Products

• Indexable Boring Bar: A32S-PWLNR06-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 95.00&deg N/A Steel 250.0000″ OAL, Lever,
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, 0.312″ Shank Dia, Solid Carbide 24 TPI, 0.26″ Cut Dia, 0.67″ LOC, 2.5″ OAL, AM210 Coated
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.2362 in; Shank Type: Modular; Toolholder Style: 1DE1H; Shank Diameter (Inch): 1.1300; Shank Diameter (mm): 1.1300; Maximum Ramping Angle: 1.2 ™; Compatible Insert Style: RNLU; Compatible Insert Size Code:
• Plastic Sheet: Acetal, 2-3/4″ Thick, White Rockwell M-90
• Zep-O-Shine Car Wash with Polymer Wax
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: THTB; Compatible Blade Height: 1.0000 in; Compatible Blade Width: 0.1930 in; Shank Height: 1.0000 in; Shank Width: 0.8660 in; Overall Width: 1; Overall Length (mm): 6.50; Overall Length (Decimal Inch)
• Single Pole Plugs & Connectors; Connector Type: Male; End Style: Male; Termination Method: Double Set Screw; Amperage: 300 A; Voltage: 600 V; Maximum Compatible Wire Size (AWG): 6 AWG; NEMA Rating: 3R, 4X, 12; Voltage: 600 V; Amperage: 300 A; Maximum Comp
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1968 in; Shank Type: Modular; Toolholder Style: 15B1A; Shank Diameter (Inch): 1.1300; Shank Diameter (mm): 1.1300; Maximum Ramping Angle: 10 ™; Compatible Insert Style: RJET; Compatible Insert Size Code:
• Household Trash Bag: 30 gal, 1.1 mil, Pack of (222) 30″ Wide, 33″ High, Plastic, Black
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: VC..22.; Toolholder Style: SVJCR; Rake: Positive; Rake Angle: 7.000; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Screw; Shank Width (mm): 20.00; Sh
• Roll: SBR Rubber, 12″ Wide, Black Durometer 60, Plain Backing
• Helical Flute Thread Mill: 7/16, Internal & External, 4 Flute, 0.312″ Shank Dia, Solid Carbide 14 TPI, 0.3″ Cut Dia, 0.98″ LOC, 2.5″ OAL, AM210 Coated
• Indexable High-Feed End Mill: 1/2″ Cut Dia, 0.49″ Modular Shank Uses 3 SDXS Inserts, 0.023″ Max Depth, 3/4″ OAL, Through Coolant
• Indexable Turning Toolholders; Hand of Holder: Left Hand; Toolholder Style: LLTH; Rake: Negative; Rake Angle: -13; Multi-use Tool: Yes; Lead Angle: 117.5; Insert Holding Method: Lock Pin; Lever Lock; Shank Width (Decimal Inch): 0.9843; Insert Compatibilit
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Indexable High-Feed Face Mills; Cutting Diameter (mm): 17.6; Cutting Diameter (Decimal Inch): 0.692913; Maximum Depth of Cut (mm): 0.8; Maximum Depth of Cut (Decimal Inch): 0.0315; Shank Diameter (mm): 17.6; Series: CoroMill MH20; Cutter Style: MH20-AR..E
• Helical Flute Thread Mill: 7/16, Internal & External, 4 Flute, Solid Carbide 14 TPI, AM210 Coated
• Hex Head Cap Screw: 3/8-16 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Hex Head Cap Screw: 3/4-10 x 3-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Helical Flute Thread Mill: 7/16, Internal & External, 4 Flute, Solid Carbide 20 TPI, AM210 Coated
• Indexable High-Feed Face Mills; Cutting Diameter (mm): 15.8; Cutting Diameter (Decimal Inch): 0.622047; Maximum Depth of Cut (mm): 1.2; Maximum Depth of Cut (Decimal Inch): 0.0472; Shank Diameter (mm): 15.8; Series: CoroMill MH20; Cutter Style: MH20-AR..E
• M12 Screw 51mm OAL 12mm ID x 19mm OD Round Aluminum Circuit Board Spacers Uncoated, Grade T-3, Female Unthreaded
• Air Die Grinder: 1/4'' Collet 0.5 hp, 3.9 CFM, Rear Exhaust
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, Solid Carbide 24 TPI, AM210 Coated
• Modular Turning & Profiling Cutting Unit Heads; Cutting Direction: Left Hand; Compatible Insert Style: DN..; Compatible Insert Size Code: 44; 43; Insert Holding Method: Lever; Series: PDUN; Cutting Tool Application: Boring
• Roller Rail Systems; Roller Rail Type: Track Roller; Overall Length (mm): 315.1400; Overall Width (Decimal Inch): 2.1700; Overall Height (Decimal Inch): 1.4600; Hole Spacing: 0.0 in; 0.0 mm; Load Capacity (Lb.): 2653.000; Type: Track Roller; Hole Spacing:
• Helical Flute Thread Mill: 5/16, Internal & External, 3 Flute, Solid Carbide 24 TPI, AM210 Coated
• Indexable Cut-Off Blade Tool Blocks; Tool Block Style: THTB; Compatible Blade Height: 1.0000 in; Compatible Blade Width: 0.1930 in; Shank Height: 1.0000 in; Shank Width: 0.8660 in; Overall Width: 1; Overall Length (mm): 6.50; Overall Length (Decimal Inch)
• Helical Flute Thread Mill: 3/8, Internal & External, 3 Flute, 0.312″ Shank Dia, Solid Carbide 16 TPI, 0.264″ Cut Dia, 0.87″ LOC, 2.5″ OAL, AM210 Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, Solid Carbide AM210 Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, Solid Carbide AM210 Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, 0.312″ Shank Dia, Solid Carbide 0.31″ Cut Dia, 1.418″ LOC, 2.5″ OAL, AM210 Coated
• Indexable Insert Drills; Drill Style: DRZ; Maximum Drill Diameter (mm): 13.00; Drill Diameter (mm): 13.00; Maximum Drill Depth (mm): 39.12; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Number of Drill Inserts: 2; Cutting Direction: Right
• Helical Flute Thread Mill: Internal & External, 4 Flute, 0.312″ Shank Dia, Solid Carbide 0.31″ Cut Dia, 0.945″ LOC, 2.5″ OAL, AM210 Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, 0.312″ Shank Dia, Solid Carbide 0.307″ Cut Dia, 1.12″ LOC, 2.5″ OAL, AM210 Coated
• Helical Flute Thread Mill: Internal & External, 4 Flute, Solid Carbide AM210 Coated
• Hex Head Cap Screw: 1-1/2 12 x 6″, Grade L9 Steel, Zinc Yellow Dichromate Finish - Partially Threaded
• Milling Tip Inserts; Milling Tip Type: High Feed; Milling Tip Style: XHF; Maximum Depth of Cut (mm): 0.60; Cutting Diameter (mm): 16.00; Tool Material: Carbide; Depth of Cut (mm): 0.60; Manufacturer Grade: HXT; Chipbreaker: None; Series: XHF780; Coating P
• Milling Tip Inserts; Milling Tip Type: High Feed; Milling Tip Style: XHF; Maximum Depth of Cut (Decimal Inch): 0.0236; Cutting Diameter (Decimal Inch): 0.6250; Tool Material: Carbide; Manufacturer Grade: HXT; Chipbreaker: None; Series: XHF780; Coating Pro
• Shrink-Fit Tool Holder & Adapter: CAT50 Taper Shank, 0.375″ Hole Dia 6.3″ Projection, 0.94″ Nose Dia, 1.2563″ Clamp Depth, Through Coolant
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Replaceable Tip Drill: 1.0236 to 1.0626'' Drill Dia, 3.1875″ Max Depth Seat Size 0.3300, Through Coolant
• Shrink-Fit Tool Holder & Adapter: CAT50 Taper Shank Through Coolant
• Combination Hand Tool Sets; Set Type: Impact Hand Driver Set; Container Type: Blow Mold Case; Measurement Type: Inch & Metric; Container Material: Plastic; Drive Size: 1/2; Insulated: No; Case Type: Blow Mold Case; Contents: 13 pieces; Hex Size (Inch - 0
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.6890; Drill Diameter (mm): 17.50; Maximum Drill Depth (mm): 54.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Plain Backing
• Speed Reducer: 2 hp Max Input
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Plain Backing
• Kyocera MFWN90050R 05 5T M Metric Bore Diameter, Course Pitch, 5 Flute, 90 Degree Face Mill with a 50.00mm Cutting Diameter for Shouldering, Slotting, Facing, Plunging Applications
• 1.28″ Max Depth, 0.079 to 2.559″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 5.906″ OAL, 25mm Shank Height, Uses SA 35-20\x85 Inserts, HSA Monoblock Toolholder, Series SA Parting / Grooving
• Plastic Sheet: Garolite, 3/8″ Thick, Green, 37,000 psi Tensile Strength Rockwell M-110
• Die Drill Bit: 0.3031″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Doors; Core Type: Solid
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 24; Cutting Width (Decimal Inch): 24; Cutting Width (Inch): 24
• Sign Posts & Traffic Sign Accessories; Type: Tri-Pod Sign Stand; Sign Post/Stand Height (Feet): 4; Sign Height Compatibility (Inch): 48; Sign Width Compatibility (Inch): 48; Material: Steel; For Use With: 36 in & 48 in Rigid Road Work & Warning Signs; Inc
• Toner Cartridge: Yellow Use with Lexmark C746 Series & C748 Series
• Chainsaws; Type of Power: Battery; Bar Length: 10; Speed (RPM): 4,720 FPM; Power Type: Battery
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• 140,000 to 180,000 BTU Diesel/Kerosene/JP-8/Jet A Forced Air Heater with Thermostat 4,200 Sq Ft Max Heating Area, 13 Gal Fuel Capacity, 600 CFM, 23.11″ Wide x 47.44″ Long x 33.46″ High
• Roller Rail Systems; Roller Rail Type: Track Roller; Overall Length (mm): 201.3200; Overall Width (Decimal Inch): 2.1700; Overall Height (Decimal Inch): 1.4600; Hole Spacing: 0.0 in; 0.0 mm; Load Capacity (Lb.): 2653.000; Type: Track Roller; Hole Spacing:
• Die Drill Bit: 27/64″ Dia, 135 °, Solid Carbide ALtima Finish, 1″ Flute Length, 2-3/4″ OAL
• 0.512″ Max Depth, 0.079 to 1.024″ Width, External Right Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, Uses SA 24-20\x85 Inserts, HSA Monoblock Toolholder, Through Coolant, Series SA Parting / Grooving
• Fixture Globes, Lenses & Diffusers; For Use With: VM Series; Material: Glass; Lens Features: Clear; Overall Height (Decimal Inch): 7-1/2; Lens Features: Clear
• Welded Bandsaw Blade: 17' 6″ Long, 1-1/2″ Wide, 0.05″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 40, Acrylic Adhesive Backing
• Strip: Neoprene Rubber, 6″ Wide, 120″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Replaceable Tip Drill: 1.024 to 1.059'' Drill Dia, 12.47″ Max Depth, 1.25'' Straight-Cylindrical Shank Uses ICP Inserts, Through Coolant
• All-Purpose Cleaner: 14 gal Can Liquid & Aerosol, Mint Scent
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Galvanized High Carbon Steel Upright & Feet; Barricade Width (Inch): 48; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 19.0000; Top Panel Height (Inch
• Replaceable Tip Drill: 26 to 26.9 mm Drill Dia, 316.7 mm Max Depth, 32 mm Straight-Cylindrical Shank Uses ICP Inserts, 441.1 mm OAL, Through Coolant
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 60, Plain Backing
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Plastic Board; Galvanized High Carbon Steel Upright & Feet; Barricade Width (Inch): 48; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 19.0000; Top Panel Height (Inch
• Speed Reducer: 2 hp Max Input
• Indexable High-Feed Face Mills; Cutting Diameter (Decimal Inch): 2.5670; Maximum Depth of Cut (Decimal Inch): 0.0984; Arbor Hole Diameter (Decimal Inch): 1.0000; Overall Height (Decimal Inch): 2.4800; Series: MFH-Max Milling; Cutter Style: MFH; Number of
• Duct Hose: Polyvinylchloride, 6″ ID, 8 Hg Vac Rating, 11 psi 25' Long, 20 to 160 ° F, Clear
• Plastic Sheet: Garolite, 1/2″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Stationary Stools; Type: Adjustable Height Stool w/Adjustable Back; Base Type: Steel; Width (Inch): 14; Depth (Inch): 14; Seat Material: Vinyl; Color: Black; Seat Type: Round; Minimum Height: 44
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.9843; Drill Diameter (mm): 25.00; Maximum Drill Depth (mm): 75.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Windows; Frame Material: Vinyl; Window Style: Single Hung
• Plastic Sheet: Garolite, 1/4″ Thick, Black, 16,000 psi Tensile Strength Rockwell M-100
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0039; Drill Diameter (mm): 25.50; Maximum Drill Depth (mm): 77.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Lubricators; Type: General Purpose; Port Size NPT: 1/4; Maximum Working Pressure (psi): 250 psi; Body Material: Aluminum; Bowl Material: Aluminum; Cubic Feet per Minute: 60 SCFM; Maximum Temperature (F): 176 ™F; Drain Type: Manual; Seal Material: Neopren
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Stain Romver with Peroxide Carpet Care
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.8858; Drill Diameter (mm): 22.50; Maximum Drill Depth (mm): 68.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.9449; Drill Diameter (mm): 24.00; Maximum Drill Depth (mm): 72.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.9646; Drill Diameter (mm): 24.50; Maximum Drill Depth (mm): 74.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.9055; Drill Diameter (mm): 23.00; Maximum Drill Depth (mm): 69.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Foaming Vehicle Shampoo Vehicle Shampoo
• Penetrant & Lubricant: 1 gal Bottle Dark Brown
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.9252; Drill Diameter (mm): 23.50; Maximum Drill Depth (mm): 71.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Sidewinder Stalk Military Helmet Light System with Flexible Stalk and ARC Rail Mount
• Sidewinder Stalk Military Helmet Light System with Flexible Stalk and ARC Rail Mount
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 400 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 495.5 mm OAL, Through Coolant
• Replaceable Tip Drill: 14 to 14.4 mm Drill Dia, 400 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 487.5 mm OAL, Through Coolant
• Flux & Soldering Chemicals; Type: Universal Flux Thinner; Flux Thinner; Volume Capacity: 1 Gal.; Container Type: Bottle; Container Type: Bottle; Type: Universal Flux Thinner; Flux Thinner; Container Size: 1 gal; Type: Universal Flux Thinner; Flux Thinner;
• Replaceable Tip Drill: 14.5 to 14.9 mm Drill Dia, 400 mm Max Depth, Modular Connection Shank Uses HCP Inserts, 487.5 mm OAL, Through Coolant
• Pants & Chaps
• Plastic Sheet: Acetal, 3/8″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Pants & Chaps
• Pants & Chaps
• Pants & Chaps
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.2360 in; Shank Type: Weldon; Toolholder Style: 1DE1H; Shank Diameter (Inch): 1.5000; Shank Diameter (mm): 1.5000; Maximum Ramping Angle: 1.2 ™; Compatible Insert Style: RNLU; Compatible Insert Size Code:
• Pants & Chaps
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 40 mm Stroke, M25 x 1.5 Thread 200.5 mm OAL, 71.4 lb Force
• Indexable High-Feed End Mill: 1-1/2″ Cut Dia, 1-1/4″ Cylindrical Shank Uses 5 SDXS Inserts, 0.06″ Max Depth, 10″ OAL, Through Coolant
• Pants & Chaps
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 40 mm Stroke, M25 x 1.5 Thread 200.5 mm OAL, 71.4 lb Force
• Indexable Ball Nose End Mills; Milling Diameter: 2.0000 in; Maximum Depth Of Cut: 1.7000 in; Shank Diameter: 2.0000 in; Shank Type: Modular; Compatible Insert Style: NDET; Compatible Insert Size Code: 5008; Toolholder Style: 1BW7Y; Series: 1BW7; Overall L
• Industrial & Laundry Faucets; Type: Base Mount Faucet; Style: Base Mounted; Design: Base Mounted; Handle Type: Lever; Spout Type: Swing Spout/Nozzle; Mounting Centers: Single Hole; Spout Size: 6; Finish/Coating: Chrome Plated Brass; Type: Base Mount Fauce
• Traffic Barricades; Type: A-Frame; Barricade Height (Inch): 40; Material: Plastic; Barricade Width (Inch): 29; Reflective: Yes; Compliance: None; Color: White; Weight (Lb.): 6.0000; Top Panel Height (Inch): 8; Top Panel Width (Inch): 120; Bottom Panel Hei
• Cordless Hammer Drill: 18V, 1/2″ Chuck, 28,500 BPM, 1,900 RPM Keyless Chuck, Reversible, 2
• Tool Holder Tightening Fixtures; Compatible Taper: CAT50; Overall Height (Decimal Inch): 8.5000; Base Length (Inch): 6-1/2; Number Of Positions: 1
• 0.512″ Max Depth, 0.079 to 1.024″ Width, External Right Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, Uses SA 24-20\x85 Inserts, HSA Monoblock Toolholder, Through Coolant, Series SA Parting / Grooving
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 10 mm Shank Height, 10 mm Shank Width, Uses GCMN Inserts, Series GND
• Air Cylinder Accessories; Type: Locking Unit; Accessory Type: Locking Unit; For Use With: Cylinder; Material: Aluminum
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 10 mm Shank Height, 10 mm Shank Width, Uses GCMN Inserts, Series GND
• Boring Head: 1-1/2″ Body Dia, Manual 7/8-20 Threaded Mount, Modular Connection Shank, Series Cri-Bore
• RH FIX8 Negative (Axial) Negative (Radial) Indexable Turning Toolholder - 93deg; Lead Angle, -6° (Axial)/-6.5° (Radial), 40 x 40mm Shank, Takes CNUX191016R Inserts
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 10 mm Shank Height, 10 mm Shank Width, Uses GCMN Inserts, Series GND
• Boring Head: 1-1/2″ Body Dia, Manual 7/8-20 Threaded Mount, Modular Connection Shank, Series Cri-Bore
• LH FIX8 Negative (Axial) Negative (Radial) Indexable Turning Toolholder - 93deg; Lead Angle, -6° (Axial)/-6.5° (Radial), 1-1/2 x 1-1/2″ Shank, Takes CNUX191016R Inserts
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Right Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 117 mm; Housing Material: Stainless Steel; Lock Type: Set Screw; Static Load Capacity: 2000.00; Number Of Bolts: 2; Maximum RPM: 4950.000; Series: UCFLSS
• Hex Head Cap Screw: 9/16-18 x 1″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• RH FIX8 Negative (Axial) Negative (Radial) Indexable Turning Toolholder - 93deg; Lead Angle, -6° (Axial)/-6.5° (Radial), 1-1/2 x 1-1/2″ Shank, Takes CNUX191016R Inserts
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/4″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Left Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Right Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Traffic Barrels, Delineators & Posts; Type: Traffic Drum; Material: LDPE; Reflective: No; Base Needed: Yes; Height (Inch): 39.7; Width (Inch): 23-1/2; Additional Information: Sub Brand: Commander ™; Rubber Base Sold Separately; Series: 456; Color: Orange;
• Calibration Gas & Equipment; Type: Calibration Gas; Gas Contents: Carbon Monoxide - 60 ppm; CH4 - 1.45%; Nitrogen Dioxide - 10 ppm; Gas Contents: Carbon Monoxide - 60 ppm; CH4 - 1.45%; Nitrogen Dioxide - 10 ppm; Cylinder Capacity: 58.0 L; Volume Capacity
• Welded Bandsaw Blade: 22' 3″ Long, 1-1/4″ Wide, 0.042″ Thick, 8 to 11 TPI Bi-Metal, Toothed Edge
• Smoke Screen Deodorizer Aerosol Malodor Counteractant
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Left Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Bio Bathroom Biological Bathroom Cleaner
• Formula 777 Grass & Weed Killer
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Left Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Welded Bandsaw Blade: 17' 4-3/4″ Long, 1-1/2″ Wide, 0.05″ Thick, 1.5 to 2 TPI Carbide Tipped, Toothed Edge
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Right Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2402; Drill Diameter (mm): 31.50; Maximum Drill Depth (mm): 160.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2795; Drill Diameter (mm): 32.50; Maximum Drill Depth (mm): 165.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Modular; Toolholder Style: 15B8E; Shank Diameter (Inch): 0.7000; Shank Diameter (mm): 0.7000; Maximum Ramping Angle: 4 ™; Compatible Insert Style: RJET; Compatible Insert Size Code: 0
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Left Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2598; Drill Diameter (mm): 32.00; Maximum Drill Depth (mm): 160.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Flaring Tools & Tube Expanders; Type: Tube Expander; Maximum Pipe Capacity (Inch): 28.0 mm; Maximum Pipe Capacity (mm): 28; 28.0 mm; Minimum Pipe Capacity: 28.0 mm; Minimum Pipe Capacity: 28.0 mm; Minimum Pipe Capacity: 28.0 mm; Maximum Pipe Capacity: 28.
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.1574 in; Shank Type: Cylindrical; Toolholder Style: 15B8E; Shank Diameter (Inch): 0.7500; Shank Diameter (mm): 0.7500; Maximum Ramping Angle: 4 ™; Compatible Insert Style: RJET; Compatible Insert Size Cod
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 10 mm Shank Height, 10 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Concave Radius Cutters; Cutter Diameter (Inch): 0.7500; Maximum Depth Of Cut: 1.7000 in; Minimum Cutting Radius (Decimal Inch): 0.0310 in; Maximum Cutting Radius (Decimal Inch): 0.1250 in; Insert Cutting Radius (Decimal Inch): 0.1250 in; Shank D
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2008; Drill Diameter (mm): 30.50; Maximum Drill Depth (mm): 155.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Torque Screwdriver: 0.9 to 1.5 N ™m Torque 1/4″ Drive
• Replaceable Tip Drill: 0.591 to 0.626'' Drill Dia, 1.91″ Max Depth, 0.75'' Flatted Shank Uses H3P Inserts, 4.97″ OAL, Through Coolant
• Indexable Grooving Toolholder: TTEL15.9-32-2SH-TB, 0.0670″ Max Groove Width 0.6700″ Max Depth, Uses TD 2 & TS 2 Inserts, 0.6250″ Shank Height, 5/8″ Shank Width, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2205; Drill Diameter (mm): 31.00; Maximum Drill Depth (mm): 155.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Torque Screwdriver: 0.3 to 1 N ™m Torque 1/4″ Drive
• Modular Turning & Profiling Cutting Unit Heads; Cutting Direction: Left Hand; Compatible Insert Style: VB..; Compatible Insert Size Code: 21.5; Insert Holding Method: Screw; Series: SVJB; Cutting Tool Application: Facing; Turning
• Indexable Grooving Toolholder: TTEL15.9-32-3SH-TB, 0.0950″ Max Groove Width 0.6700″ Max Depth, Uses TD 3 & TS 3 Inserts, 0.6250″ Shank Height, 5/8″ Shank Width, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.2992; Drill Diameter (mm): 33.00; Maximum Drill Depth (mm): 165.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Right Hand 3/8″ Shank Height, 3/8″ Shank Width, Uses GCMN Inserts, Series GND
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 48.47 mm Max Depth, 20 mm Flatted Shank Uses H3P Inserts, 126.16 mm OAL, Through Coolant
• ER: ER32
• End Mill Holder: CAT40 Taper Shank, 5/16″ Hole 6″ Projection, 0.78″ Nose Dia, Through Coolant
• FS Formula 4090 Heavy Duty, High Foaming, Chlorinated Detergent
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3750; Drill Diameter (Inch): 1-3/8; Maximum Drill Depth (Decimal Inch): 5.5120; Shank Type: Weldon; Shank Diameter (Inch): 1-1/2; Drill Diameter Range (Decimal Inch): 1.3000 to 1
• Indexable Grooving Toolholder: TTER15.9-32-2SH-TB, 0.0670″ Max Groove Width 0.6700″ Max Depth, Uses TD 2 & TS 2 Inserts, 0.6250″ Shank Height, 5/8″ Shank Width, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3120; Drill Diameter (Inch): 1-5/16; Maximum Drill Depth (Decimal Inch): 5.3540; Shank Type: Weldon; Shank Diameter (Inch): 1-1/2; Drill Diameter Range (Decimal Inch): 1.3000 to
• Indexable Grooving Toolholder: TTER15.9-32-3SH-TB, 0.0950″ Max Groove Width 0.6700″ Max Depth, Uses TD 3 & TS 3 Inserts, 0.6250″ Shank Height, 5/8″ Shank Width, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3280; Drill Diameter (Inch): 1-21/64; Maximum Drill Depth (Decimal Inch): 5.3540; Shank Type: Weldon; Shank Diameter (Inch): 1-1/2; Drill Diameter Range (Decimal Inch): 1.3000 to
• Replaceable Drill Tips; Maximum Drill Diameter (mm): 32.50; Point Angle: 140; Tip Material: Solid Carbide; Manufacturer Grade: IC908; Cutting Direction: Right Hand; Series: FCP; Coating Process: PVD; Insert Seat Size: 32; Functional Length (mm): 12.30; Pr
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (Inch): 1-7/16; Maximum Drill Depth (Decimal Inch): 5.8270; Shank Type: Weldon; Shank Diameter (Inch): 1-1/2; Drill Diameter Range (Decimal Inch): 1.3000 to
• Modular Boring Head: Right Hand, Size A42 Uses CCMT 32.5 Inserts, Series PinzBOHR, Steel
• Boring & Grooving Bar Holders; Inside Diameter (mm): 6.00; Outside Diameter: 50.00; Overall Length (mm): 60.00; Head Diameter (mm): 19.00; Shank Length (Inch): 2; Overall Length: 60.0 mm
• Boring & Grooving Bar Holders; Inside Diameter (mm): 6.00; Outside Diameter: 50.00; Overall Length (mm): 60.00; Head Diameter (mm): 17.70; Shank Length (Inch): 2; Overall Length: 60.0 mm
• Indexable Ball Nose End Mills; Milling Diameter: 1.5000 in; Maximum Depth Of Cut: 2.1000 in; Shank Diameter: 1.5000 in; Shank Type: Weldon Flat; Compatible Insert Style: NDET; Compatible Insert Size Code: 3807; Toolholder Style: 2BW3Z; Series: 2BW3Z; Over
• Inductive DRO Scale: 30″ Max Measuring Range, 0.0002 & 0.0005″ Resolution, 37.4″ Scale Length IP67, 11.48″ Cable Length
• Speed Reducer: 2 hp Max Input
• Speed Reducer: 2 hp Max Input
• 32 Gal Rectangle Brownstone Trash Can Polyethylene
• 32 Gal Rectangle Blackstone Trash Can Polyethylene
• 32 Gal Rectangle Graystone Trash Can Polyethylene
• Hex Head Cap Screw: 1-1/2 6 x 5″, Grade L9 Steel, Zinc Yellow Dichromate Finish - Partially Threaded
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Standard Shank Uses 5 LOMU Inserts, 0.0984″ Max Depth, 5.15″ OAL, Through Coolant
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Long Shank Uses 4 LOMU Inserts, 0.0984″ Max Depth, 8″ OAL, Through Coolant
• Mounted Bearings & Pillow Blocks; Bearing Insert Type: Wide Inner Ring; Bolt Hole (Center-to-center): 102 mm; Housing Material: Thermoplastic; Lock Type: Set Screw; Static Load Capacity: 3300.00; Number Of Bolts: 4; Maximum RPM: 3750.000; Series: UCFPL; I
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.8850 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.3060 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 1906; Maximum Ramping Angle: 2.1 ™; Series: 5M6M; Cutt
• Indexable High-Feed Face Mill: 2.755 to 4″ Cut Dia, 1.5″ Arbor Hole Takes (6) 1906 Inserts, Through Coolant
• Taper Length Drill Bit: 0.4531″ Dia, 143 ° AlTiN Finish, 4.57″ Flute Length, 6.48″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Speed Reducer: 2 hp Max Input
• Taper Length Drill Bit: 0.4375″ Dia, 143 ° AlTiN Finish, 4.02″ Flute Length, 5.81″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Taper Length Drill Bit: 0.4219″ Dia, 143 ° AlTiN Finish, 4.02″ Flute Length, 5.81″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Taper Length Drill Bit: 0.4063″ Dia, 143 ° AlTiN Finish, 4.02″ Flute Length, 5.81″ OAL, RH Cut, Helical Flute, Straight Shank, Series K256
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Independent Manual Lathe Chuck: 4-Jaw, 6″ Dia Includes Back Plate
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Wet & Dry Cut Saw Blade: 9″ Dia, 7/8 & 5/8″ Arbor Hole, 0.09″ Kerf Width, 16 Teeth High Speed Steel Teeth, Use on Masonry, Standard Arbor
• Drilling Head Accessories; Type: Guide Pad; For Use With: Drill Head; System Compatibility: BTA Drills; Minimum Drill Size: 1.7720 in; Maximum Drill Size: 2.3650 in; For Use With: Drill Head; Accessory Type: Guide Pad
• Welded Bandsaw Blade: 12' 6″ Long, 1/2″ Wide, 0.025″ Thick, 6 to 10 TPI Bi-Metal, Toothed Edge
• Plastic Rod: Garolite (G-10), 4' Long, 5/8″ Dia, Yellow Rockwell M-110
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Pneumatic Button; Pushbutton Shape: Rectangle; Pushbutton Color: Blue; Operator Illumination: Illuminated; Amperage (mA): 10; Voltage: 240; Contact Form: 1NO/1NC; Standards Met: ADA Compliant
• Welded Bandsaw Blade: 9' 8″ Long, 1″ Wide, 0.035″ Thick, 5 to 7 TPI Bi-Metal, Toothed Edge
• 36 x 36 x 1/8″ White Pressed Wool Felt Sheet Plain Backing, 500 psi Tensile Strength, 2 Lb/Sq Yd, SAE Grade F-1
• Welded Bandsaw Blade: 9' 11″ Long, 1″ Wide, 0.035″ Thick, 8 to 11 TPI Bi-Metal, Toothed Edge
• 120 Grit Aluminum Oxide Rectangular Polishing Stone Fine Grade, 1/2″ Wide x 6″ Long x 1/4″ Thick, Oil Filled
• 7-1/4″ 36V Cordless Circular Saw 6,000 RPM, 5/8″ Arbor, 2-3/8″ Depth at 90°, 1-11/16″ Depth at 45°, Right Blade, Lithium-Ion Battery Not Included
• Indexable Grooving Toolholder: SIGIVR2021, Internal Right Hand, 0.1772″ Max Depth, 1-1/4″ Shank Width, No
• Welded Bandsaw Blade: 10' Long, 1″ Wide, 0.035″ Thick, 5 to 7 TPI Bi-Metal, Toothed Edge
• Welded Bandsaw Blade: 10' Long, 1″ Wide, 0.035″ Thick, 8 to 11 TPI Bi-Metal, Toothed Edge
• Die Drill Bit: 0.3680″ Dia, 140 °, Solid Carbide Bright Finish, 1-13/16″ Flute, 3-1/8″ OAL, Series 470
• 1 Axis, Milling, Lathe & Grinding Compatible DRO Counter Color TFT Display
• Replaceable Tip Drill: 24 to 24.99 mm Drill Dia, 300 mm Max Depth, 25 mm Flange Shank Seat Size 24, 391 mm OAL, Through Coolant
• Polyurethane Tube: 100' Long 150 Max psi, -40 to 165 ° F, Blue
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 45' Long x 25' Wide, 16 mil Polyethylene, Rectangle
• Replaceable Tip Drill: 23 to 23.99 mm Drill Dia, 288 mm Max Depth, 25 mm Flange Shank Seat Size 23, 378 mm OAL, Through Coolant
• Hex Head Cap Screw: 3/8-16 x 1-1/2″, Grade L9 Steel, Zinc Yellow Dichromate Finish Partially Threaded
• Helical Flute Thread Mill: 1/2-14, Internal & External, 4 Flute, 1/2″ Shank Dia, Solid Carbide 14 TPI, 0.47″ Cut Dia, 1.143″ LOC, TiAlN Coated
• Taper Length Drill Bit: 0.2992″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.315″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 3.1590 in; Maximum Cutting Diameter: 4.0000 in; Maximum Depth Of Cut: 0.0900 in; Arbor Hole Diameter (mm): 1.50; Compatible Insert Size Code: 324; Maximum Ramping Angle: 0.2 ™; Series: EG6J; Cutte
• Helical Flute Thread Mill: 1/2-14, Internal & External, 4 Flute, 1/2″ Shank Dia, Solid Carbide 14 TPI, 0.47″ Cut Dia, 0.785″ LOC, TiAlN Coated
• Helical Flute Thread Mill: 1/4-28, Internal, 4 Flute, Solid Carbide 28 TPI, 0.2008″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Sheet Gasketing; Width (Inch): 2; Thickness: 1/16; Length (Feet): 100; Length (Inch): 1200.0000; Color: White; Material: Fiberglass Fabric; Minimum Temperature (F): 0.000; Material: Fiberglass Fabric; Maximum Temperature (F): 1000.000; Color: White; Maxim
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 0.63″ Modular Shank Uses 3 SPKT Inserts, 1.1″ Max Depth, 1.38″ OAL, Through Coolant
• Helical Flute Thread Mill: 3/8-16 & 3/4-16, Internal, 4 Flute, Solid Carbide 16 TPI, 0.2717″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Indexable High-Feed Face Mills; Cutting Diameter (mm): 17.6; Cutting Diameter (Decimal Inch): 0.692913; Maximum Depth of Cut (mm): 0.8; Maximum Depth of Cut (Decimal Inch): 0.0315; Shank Diameter (mm): 17.6; Series: CoroMill MH20; Cutter Style: MH20-AR..O
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.2402″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Toilet Seats; Type: Luxury w/ Cover and Slow Close; Style: Elongated; Material: Plastic; Color: White; Outside Width: 15; Inside Width: 0; Length (Inch): 18.675; Minimum Order Quantity: Plastic; Material: Plastic
• Helical Flute Thread Mill: 5/16-18 & 9/16-18, Internal, 4 Flute, Solid Carbide 18 TPI, 0.2421″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Helical Flute Thread Mill: 5/16-24 & 3/8-24, Internal, 4 Flute, Solid Carbide 24 TPI, 0.2638″ Cut Dia, TiCN Coated
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Taper Length Drill Bit: 0.3740″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Cylindrical Shank, Series 390
• Toilet Seats; Type: Luxury Closed Front w/o Cover and Slow Close; Style: Elongated; Material: Plastic; Color: Black; Outside Width: 15; Inside Width: 0; Length (Inch): 18.675; Minimum Order Quantity: Plastic; Material: Plastic
• Indexable Grooving/Cut-Off Toolholders; Internal or External: External; Cutting Direction: Left Hand; Maximum Depth of Cut (mm): 12.00; Hand of Holder: Left Hand; Minimum Groove Width (mm): 3.00; Toolholder Style: EVSB; Insert Compatibility: EG0300M03P02;
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Indexable Grooving/Cut-Off Toolholders; Internal or External: External; Cutting Direction: Right Hand; Maximum Depth of Cut (mm): 12.00; Hand of Holder: Right Hand; Minimum Groove Width (mm): 3.00; Toolholder Style: EVSB; Insert Compatibility: EG0300M03P0
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Metering Pump Accessories; Type: Seal Kit; For Use With: CRP1000V800CRTG; Length (Decimal Inch): 7.0000; For Use With: CRP1000V800CRTG
• Plastic Sheet: Acetal, 5/8″ Thick, White Rockwell M-90
• 3.4mm Minor 4.6mm Major 11mm Step Length 147° High Performance Solid Carbide Subland Step Drill Bit TiAlSiN & TiSiN Finish, 74mm OAL, Series CoroDrill 860
• Dispenser Settings Micro - Black
• Cable Tools & Kits; Number of Pieces: 2.0; Number Of Pieces: 2.0; For Use With: MS-6
• 4.25mm Minor 5.7mm Major 14mm Step Length 147° High Performance Solid Carbide Subland Step Drill Bit TiAlSiN & TiSiN Finish, 74mm OAL, Series CoroDrill 860
• Replaceable Tip Drill: 22 to 22.99 mm Drill Dia, 69 mm Max Depth, 25 mm Straight-Cylindrical Shank Seat Size 22, 158 mm OAL, Through Coolant