob Locksets; Type: Passage; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T25; Blade Length (mm): 150.0000; Overall Length (mm): 177.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T25; Handle Type: T-Handle; Additional
• Torx Keys; End Type: Torx; Handle Type: T-Handle; Torx Size: T27; Blade Length (mm): 150.0000; Overall Length (mm): 177.0000; Minimum Order Quantity: Chrome-Vanadium Steel; Material: Chrome-Vanadium Steel; Torx Size: T27; Handle Type: T-Handle; Additional
• 0.901″ Bore Diam, Spring Steel Internal Snap Retaining Ring 0.901″ Free OD, 0.046″ Groove Width x 0.029″ Groove Depth, 0.042″ Ring Thickness
• Plastic Bar: Polypropylene, 1/4″ Thick, Semi-Clear White
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Plastic Bar: Acetal, 1/16″ Thick, Black Rockwell M-90
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9006; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Plastic Bar: Acetal, 1/32″ Thick, White
• Soap: 1 gal Bottle Liquid, Pink, Floral-Lavender Scent
• Tank Flanges; Overall Height (Inch): 5/8
• Tank Flanges; Overall Height (Inch): 3/4
• B-9 Chem Dip Long Handle Basket for 1905:
• Pipe Hex Plug: 1/4″ Fitting, 316 Stainless Steel MNPT with Thread Sealant, 150 psi
• Cut-Resistant Gloves: Size 3XL, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size S, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size XS, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size 2XL, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size XL, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size L, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Cut-Resistant Gloves: Size M, ANSI Cut A4, Nitrile, Micro Foam Black & Green, Palm & Fingers Coated
• Knob Locksets; Type: Office; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8" to 1-7/8"; Backset: 2.375; Lockset Grade: Grade 2
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1923; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards
• Radial Bristle Brush
• 3/8″ Shaft Diam, 0.335″ Groove Diam, Spring Steel External C Style Retaining Ring 0.448″ Free OD, 0.328″ Free ID, 0.029″ Groove Width x 0.02″ Groove Depth, 0.025″ Ring Thickness, Grade 1060-1090
• Plastic Bar: Polyvinylchloride, 1/2″ Thick, Dark Gray
• Plastic Bar: Polyvinylchloride, 1/2″ Thick, Dark Gray
• Piece (PIECE) 4
• Hex Head Cap Screw: 1/2-20 x 2-1/2″, Grade 5 Steel, Zinc-Plated Partially Threaded, ASME B18.2.1
• 22 oz Unscented Scent, Use on Carpet & Upholstery Cleaner
• Tank Flanges; Overall Height (Inch): 9/16
• MIG Welder Wire Liner: 0.131 to 0.31″ Wire Dia, 7.62' Long
• Turning Insert: TCMT32.52MW4 WSM20S, Carbide
• Ball End Mill: 1.00 mm Dia, 1.00 mm LOC, 2 Flute, Solid Carbide
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9534; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Deadbolts; Deadbolt Type: Deadlock; Lock Type: Single Cylinder; Key Type: Keyed Different; Mount Type: Mortise; Material: Steel; Minimum Door Thickness: 1.75 in; Maximum Door Thickness: 2.25; Finish: Bright Chrome
• Disc Backing Pad: 7" Dia, Disc Backing Pad
• Precision Compression Spring: 0.5880" OD, 2-5/8" Free Length
• #2 Screw 7/16″ OAL 0.09″ ID x 1/4″ OD Round Brass Circuit Board Spacers Zinc-Clear Coated, Grade 360, Female Unthreaded
• Plastic Sheet: High Density Polyethylene, 1/16″ Thick, 16″ Long, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Black Hex Bushing: 1 x 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 6.0000; Outside Diameter: 11.0000; Wall Thickness (mm): 2.50; Material: Silicone; Standard Coil Length (Feet): 1; Maximum Working Pressure (psi): 145; Hardness: 70A; Special Item Information: Polyest
• Painter's Tape & Masking Tape: 1/2″ Wide, 60 yd Long, 5.4 mil Thick, Blue Crepe Paper, Acrylic Adhesive, 27 lb/in Tensile Strength
• Black Tee: 3/8 x 3/8 x 1/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Label Maker Label: White, Polypropylene, 1-1/2" OAW, 3,000 per Roll
• Black Reducing Coupling: 1-1/4 x 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• PVC Tube: 1/8″ ID, 1/4″ OD, 50' Long 20 Max psi, Clear
• High Temperature Masking Tape: 1″ Wide, 60 yd Long, 6.3 mil Thick, Yellow Crepe Paper, Rubber Adhesive, 22 lb/in Tensile Strength
• Label Maker Label: White, Polyester, 3,000 per Roll
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T15; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 3.14960; Package Quantity: 1
• Precision Compression Spring: 0.7600" OD, 1-5/8" Free Length
• Woodruff Keyseat Cutter: 3/8" Cut Dia, 3/16" Cut Width, 3/8" Shank Dia, Straight Tooth
• Cut & Puncture-Resistant Gloves: Size 2XS, ANSI Cut A2, ANSI Puncture 3, Micro-Foam Nitrile, HPPE, Nylon & Glass Green & Black, Palm & Fingertips Coated, Foam Grip
• Threaded Studs; Style: Fully Threaded; System of Measurement: Inch; Thread Size: 5/8-18; 5/8-18 in; Overall Length (Inch): 6; Overall Length (Decimal Inch): 6 in; Overall Length (mm): 6 in; Material: Alloy Steel; Finish/Coating: Plain; Class: 2A; Grade: 8
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Plastic Bar: Polyvinylchloride, 3/8″ Thick, Dark Gray
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 50, Plain Backing
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Turning Insert: RCMT1204M0HU6 WPP20G, Carbide
• Sheet: Silicone Rubber, 6″ Wide, 12″ Long, Red Durometer 40, Plain Backing
• Woodruff Keyseat Cutter: 3/32" Cut Dia, 1/8" Shank Dia, Straight Tooth
• Plastic Sheet: Garolite, 1/32″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Plasma Cutter Cutting Tips, Electrodes, Shield Cups, Nozzles & Accessories; Accessory Type: Gouge Tip; Type: Gouge Tip; Amperage: 40; For Use With: TD Cutmaster 40 with SL40; SL60 Torch
• Solid Top Dolly: Hardwood Top
• Plasma Cutter Cutting Tips, Electrodes, Shield Cups, Nozzles & Accessories; Accessory Type: Gouge Tip; Type: Gouge Tip; Amperage: 100; 60; For Use With: 58; TD Cutmaster 60i; 102 with SL60; SL100 Torch; 85
• Corner Radius End Mill: 1/2" Dia, 1-5/8" LOC, 0.0900" Radius, 7 Flute, Solid Carbide
• Ball End Mill: 3.00 mm Dia, 5.00 mm LOC, 2 Flute, Solid Carbide
• Pipe Fitting: 3/4 x 1/4″ Fitting, 304 Stainless Steel 150 psi
• Ball End Mill: 3.00 mm Dia, 5.00 mm LOC, 2 Flute, Solid Carbide
• Precision & Specialty Screwdrivers; Tool Type: Precision Slotted Screwdriver; Blade Length (mm): 2; Shaft Length: 60 mm; Handle Length: 160 mm; Handle Color: Black; Green; Finish: Chrome-Plated; Body Material: Chrome Alloy Steel; Overall Length (Inch): 6.
• All-Purpose Cleaner: 23 gal Trigger Spray Bottle Liquid, Morning Meadow Scent
• All-Purpose Cleaner: 23 gal Trigger Spray Bottle Liquid, Free & Clear Scent
• Natural Glass & Surface Cleaner
• Knob Locksets; Type: Entrance; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Nickel; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• Ball Grip Quick-Release Pin: Ring Handle, 3/16″ Pin Dia, 3/4″ Usable Length 2.24″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Black 45 ° Elbow: 3/8″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Class XX Plus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.4669; Calibrated: No; Traceability Certification Included: No; Go/No Go: Go; Standards: B47.1 Gage
• M3 Screw 14mm OAL 3.2mm ID x 4.5mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Plastic Sheet: Polyvinylchloride, 1/16″ Thick, 16″ Long, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• M2.5 Screw 16mm OAL 2.7mm ID x 4.5mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• M2.5 Screw 14mm OAL 2.7mm ID x 4.5mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Plastic Rod: Garolite (CE), 1' Long, 7/16″ Dia, Brown Rockwell M-100
• Sheet: EPDM Rubber, 6″ Wide, 6″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Spot Welder Tips; Tip Type: Straight Shank for 5RW Female Cap; Material: RWMA Class 2 - C18200; Type: Straight Shank for 5RW Female Cap
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9581; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Pipe Coupling: 3/4″ Fitting, 304 Stainless Steel FNPT x FNPT, Threaded, ASME B1.20.1 & ASTM A351, 150 psi