Products

• Grooving Tool: Internal Solid Carbide
• Plastic Bar: Polyvinylchloride, 1/2″ Thick, Dark Gray
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 0.0669″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Work Boot: Size 12, 9-3/4" High, Leather, Fiberglass & Safety Toe, Construction Boot
• Die Drill Bit: 0.0630″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Taper Length Drill Bit: 0.2835″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 3/32″ Dia, 135 °, Solid Carbide Uncoated, 1/2″ Flute, 1-1/2″ OAL, Series 200
• Taper Length Drill Bit: 0.2913″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Grooving Tool: Internal Solid Carbide
• Taper Length Drill Bit: TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 5537
• Die Drill Bit: 5/64″ Dia, 135 °, Solid Carbide Uncoated, 3/8″ Flute, 1-1/2″ OAL, Series 200
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 1/16″ Dia, 135 °, Solid Carbide Uncoated, 5/16″ Flute, 1-1/2″ OAL, Series 200
• Oil Drain Accessories; Type: Drum Funnel Cover; Drain Pan; Material: Plastic; Overall Length: 16.00; Overall Width: 16; Material: Plastic; Minimum Order Quantity: Plastic; Accessory Type: Drum Funnel Cover; Drain Pan; Material: Plastic
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 3/64″ Dia, 135 °, Solid Carbide Uncoated, 1/4″ Flute, 1-1/2″ OAL, Series 200
• Pipe Tee: 1″ Fitting, 316 Stainless Steel MNPT x FNPT x FNPT, 150 psi
• Grooving Tool: Internal Solid Carbide
• Grooving Tool: Internal Solid Carbide
• Indexable Drill Insert: XCMT060204TC TT9030, Carbide Coated, 83.5 ° Diamond
• Miniature Ball Bearing: 4 mm Bore Dia, 9 mm OD, 4 mm OAW
• Sheet: Neoprene Rubber, 12″ Wide, 24″ Long, Black Durometer 65 to 75
• Grooving Tool: Internal Solid Carbide
• Plastic Sheet: High Density Polyethylene, 3/4″ Thick, Black Shore D-60
• Indexable Drill Insert: XCMT040104TC TT8020, Carbide Coated, 83.5 ° Diamond
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8701; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• #10 Stud, 12 to 10 AWG Compatible, Partially Insulated, Crimp Connection, Standard Fork Terminal Nylon Insulation, Red, 600 Volts, Copper Contacts
• Indexable Drill Insert: XCMT080304TC TT9030, Carbide Coated, 83.5 ° Diamond
• TIG Torch Nozzles; Industry Specification: 105Z43; Type: Lava Nozzle; Orifice Size: 1/4; Orifice Size: 6.00; For Use With: Torch WP-17; 17V; 18; 18P; 18V; 26; 26V; Size: 4; Material: Lava; Suitable For: Torch WP-17, 17V, 18, 18P, 18V, 26, 26V; Suitable Fo
• Stainless Steel Pipe Nipple: 1/4″ Pipe, 1″ OAL, Grade 316L
• Chemical Resistant Gloves: 15 mil Thick, Nitrile Royal Blue, 26'' OAL, Rough
• Tarp/Dust Cover: Black & Green, Rectangle, Polyethylene, 12' Long x 9' Wide, 10 mil Polyethylene, Rectangle
• Garden Hose Fittings & Repair Kits; Connector Type: Quick Connect; Female; Male; Compatible Hose Diameter: 0.75; Thread Type: GHT; Material: Brass; Inside Diameter (Decimal Inch): 0.75; Material: Brass
• Evaporative Cooler Accessories; Type: Media Flap; For Use With: PACA40001A1; Width (Inch): 6; Length (Inch): 64
• Plastic Sheet: High Density Polyethylene, 3/8″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8967; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.5312; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Organic Vapor
• Plastic Bar: Acetal, 1″ Thick, White
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0501MC
• Sheet: Buna-N Rubber, 6″ Wide, 6″ Long, Black Durometer 50, Plain Backing
• Plastic Bar: Acrylonitrile Butadiene Styrene, 3/8″ Thick, Beige Rockwell R-105
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.5330; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Grooving Tool: Internal Solid Carbide
• Extra Length Drill Bit: 0.2559″ Dia, 118 °, High Speed Steel TiN Finish, Spiral Flute, Straight-Cylindrical Shank, Series 666
• Grooving Tool: Internal Solid Carbide
• Die Drill Bit: 0.1181″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Indexable Drill Insert: XCMT050204TC TT8020, Carbide Coated, 83.5 ° Diamond
• #4 Screw 13/16″ OAL 0.115″ ID x 3/16″ OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Die Drill Bit: 0.1200″ Dia, 135 °, Solid Carbide Uncoated, 5/8″ Flute, 1-1/2″ OAL, Series 200
• Hex Head Cap Screw: 1/4-20 x 1-1/2″, Grade 17-4PH Stainless Steel, Plain Finish Fully Threaded, ASME B18.2.1
• ER: ER20, 11 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Die Drill Bit: 0.1260″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• ER: ER20, 9 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Die & Mold Ejector Blades; Blade Thickness (Decimal Inch): 0.0320; Blade Width (Decimal Inch): 0.1720; Shank Diameter (mm): 0.1870; Head Diameter (mm): 0.3750; Head Height (Decimal Inch): 0.1870; Overall Length (Decimal Inch): 7.5000; Blade Length (Decima
• Die Drill Bit: 0.1220″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• ER: ER40 2″ OAL, 2″ Overall Diam
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8616; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Black Tee: 1 x 1 x 1/4″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• ER: ER40 2″ OAL, 2″ Overall Diam
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• Plastic Bar: Acetal, 3/8″ Thick, White
• #8 Stud, 16 to 14 AWG Compatible, Partially Insulated, Crimp Connection, Locking Fork Terminal Nylon Insulation, Blue, 600 Volts, Copper Contacts
• ER: ER40 2″ OAL, 2″ Overall Diam
• Professional Floor Cleaner & Degreaser Concentrate: 1 gal Bottle, Use on Cement, Concrete & Ceramic Tile
• Sheet: EPDM Rubber, 24″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Black Coupling: 1″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Plastic Bar: Polytetrafluoroethylene, 3/32″ Thick, White
• ER: ER40 2″ OAL, 2″ Overall Diam
• Striking Box End Wrench: 2-13/16", 12 Point, Single End
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 3/4″ Thick, White
• ER: ER40 2″ OAL, 2″ Overall Diam
• Sheet: Silicone Rubber, 6″ Wide, 6″ Long, Red Durometer 60, High Temperature Adhesive Backing
• Lathe Chuck Accessories; Accessory Type: Wiper; Product Compatibility: HC-21SE Chuck; Number Of Pieces: 2
• Taper Length Drill Bit: 0.1770″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• ER: ER40 2″ OAL, 2″ Overall Diam
• Taper Length Drill Bit: 0.1610″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 535
• Single Pole Protective Caps; Gender: Male; NEMA Rating: 3R, 4X, 12; For Use With: Male Plug; Standards Met: UL; cUL Listed
• Extra Length Drill Bit: 0.4134", 135 &deg, Solid Carbide
• ER: ER40 2″ OAL, 2″ Overall Diam
• Taper Length Drill Bit: 0.2165″ Dia, 118 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 317
• Single Pole Protective Caps; Gender: Male; NEMA Rating: 3R, 4X, 12; For Use With: Male Plug; Standards Met: UL; cUL Listed
• PVC Tube: 2″ ID, 2-1/2″ OD, 2' Long 100 Max psi, Clear
• ER: ER40 2″ OAL, 2″ Overall Diam
• Silicone Tube: 3/16″ OD, 50' Length 40 Max psi, Red
• ER: ER20, 5 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8834; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 100.00; Minimum Cutting Diameter (Decimal Inch): 3.9370; Maximum Cutting Diameter (mm): 113.00; Maximum Cutting Diameter (Decimal Inch): 4.4488; Maximum Depth of Cut (mm): 6.00; Maximum
• ER: ER20, 6 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Deep Socket Hand Socket: 3/8" Drive, 16.00 mm Socket, 6-Point
• Black Cap: 3/4″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• ER: ER20, 8 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Lathe Chuck Tools; Product Compatibility: Schunk Chucks; Self-ejecting: Yes; Product Type: Lathe Chuck Key; Product Compatibility: Schunk Chucks; Tool Type: Lathe Chuck Key
• Impact Socket: 1" Drive, 1-3/4" Socket, Hex Drive
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1″ Thick, 6″ Long, Blue, 4,250 psi Tensile Strength Shore D-70
• Abrasive Belt: 1" Wide, 42" OAL, Aluminum Oxide
• Strip: EPDM Rubber, 6″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Combination Wrench: 24.00 mm Head Size, 15 deg Offset
• Oxygen/Acetylene Torch Tips; Type: Cutting Tip; Tip Number: 1; Gas Type: Acetylene; Nozzle Type: One Piece; Type: Cutting Tip; Tip Type: Cutting Tip; Compatible Gas: Acetylene
• Chamfer Mill: 3/16" Dia, 3/16" Shank Dia, 40.00 deg, 4 Flute, Solid Carbide, Single End
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 50, Plain Backing
• Flare Nut Wrenches; Head Type: Straight; Double/Single End: Double; Opening Type: 12-Point Flare Nut; Material: High Carbon Steel; Finish: Oxide
• M4 Screw 51mm OAL 4.2mm ID x 13mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• M5 Screw 51mm OAL 5.3mm ID x 13mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• ER: ER20, 10 mm 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Ball Grip Quick-Release Pin: L-Handle, 5 mm Pin Dia, 60 mm Usable Length 92.3 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.0980; Drill Bit Size (Wire): #40; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decimal
• Plastic Sheet: Cast Acrylic, 1/8″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• ER: ER20, 0.125″ 31.5mm OAL, 21mm Overall Diam, 0.0004″ TIR
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.0938; Drill Bit Size (Inch): 0.0937; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Four Facet; Overall Length (Decimal Inch): 2.1250; Overall Length (Decim
• ER: ER40 2″ OAL, 2″ Overall Diam
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9152; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Compression Tube:
• Black Hex Bushing: 1-1/4 x 1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Speed Bumps, Parking Curbs & Accessories; Type: Standard Speed Bump End Cap; Length (Inch): 7; Width (Inch): 12; Height (Inch): 2.6; Color: Black; Material: Recycled Rubber
• Sign Posts & Traffic Sign Accessories; Type: U-Channel Adapter; For Use With: 30 lb & 60 lb Rubber Bases (with Center Square Hole); Includes: Hardware; Special Features: Adapter Is Made To Fit Our Rubber Bases With A Square Hole In The Center Only; Produc
• #6-32, 1/2″ OAL, 3/16″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1/4″ Body Length, 1/4″ Thread Length, 1/8″ Thread Depth, Grade 12L14, Zinc-Plated
• #4 Screw 15/32″ OAL 0.115″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• #4 Screw 7/16″ OAL 0.115″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Deep Socket Hand Socket: 3/8" Drive, 15.00 mm Socket, 6-Point
• Feminine Hygiene Products; Type: Tampon; Absorption Level: Regular; Additional Information: Regular; Product Type: Tampon
• #2 Screw 15/32″ OAL 0.09″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Extra Length Drill Bit: 0.3228", 135 &deg, Solid Carbide
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• Black Extension: 1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.2913; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• 320 Grit Aluminum Oxide Square Polishing Stone Extra Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick, Oil Filled
• Knob Locksets; Type: Storeroom; Key Type: Keyed Different; Material: Metal; Finish/Coating: Satin Chrome; Compatible Door Thickness: 1-3/8" to 1-3/4"; Backset: 2.75; Lockset Grade: Grade 2
• 400 Grit Aluminum Oxide Square Polishing Stone Super Fine Grade, 1/4″ Wide x 6″ Long x 1/4″ Thick, Oil Filled
• Taper Length Drill Bit: 0.1570″ Dia, 130 ° Bright/Uncoated, 3.0709″ Flute Length, 4.685″ OAL, RH Cut, Parabolic Flute, Cylindrical Shank, Series 501
• Taper Length Drill Bit: 0.1890″ Dia, 130 ° Bright/Uncoated, RH Cut, Spiral Flute, Straight Shank, Series 219
• Mobile Workstation Mobile Work Center: 36" OAD
• Flap Disc: 4-1/2″ Dia, 7/8″ Hole, Aluminum Oxide, Type 27 Non-Woven, Coarse Grade, Fiberglass-Backed, 13,300 RPM
• 320 Grit Aluminum Oxide Rectangular Polishing Stone Extra Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Taper Length Drill Bit: 0.1770″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Abrasive Belt: 3/4" Wide, 20-1/2" OAL, Aluminum Oxide
• 320 Grit Aluminum Oxide Square Polishing Stone Extra Fine Grade, 1/4″ Wide x 4″ Long x 1/4″ Thick
• Square End Mill: 20.00 mm Dia, 52.00 mm LOC, 2 Flute, Solid Carbide
• Plastic Sheet: High Density Polyethylene, 1/4″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• 400 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 6″ Long x 1/8″ Thick
• Cut-Off Inserts; Insert Style: QD-N; Insert Size Code: G; Insert Material: HC; Manufacturer Grade: 4425; Cutting Width (Decimal Inch): 0.1181; Lead Angle Direction: Neutral; Insert Hand: Neutral; Lead Angle: 0; Relief Angle: 7.00; Corner Radius (Decimal I
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3908; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Strip: EPDM Rubber, 3/4″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• 600 Grit Aluminum Oxide Rectangular Polishing Stone Super Fine Grade, 1/2″ Wide x 4″ Long x 1/16″ Thick
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T15; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 3.14960; Package Quantity: 1
• Milling Insert: XP3035, Solid Carbide
• Impact Socket: 1" Drive, 3/4" Socket, Hex Drive
• Size L Hi-Vis Yellow High Visibility Short Sleeve T-Shirt Polyester
• Tank Flanges; Overall Height (Inch): 25/32
• Circular Ring Terminal: Partially Insulated, 12 to 10 AWG, Crimp Connection 1.52″ Long, 0.756″ Wide, Copper Contact, Yellow
• M42 CLAW Fleam Ground Hole Saw
• Fabric Refreshers & Dryer Sheets; Type: Fabric Softener Sheet; Number of Sheets: 120; Scent: Fresh; Container Type: Box
• Ball Grip Quick-Release Pin: T-Handle, 8 mm Pin Dia, 60 mm Usable Length 92.3 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Extra Length Drill Bit: 0.1693", 140 &deg, Carbide
• 220 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• Steel Shelving; Shelf Type: Closed Beaded Post Starter; Starter or Add-On: Starter; Adjustment Type: Clip; Boltless: Yes; Shelf Capacity: 500; Mount Type: Floor
• Ball Grip Quick-Release Pin: T-Handle, 10 mm Pin Dia, 50 mm Usable Length 86.8 mm OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Stainless Steel Pipe Nipple: 2″ Pipe, Grade 304 Schedule 40
• 180 Grit Aluminum Oxide Rectangular Polishing Stone Very Fine Grade, 3/4″ Wide x 6″ Long x 1/4″ Thick
• Hex Drive & Slotted Drive Threaded Inserts; Product Type: Knife; System of Measurement: Inch; Thread Size: #4-40; For Material Type: Wood; Material: Stainless Steel; Overall Length (Decimal Inch): 0.3750; Insert Diameter (Decimal Inch): 0.2500; Hole Diame
• Plastic Sheet: Garolite, 1/4″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Lumber; Thickness: 2; Width: 6; Length Ft.: 10; Wood Type: Southern Yellow Pine; Treated: KDHTPT
• Milling Insert: XP3035, Solid Carbide
• Indexable Square-Shoulder Face Mill: MA90125R12T12CM, 1.5748" Arbor Hole Dia, 0.4724" Max Cutting Depth
• Plastic Sheet: Nylon 6/6, 1″ Thick, 6″ Long, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• Twinkle Stainless Steel Cleaner & Polish, 17 oz, RTU
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/8″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• M4x0.7, 25.53mm OAL, 8mm Across Flats, Brass Male/Female Hex Circuit Board Standoff Fully Threaded, 16mm Body Length, 9.53mm Thread Length, 11.1mm Thread Depth, Grade 360, Zinc-Plated
• Ink Cartridge: Yellow Use with Brother MFC-J460DW, J480DW, J485DW, J680DW, J880DW, J885DW, J4320DW, J4420DW, J4620DW, J5520DW & J5620DW
• Ink Cartridge: Magenta Use with Brother MFC-J460DW, J480DW, J485DW, J680DW, J880DW, J885DW, J4320DW, J4420DW, J4620DW, J5520DW & J5620DW
• Milling Insert: XP2025, Solid Carbide
• Black Tee: 1 x 1 x 3/8″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Corner Radius End Mill: 1" Dia, 1-1/4" LOC, 1.52 mm Radius, 8 Flute, Solid Carbide
• Black Hex Bushing: 1-1/2 x 3/8″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Ball Grip Quick-Release Pin: Ring Handle, 5/16″ Pin Dia, 1-1/2″ Usable Length 2.99″ OAL, 302 Stainless Steel, Stainless Steel Handle
• Brass Pipe 90 ° Elbow: 1/4″ Fitting, FNPT x FNPT, Class 250, Lead Free 250 psi, Brass
• Die Drill Bit: 3/16″ Dia, 135 °, Solid Carbide ALtima Finish, 5/8″ Flute Length, 2″ OAL
• Full Taper Cartridge Rolls; Maximum Roll Diameter (Decimal Inch): 0.5000; Maximum Roll Diameter (Fractional Inch): 1/2; Overall Length (Inch): 1-1/2; Abrasive Material: Aluminum Oxide; Grade: Coarse; Grit: 60; Pilot Hole Diameter (Decimal Inch): 0.1250; P
• Pipe Fitting: 1/8 x 1/8″ Fitting, 316 Stainless Steel 150 psi
• Straight Cartridge Roll: 1/2" Dia, 1-1/2" OAL, 60 N/A Aluminum Oxide
• Swiss-Pattern File: 6″ OAL, Cut 2, Regular Pillar 4″ LOC, 1/2″ Wide, 11/64″ Thick, Tang
• Plastic Sheet: Carbon Fiber, 1/16″ Thick, Black
• Pipe Fitting: 1/4 x 1/4″ Fitting, 316 Stainless Steel 6,600 psi
• Toilet Seats; Type: Heavy-Duty Open Front Toilet Seat; Style: Traditional; Material: Plastic; Color: White; Outside Width: 14-3/8; Inside Width: 7-7/8; Length (Inch): 14-3/8; Installations: Residential, Commercial; Minimum Order Quantity: Plastic; Materia
• Laydown Threading Inserts; Insert Style: 06IR; Insert Size Code: 06; Insert Material: Solid Carbide; Manufacturer Grade: PR1115; Thread Type: Internal; Pitch (mm): 0.75 to 1.25; Insert Hand: Right Hand; Included Angle: 60; Series: 06IR; Coating Process: P
• Milling Insert: XP2025, Solid Carbide
• Micro Drill Bit: 0.0039″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Cut, Puncture & Abrasive-Resistant Gloves: Size 2XL, ANSI Cut A3, ANSI Puncture 4, Nitrile, HPPE, Nylon & Glass Gray & Red, 11″ OAL, Palm Coated, HPPE, Nylon & Glass Back, Nitrile Dipped Grip, ANSI Abrasion 4
• Extra Length Drill Bit: 0.1654", 140 &deg, Carbide
• Micro Drill Bit: 0.0043″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Deadbolts; Deadbolt Type: Deadlock; Lock Type: Single Cylinder; Key Type: Conventional; Mount Type: Mortise; Material: Metal; Minimum Door Thickness: 1.375 in; Maximum Door Thickness: 1.75; Finish: Matte Black
• M5x0.8 Coarse 10mm Long Hex Thread Cutting Screw 12L14 Steel, Hex Washer Head, Self Drilling Point, Zinc-Plated
• Micro Drill Bit: 0.0047″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Deadbolts; Deadbolt Type: Deadlatch; Lock Type: Single Cylinder; Key Type: Key Codeable; Mount Type: Surface; Material: Metal; Minimum Door Thickness: 1.375 in; Maximum Door Thickness: 1.75; Finish: Satin Nickel
• Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.000015/-0.000015; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3154; Calibrated: Yes; Traceability Certification Included: NIST; Standards: B47.1 Gage Standa
• Micro Drill Bit: 0.0051″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Micro Drill Bit: 0.0055″ Dia, 118 °, Solid Carbide Bright/Uncoated, RH Cut, Straight-Cylindrical Shank, Series DB130 Advance
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 100.00; Minimum Cutting Diameter (Decimal Inch): 3.9370; Maximum Cutting Diameter (mm): 113.00; Maximum Cutting Diameter (Decimal Inch): 4.4488; Maximum Depth of Cut (mm): 6.00; Maximum
• Rubber & Foam Cylinders; Cell Type: Closed; Minimum Temperature: -100.0 ™F; Maximum Temperature: 500.0 ™F; Tensile Strength: 100.0 psi; Tensile Strength (psi): 100.0 psi; Maximum Temperature (F): 500.0 ™F; Minimum Temperature (F): -100.0 ™F; Foam Structur
• Plastic Sheet: Polycarbonate, 3/32″ Thick, Clear Rockwell R-120
• Swiss-Pattern File: 5-1/2″ OAL, Cut 0, Three Square 3-1/2″ LOC, 7/64″ Wide, 7/64″ Thick, Handle
• Turning Insert: DCET21505LPPS KTP25S, Carbide
• Plastic Sheet: Garolite, 3/8″ Thick, 6″ Long, Green, 37,000 psi Tensile Strength Rockwell M-110
• Turning Insert: DCET21502LPPS KTP25S, Carbide
• Arc Flash Clothing Kit: Size X-Large, Cotton, Jacket, Pants & Hoods
• Milling Insert: XP2040, Solid Carbide
• Push-To-Connect Tube Fitting: Male Straight Nylon, 350 psi
• Hand Cleaner: 3 L Bottle Liquid, Orange, Orange Scent
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.8635; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Pillowcase 36″ Wide x 42″ Long
• Welded Bandsaw Blade: 12' 6″ Long, 1/4″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Milling Insert: XP2040, Solid Carbide
• Grooving Tool: Full Radius Solid Carbide, 3/16″ Shank Dia, 0.02″ Groove Width
• Guhring GZ222.0300.020.PM.01.L.08 3.00mm Cut-Off Insert
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Guhring GZ222.0300.020.PM.01.R.08 3.00mm Cut-Off Insert
• Grooving Tool: Retaining Ring Solid Carbide, 3/16″ Shank Dia, 0.017″ Groove Width
• Class X Plus Pin Gage: 0.5531″ Dia, 3″ Long Micro Finish
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/4″ Thick, White, 4,250 psi Tensile Strength Shore D-70
• Guhring GZ222.0300.020.PP.02.N 3.00mm Cut-Off Insert
• Grooving Tool: Full Radius Solid Carbide, 3/16″ Shank Dia, 0.017″ Groove Width
• Class X Plus Pin Gage: 0.5526″ Dia, 3″ Long Micro Finish
• Black Hex Bushing: 1-1/2 x 1/2″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Swiss-Pattern File: 6-1/4″ OAL, Cut 4, Round 4-1/4″ LOC, 1/8″ Wide, 1/16″ Thick, Tang
• Cut, Puncture & Abrasive-Resistant Gloves: Size L, ANSI Cut A4, ANSI Puncture 3, Nitrile, HPPE Black, Palm Coated, ANSI Abrasion 4
• Class X Plus Pin Gage: 0.5523″ Dia, 3″ Long Micro Finish
• Black Plug: 3/4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• #4-40, 3.1869″ OAL, 1/4″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 3″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 12L14, Zinc-Plated
• Class X Plus Pin Gage: 0.5506″ Dia, 3″ Long Micro Finish
• Hex Key: 10 mm Hex, Long Arm 112 mm OAL, Vanadium Steel
• #2 Screw 1-7/16″ OAL 0.09″ ID x 1/4″ OD Round Steel Circuit Board Spacers Zinc-Clear Coated, Grade 12L14, Female Unthreaded
• Class X Plus Pin Gage: 0.5504″ Dia, 3″ Long Micro Finish
• Class X Plus Pin Gage: 0.5503″ Dia, 3″ Long Micro Finish
• Welded Bandsaw Blade: 9' 11-1/4″ Long, 1/4″ Wide, 0.025″ Thick, 6 TPI Carbon Steel, Toothed Edge
• Class X Plus Pin Gage: 0.5494″ Dia, 3″ Long Micro Finish
• Welded Bandsaw Blade: 9' 7″ Long, 1/2″ Wide, 0.025″ Thick, 10 TPI Carbon Steel, Toothed Edge
• Class X Plus Pin Gage: 0.5492″ Dia, 3″ Long Micro Finish
• Welded Bandsaw Blade: 10' 5″ Long, 1/4″ Wide, 0.025″ Thick, 14 TPI Carbon Steel, Toothed Edge
• Plastic Bar: Cast Acrylic, 1/2″ Thick, Clear Rockwell M-95
• Class X Plus Pin Gage: 0.5474″ Dia, 3″ Long Micro Finish
• Plastic Sheet: Garolite, 1/16″ Thick, 6″ Long, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Class X Plus Pin Gage: 0.5473″ Dia, 3″ Long Micro Finish
• Class X Plus Pin Gage: 0.5468″ Dia, 3″ Long Micro Finish
• Buckets & Pails
• Class X Plus Pin Gage: 0.5467″ Dia, 3″ Long Micro Finish