Products

• Indexable Insert Drills; Drill Style: MCTR; Maximum Drill Diameter (mm): 15.00; Maximum Drill Depth (mm): 562.00; Shank Type: Flatted; Shank Diameter (Inch): 25; Shank Diameter (mm): 25.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximu
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 5/8; Drill Diameter (Decimal Inch): 0.6250; Maximum Drill Diameter (Decimal Inch): 0.6250; Drill Diameter (Inch): 5/8; Maximum Drill Depth (Decimal Inch): 9.5300; Maximum Drill Depth
• Drilling Chamfer Rings; Series: DRV; Inside Diameter (Decimal Inch): 0.6378 in; Inside Diameter (mm): 16.2 mm; Overall Diameter (Decimal Inch): 1.8504; Overall Diameter (mm): 47; Overall Length (mm): 30 mm; Overall Length (Decimal Inch): 1.1811 in; Insert
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 16.00; Drill Diameter (Decimal Inch): 0.6299; Maximum Drill Diameter (Decimal Inch): 0.6299; Drill Diameter (mm): 16.00; Maximum Drill Depth (Decimal Inch): 10.1260; Maximum Drill Dept
• Traffic Barricades; Barricade Type: Barricade Rail; Material: Plastic; Steel; Reflective Bands: Yes; Overall Length: 11.00; Overall Height: 32; Top Panel Height: 32; Top Panel Width: 10; Reflective: Yes; Bottom Panel Height: 10; Bottom Panel Width: 11; St
• Corner Chamfer End Mill: 16.00 mm Dia, 32.00 mm LOC, 2 Flute, 0.18 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.1811; Drill Diameter (mm): 30.00; Maximum Drill Depth (mm): 90.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 17.00; Drill Diameter (Decimal Inch): 0.6693; Maximum Drill Diameter (Decimal Inch): 0.6693; Drill Diameter (mm): 17.00; Maximum Drill Depth (Decimal Inch): 10.7165; Maximum Drill Dept
• Closed Cell Buna-N Foam: 12″ Wide, 24″ Long, Black Plain Backing
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2205; Drill Diameter (mm): 31.00; Maximum Drill Depth (mm): 93.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 16.50; Drill Diameter (Decimal Inch): 0.6496; Maximum Drill Diameter (Decimal Inch): 0.6496; Drill Diameter (mm): 16.50; Maximum Drill Depth (Decimal Inch): 10.1260; Maximum Drill Dept
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.3780; Drill Diameter (mm): 35.00; Maximum Drill Depth (mm): 105.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.0236; Drill Diameter (mm): 26.00; Maximum Drill Depth (mm): 78.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Plastic Sheet: Polytetrafluoroethylene, 3/16″ Thick, White, 3,500 psi Tensile Strength Shore D-55
• Black Reducing Coupling: 1-1/4 x 1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.1417; Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 87.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 11/16; Drill Diameter (Decimal Inch): 0.6870; Maximum Drill Diameter (Decimal Inch): 0.6870; Drill Diameter (Inch): 11/16; Maximum Drill Depth (Decimal Inch): 10.7200; Maximum Drill
• Helical Flute Thread Mill: 5/16-18, Internal, 4 Flute, Solid Carbide 18 TPI, 0.1535″ Cut Dia, 2.913″ OAL, TiAlN-T46 Coated
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.3386; Drill Diameter (mm): 34.00; Maximum Drill Depth (mm): 102.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Tire Chains; For Use With: 11R22.5; 275/80R24.5; 295/75R22.5; 285/70R22.5; 305/70R22.5; 285/70R24.5; 275/75R22.5; 295/70R22.5; Axle Type: Dual Axle
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2598; Drill Diameter (mm): 32.00; Maximum Drill Depth (mm): 96.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Tire Chains; For Use With: 11R22.5; 275/80R24.5; 295/75R22.5; 285/70R22.5; 305/70R22.5; 285/70R24.5; 275/75R22.5; 295/70R22.5; Axle Type: Dual Axle
• Indexable Grooving Toolholder: KGBFL1616JX16F, External Left Hand, No
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.0630; Drill Diameter (mm): 27.00; Maximum Drill Depth (mm): 81.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Grooving Tools; Grooving Tool Type: Micro Internal; Minimum Hole Diameter (mm): 10.00; Groove Width (mm): 1.00; Shank Diameter (mm): 10.0000; Overall Length (mm): 10.0000; Material Grade: Submicron; Maximum Hole Depth (mm): 10.00; Projection (mm): 1.900;
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.2992; Drill Diameter (mm): 33.00; Maximum Drill Depth (mm): 99.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Sheet: Silicone Rubber, 12″ Wide, 18″ Long, Clear Durometer 50 to 60
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 108.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Industrial & Laundry Faucets; Type: Wall Mount Faucet; Style: Wall Mount; Design: Wall Mount; Handle Type: Lever; Spout Type: Swing Spout/Nozzle; Mounting Centers: 4; Spout Size: 8; Finish/Coating: Chrome Plated Satin; Type: Wall Mount Faucet
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.1024; Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 84.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.2559″ Cut Dia, 2.5″ OAL, TiAlN-T46 Coated
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9843; Drill Diameter (mm): 25.00; Maximum Drill Depth (mm): 75.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Strip: Buna-N Rubber, 2″ Wide, 120″ Long, Black Durometer 70, Plain Backing
• Traffic Barricades; Type: Type II; Barricade Height (Inch): 42.6; Material: Plastic; Barricade Width (Inch): 24; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: White; Weight (Lb.): 13.2000; Top Panel Height (Inch): 12; Top Panel Width (Inch):
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0827; Drill Diameter (mm): 27.50; Maximum Drill Depth (mm): 112.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0630; Drill Diameter (mm): 27.00; Maximum Drill Depth (mm): 108.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1-1/2″ Thick, Black Shore D-70
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1024; Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 112.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.0433; Drill Diameter (mm): 26.50; Maximum Drill Depth (mm): 108.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 10 mm Stroke, M14 x 1.5 Thread 88 mm OAL, 9.8 lb Force
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1220; Drill Diameter (mm): 28.50; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Welding Helmet: Orange Yellow & Red, Nylon, Shade 5 to 9 & 9 to 13
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 10 mm Stroke, M14 x 1.5 Thread 88 mm OAL, 9.8 lb Force
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1811; Drill Diameter (mm): 30.00; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Grooving Tool: Face Solid Carbide, 3/16″ Shank Dia, 0.039″ Groove Width
• Air Cylinder Accessories; Type: Clevis Rod; Accessory Type: Clevis Rod; For Use With: Cylinder; Material: Steel
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1417; Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.1614; Drill Diameter (mm): 29.50; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3
• Tape: General 2″ Wide
• Toner Cartridge: Magenta Use with Phaser 7,800
• Plastic Sheet: Acetal, 1/2″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Toner Cartridge: Cyan Use with Phaser 7,800
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Training & Safety Awareness Posters; Training Program Title: Fall Protection; Message: Fall Protection; Language: English; Height (Inch): 18; Width (Inch): 12
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide AlTiN Coated
• Corner Chamfer End Mill: 0.50 mm Dia, 1.50 mm LOC, 2 Flute, 0.02 mm Chamfer Width, Solid Carbide
• Machine Vise: 6″ Jaw Width, 6″ Jaw Opening, Horizontal, Swivel Base 2-1/8″ Jaw Height, 1 Station
• Die Drill Bit: 21/32″ Dia, 135 °, Solid Carbide Uncoated, 1-1/2″ Flute, 4″ OAL, Series 200
• Safety Bench Cans & Dip/Wash Tanks; Type: Bench Can; Capacity (pt.): 1.000; Can Material: Steel; Capacity: 1.000; Capacity (Qt.): 1.000; Color: Yellow; Capacity (Gal.): 1.000
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 18.00; Drill Diameter (Decimal Inch): 0.7087; Maximum Drill Diameter (Decimal Inch): 0.7087; Drill Diameter (mm): 18.00; Maximum Drill Depth (Decimal Inch): 7.5669; Maximum Drill Depth
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 19.00; Drill Diameter (Decimal Inch): 0.7480; Maximum Drill Diameter (Decimal Inch): 0.7480; Drill Diameter (mm): 19.00; Maximum Drill Depth (Decimal Inch): 7.9921; Maximum Drill Depth
• Corner Chamfer End Mill: 4.00 mm Dia, 8.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Black Tee: 1-1/2 x 1/2 x 1-1/2″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 23/32; Drill Diameter (Decimal Inch): 0.7180; Maximum Drill Diameter (Decimal Inch): 0.7180; Drill Diameter (Inch): 23/32; Maximum Drill Depth (Decimal Inch): 7.6000; Maximum Drill D
• Taper Length Drill Bit: 0.5938″ Dia, 118 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 667
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 47/64; Drill Diameter (Decimal Inch): 0.7340; Maximum Drill Diameter (Decimal Inch): 0.7340; Drill Diameter (Inch): 47/64; Maximum Drill Depth (Decimal Inch): 7.6000; Maximum Drill D
• Shell Reamer Right Hand Cut, 10 Flutes
• Indexable Boring Bar: S10HSWUBL0606A, 6.00 mm Min Bore, 10.00 mm Shank Dia, N/A Steel Screw, Uses WBMT121 ™, WBGT121 ™ & WBGW121 ™ Inserts
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 3/4; Drill Diameter (Decimal Inch): 0.7500; Maximum Drill Diameter (Decimal Inch): 0.7500; Drill Diameter (Inch): 3/4; Maximum Drill Depth (Decimal Inch): 7.9900; Maximum Drill Depth
• Miniature Turret Tool Holder: 1.6535″ Projection
• Roll: Silicone Rubber, 36″ Wide, White Durometer 40, Plain Backing
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Indexable Square-Shoulder End Mill: MECX0750S625074T, Cylindrical Shank Uses 4, Through Coolant,
• Corner Chamfer End Mill: 3.50 mm Dia, 5.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Plastic Rod: Acetal, 6' Long, 1-1/2″ Dia, Black Rockwell M-90
• Arc Flash Clothing Kit: Size Medium, Cotton, Coveralls & Hoods
• Arc Flash Clothing Kit: Size Small, Cotton, Coveralls & Hoods
• Replaceable Tip Drill: 12.5 to 12.99 mm Drill Dia, 104 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 080, 168 mm OAL, Through Coolant
• Handheld Power Shears; Handle Type: Pistol Grip; Handle Type: Pistol Grip; Cutting Capacity: 13; 16; 18; Speed: 4000.000; Strokes Per Minute: 4000; Amperage: 3.3000; Voltage: 110.00; Minimum Cut Radius: 1.1875; Amperage: 3.3000; Voltage: 110.00
• Miniature Turret Tool Holder: 2.5591″ Projection, Through Coolant
• Replaceable Tip Drill: 10.5 to 10.99 mm Drill Dia, 88 mm Max Depth, 12 mm Straight-Cylindrical Shank Seat Size 10.5, 149 mm OAL, Through Coolant
• Arc Flash Clothing Kit: Size Small, Cotton, Coat, Hoods & Leggings
• Replaceable Tip Drill: 11.5 to 11.99 mm Drill Dia, 96 mm Max Depth, 12 mm Straight-Cylindrical Shank Seat Size 11.5, 159 mm OAL, Through Coolant
• Spotlight/Lantern Flashlight 550 Lumens, 690 min Runtime, White LED Bulb, Black & Red Body, 1 Lithium-Ion Battery Included
• 60 Gal Square Graystone Decorative Outdoor Waste Receptacle Polyethylene
• Replaceable Tip Drill: 12 to 12.49 mm Drill Dia, 100 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 12, 163 mm OAL, Through Coolant
• Welded Bandsaw Blade: 32' 10″' Long x 2-5/8″ Wide x 0.0630″ Thick, 2-3 TPI Bi-Metal, Variable Edge, Variable Pitch
• Universal Circuit Breaker Lockout 1 Padlock Max, Polypropylene & Fiberglass Reinforced Nylon
• Replaceable Tip Drill: 13 to 13.49 mm Drill Dia, 108 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 13, 172 mm OAL, Through Coolant
• Welded Bandsaw Blade: 33'' Long x 2-5/8″ Wide x 0.0630″ Thick, 3-4 TPI Bi-Metal, Variable Edge, Variable Pitch
• Replaceable Tip Drill: 13.5 to 13.99 mm Drill Dia, 112 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 13.5, 177 mm OAL, Through Coolant
• Quick-Change Master Holders; Quick Change System: Quick Change System Blitz SBK; Taper Size: 3MT; Taper Size: 3MT; Projection (mm): 75; Projection: 75 mm; Nose Diameter: 50.0 mm; Nose Diameter (mm): 50.00; Through Coolant: None; Through Coolant: No; Tir:
• Replaceable Tip Drill: 14.5 to 14.99 mm Drill Dia, 120 mm Max Depth, 16 mm Straight-Cylindrical Shank Seat Size 14.5, 189 mm OAL, Through Coolant
• Clamps For Indexables; Type: Clamp; Clamp Style: PK; Industry Standard Number: PK254; Series: PK254
• Extra Length Drill Bit: 0.375″ Dia, High Speed Steel Bright Finish, 7.2835″ Flute Length, Parabolic Flute, Straight-Cylindrical Shank, Series 524
• 1-1/4″ Shaft Diam, 1.126″ Groove Diam, Spring Steel External C Style Retaining Ring 1.415″ Free OD, 1.11″ Free ID, 0.056″ Groove Width x 0.062″ Groove Depth, 0.05″ Ring Thickness, Grade 1060-1090
• Combination Drill & Reamers; Reamer Size (Inch): 1/4; Reamer Size (Fractional Inch): 1/4; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.2500; Series: UDM5A1AA; Tool Performance: High Per
• 13/32 x 10-15/32″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Plastic Sheet: Acetal, 1/4″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 1/2 x 10-15/32″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• 11/32 x 10-15/32″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• 3/8 x 10-15/32″ Through-Hole Lap 10% Max Expansion, Eccentric Slot
• Arc Flash Clothing Kit: Size Medium, Cotton, Coat, Hoods & Leggings
• Single Profile Thread Mill: 3/8-16 to 3/8-40, 16 to 40 TPI, Internal & External, 4 Flutes, Solid Carbide 0.3″ Cut Dia, 3/8″ Shank Dia, 2.5″ OAL, Amorphous Diamond Coated
• Roll: Polyurethane Rubber, 36″ Wide, Amber Durometer 60, Plain Backing
• Hex Head Cap Screw: 3/4-16 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Indexable High-Feed End Mill: 1/2″ Cut Dia, 0.47″ Modular Shank Uses 3 UNLU Inserts, 0.02″ Max Depth, 0.67″ OAL, Through Coolant
• Stripper: 5 gal Pail, Use On Floors Hard Floor Care
• Insert Bearings; Outside Diameter: 52 mm; Outside Diameter (Inch): 52 mm; Outside Diameter (Decimal Inch): 52 mm; Cage Material: Stainless Steel; Overall Width (Inch): 27; Width (mm): 27; Race Width: 15.0000; Bearing Bore Diameter: 1 in; Dynamic Load Capa
• Indexable Copy Face Mills; Maximum Depth Of Cut: 10.00 mm; Compatible Insert Size Code: RJL.2007; Arbor Hole Diameter (mm): 27.00; Maximum Ramping Angle: 8.5 ™; Overall Height (mm): 50.00 mm; Series: 1A7M; Number of Cutter Inserts: 5; Cutter Style: 1A7M;
• Warewash Liquid Detergent Highly Concentrated automated warewash
• All-Purpose Cleaner: 1 gal Bottle Liquid, Citrus Scent
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 0.51″ Modular Shank Uses 4 SDXS Inserts, 0.023″ Max Depth, 1″ OAL, Through Coolant
• Indexable High-Feed End Mill: 12 mm Cut Dia, 0.47 mm Cylindrical Shank Uses 3 UNLU Inserts, 0.5 mm Max Depth, 110 mm OAL, Through Coolant
• Handheld Power Shears; Type of Power: Cordless; Handle Type: Ergonomic D-Handle; Handle Type: Ergonomic D-Handle; Cutting Capacity: 16 Gauge (Stainless Steel); 14 Gauge (Mild Steel); 12 Gauge (Aluminum); Strokes per Minute: 0-3000; Speed (RPM): Variable;
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 5/8″ Weldon Flat Shank Uses 4 SDXS Inserts, 0.023″ Max Depth, 3.41″ OAL, Through Coolant
• Closed Cell Neoprene Foam: 36″ Wide, Black Plain Backing
• Indexable High-Feed End Mill: 3/4″ Cut Dia, 3/4″ Cylindrical Shank Uses 3 PNCU Inserts, 0.059″ Max Depth, 6″ OAL, Through Coolant
• 18V, 11/16″ Chuck, Cordless Rotary Hammer Kit SDS Plus Chuck, Reversible
• Black Reducing Coupling: 2 x 1″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Indexable High-Feed End Mill: 12 mm Cut Dia, 0.43 mm Modular Shank Uses 3 UNLU Inserts, 0.5 mm Max Depth, 17 mm OAL, Through Coolant
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• Indexable Threading Toolholder: Right Hand, 1.25 x 1.25″ Shank Series Laydown Threading
• Barrier Parts & Accessories; Type: Belt Barrier; Barrier Type: Wall-Mount Retractable Belt Barrier; Color: Black; Height (Inch): 5.5 in; Height (Decimal Inch): 5.5 in; 5.500000; Length (Inch): 120; Width (Inch): 3.5; Overall Height: 5.5 in; Type: Wall-Mou
• Die Drill Bit: 135 °, Solid Carbide Bright/Polished Finish, Series CoroDrill 400
• Helical Flute Thread Mill: 7/8-14, Internal & External, 5 Flute, 5/8″ Shank Dia, Solid Carbide 14 TPI, 0.539″ Cut Dia, 1.928″ LOC, EgiAs Coated
• Plastic Sheet: Acetal, 1-3/4″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• 5C Collet: Step Steel
• Indexable High-Feed End Mill: 1/2″ Cut Dia, 1/2″ Cylindrical Shank Uses 3 UNLU Inserts, 0.02″ Max Depth, 4-1/2″ OAL, Through Coolant
• 22mm Cut Diam, 10mm Max Depth, 20mm Shank Diam, 110mm OAL, Indexable Square-Shoulder End Mill
• Indexable Boring Bar: A08M-SWLNR-2.2, 93.00&deg N/A Steel 6.0000″ OAL, Screw,
• End Mill Holder: HSK100A Taper Shank, 2″ Hole 6″ Projection, 3-3/4″ Nose Dia, Through Coolant
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 2-1/2″ Thick, Black Shore D-70
• Live Center: Morse Taper Shank 418 lb Workpiece Weight, 7,000 Max RPM, Extended Point
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 2-1/2″ Thick, White
• Arc Flash Clothing Kit: Size Medium, Cotton, Coat, Hoods & Leggings
• Rain & Chemical Resistant Isolation Gown: Universal, Blue, Polyethylene Ties Closure
• Pack of (2), Lockout Accessory Mounting Rails 7 Padlocks Max, Fiberglass Reinforced Nylon
• Collet Chuck: ER Collet, Taper Shank 120 mm Projection, Through Coolant
• Cordless Earth Augers; Maximum Hole Depth (Inch): 41; Maximum Hole Diameter (Inch): 8; Overall Length (Inch): 34; Battery Voltage: 40.00; Battery Included: Bare Tool; RPM: 1500.000; Number of Speeds: 2; Battery Chemistry: Lithium Ion; Includes: GGD01ZEart
• Arc Flash Clothing Kit: Size Small, Cotton, Coat, Hoods & Leggings
• 90 Qty 1 Pack Plastic Round Tube [DELETE]
• Collet Chuck: ER Collet, Taper Shank 70 mm Projection, Through Coolant
• Tire Chains; For Use With: 385/95R24; 14R24; 375/90R22.5; Axle Type: Single Axle
• Collet Chuck: ER Collet, Taper Shank 120 mm Projection, Through Coolant
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Flush; Pushbutton Shape: Square; Pushbutton Color: Blue; Operator Illumination: NonIlluminated; Operation Type: Momentary (MO); Amperage (mA): 10; Voltage: 12-24; Contact Form: SPDT; Amperage
• Bowl Clip
• Tire Chains; For Use With: 385/95R24; 14R24; 375/90R22.5; Axle Type: Single Axle
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Right Hand; Maximum Depth of Cut (Decimal Inch): 0.1970; Maximum Groove Width (Decimal Inch): 0.1670; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4511; Tool Material: Steel; In
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Key Switches; Switch Type: Flush Mount; Switch Sequence: On-Off; Contact Form: DPDT; Actuator Type: Switch; Key; Terminal Type: Spring; Voltage: 12; 24; 30; Material: Stainless Steel
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Right Hand; Maximum Depth of Cut (Decimal Inch): 0.3940; Maximum Groove Width (Decimal Inch): 0.1080; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4011; Tool Material: Steel; In
• 18V, 11/16″ Chuck, Cordless Rotary Hammer SDS Plus Chuck, Reversible
• Power Saw Accessories; Accessory Type: Guide Rail Non-Slip Replacement Strip; For Use With: Makita Track saw guide; Material: Rubber
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Right Hand; Maximum Depth of Cut (Decimal Inch): 0.1970; Maximum Groove Width (Decimal Inch): 0.1670; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4521; Tool Material: Steel; In
• Arc Flash Clothing Kit: Size Large, Cotton, Coveralls & Hoods
• Arc Flash Clothing Kit: Size Large, Cotton, Bib Overalls, Hoods & Jacket
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.1970; Maximum Groove Width (Decimal Inch): 0.2360; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4511; Tool Material: Steel; Ins
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Masking Tape: 1490 mm Wide, 55 m Long, 6.3 mil Thick, Yellow Crepe Paper, Rubber Adhesive, 22 lb/in Tensile Strength
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Right Hand; Maximum Depth of Cut (Decimal Inch): 0.1970; Maximum Groove Width (Decimal Inch): 0.1670; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4511; Tool Material: Steel; In
• Traffic Barricades; Type: Type I; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: Orange; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch): 24
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Grooving/Cut-Off Toolholders; Cutting Direction: Left Hand; Maximum Depth of Cut (Decimal Inch): 0.1970; Maximum Groove Width (Decimal Inch): 0.1670; Minimum Groove Width (Decimal Inch): 0.0790; Toolholder Style: G4521; Tool Material: Steel; Ins
• Traffic Barricades; Type: Type I; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: Yellow; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch): 24
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Shell Mill Holder: CTT50, CAT50, Dual Contact Taper Shank, 1.5″ Pilot
• Traffic Barricades; Type: Type I; Barricade Height (Inch): 45; Material: Plastic; Barricade Width (Inch): 25; Reflective: Yes; Compliance: MASH Compliant; MUTCD; Color: White; Weight (Lb.): 16.0000; Top Panel Height (Inch): 12; Top Panel Width (Inch): 24
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0700; Maximum Bore Depth (Decimal Inch): 1/4; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inc
• Pole tool Provide safe and easy installation os Sammys, threaded rod, pencil rod, ceiling screws, jack chain, wire and screws. Ideal for rerofit and hard to reach projects in wood and steel.
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Powdered Metal High Speed Steel, AlCrN Finish Series TC430
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.1700 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 1.25; Compatible Insert Size Code: 1305; Maximum Ramping Angle: 1.2 ™; Series: 5M5P; Cutt
• Indexable Cutoff Toolholder: 4.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Boring Bar: A08M-SCLNR-2.2, 95.00&deg N/A Steel 6.0000″ OAL, Screw,
• Guide Posts; Attachment Method: Demountable; Outside Diameter (Inch): 2 in; Thread Size: 3/8-16 in; Thread Size: 3/8-16 in; Thread Size: 3/8-16 in; Collar Diameter: 2-1/2; Head Length: 1-15/16; Length Under Head: 11.0000; Number of Clamps: 4.000; No Descr
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Indexable Grooving Toolholder: TTSER12.7-2T7, 0.0630″ Max Groove Width 0.2750″ Max Depth, Uses TDI 2, SC*T 2 & TSL 2 Inserts, 0.5000″ Shank Height, 1/2″ Shank Width, No
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.1700 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1305; Maximum Ramping Angle: 1.2 ™; Series: 5M5P; Cutt
• Duct Hose: Thermoplastic Rubber, 4-1/2″ ID, 8 psi 25' Long, -65 to 275 ° F, Black
• Modular Tool Holding System Adapter: C4 Taper 49 mm Projection, Through Coolant
• Indexable Boring Bar: A08M-SWLNL-2.2, 93.00&deg N/A Steel 6.0000″ OAL, Screw,
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Acrylic Adhesive Backing
• Collet Chuck: ER Collet, Taper Shank Through Coolant
• Lathe Chuck Accessories; Accessory Type: Plunger Nut; Product Compatibility: MH-210 Chuck; Number Of Pieces: 1
• Stripper: 5 gal Pail, Use On Floor Surfaces
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Kyocera MFSN 88080R9TG Inch Bore Diameter, Extra Fine Pitch, 9 Flute, 88 Degree Face Mill with a 80.00mm Cutting Diameter for Facing Applications
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 1/4; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inc
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: RNG43; Toolholder Style: CRDNN; Rake: Negative; Multi-use Tool: No; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 0.7500; Shank Width (Inch): 3/4; Shank He
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 1; Minimum Cutting Diameter (Decimal Inch): 1.0000; Maximum Cutting Diameter (Decimal Inch): 1.5600; Lead Angle: 48; Maximum Depth of Cut (Decimal Inch): 0.3100; Compatible Insert Size
• Conduit Connector: For UF Cable, Die Cast Zinc, 1-1/2″ Trade Size Non-Insulated, Straight Connector, Threaded Connection
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: RN..43; Toolholder Style: CRGNR; Rake: Negative; Multi-use Tool: No; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 0.7500; Shank Width (Inch): 3/4; Shan
• Kyocera MFSN 88080R9TMG Metric Bore Diameter, Extra Fine Pitch, 9 Flute, 88 Degree Face Mill with a 80.00mm Cutting Diameter for Facing Applications
• End Mill Holder: HSK63A Taper Shank, 5/8″ Hole 6″ Projection, 1.63″ Nose Dia, Through Coolant
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Indexable Turning Toolholders; Cutting Direction: Neutral; Compatible Insert Size Code: RN..43; Toolholder Style: CRDNN; Rake: Negative; Multi-use Tool: No; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.0000; Shank Width (Inch): 1; Shank Hei
• Kyocera MFPN 66080R9TMG Metric Bore Diameter, Extra Fine Pitch, 9 Flute, 66 Degree Face Mill with a 80.00mm Cutting Diameter for Facing Applications
• End Mill Holder: HSK63A Taper Shank, 1/2″ Hole 6″ Projection, 1.38″ Nose Dia, Through Coolant
• 3-Piece Manual Ball Valve: 1-1/4″ Pipe, Full Port, Stainless Steel 2-Way Flow & In-Line, Female NPT, 1,000 psi WOG
• Indexable Boring Bar: A08M-SDUNR-2.2, 93.00&deg N/A Steel 6.0000″ OAL, Screw,
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1000; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.5780; Drill Diameter (mm): 14.68; Maximum Drill Depth (Decimal Inch): 1.1560; Maximum Drill Depth (mm): 29.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Calibration Gas & Equipment; Type: Calibration Gas; Gas Contents: 100ppm Balance Nitrogen; Gas Contents: 100ppm Balance Nitrogen; Cylinder Capacity: 100.0 L; Volume Capacity (L): 100.0 L; Detector Trade Name: RP; Background Gas: Nitrogen; Background Gas:
• Indexable Boring Bar: A08M-SDUNL-2.2, 93.00&deg N/A Steel 6.0000″ OAL, Screw,
• Arc Flash Clothing Kit: Size Medium, Cotton, Coat, Hoods & Leggings
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.6250; Drill Diameter (mm): 15.88; Maximum Drill Depth (Decimal Inch): 1.2500; Maximum Drill Depth (mm): 32.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Indexable Boring Bar: A08M-SCLNL-2.2, 95.00&deg N/A Steel 6.0000″ OAL, Screw,
• Indexable Drill Body: Flange Shank 44.45 mm Max Drill, Series V47
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Helical Flute Thread Mill: 5/16-18, Internal & External, 3 Flute, 1/4″ Shank Dia, Solid Carbide 18 TPI, 0.236″ Cut Dia, 0.1667″ LOC, 2.5″ OAL, AlTiN Nano Coated
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.5940; Drill Diameter (mm): 15.09; Maximum Drill Depth (Decimal Inch): 1.1880; Maximum Drill Depth (mm): 30.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Indexable Drill Body: Flange Shank 50.8 mm Max Drill, Series V47
• Shrink-Fit Tool Holder & Adapter: 1″ Shank Dia, Straight Shank, 0.375″ Hole Dia 0.49″ Nose Dia, 2.36″ Clamp Depth, Through Coolant
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.6090; Drill Diameter (mm): 15.47; Maximum Drill Depth (Decimal Inch): 1.2180; Maximum Drill Depth (mm): 31.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1100; Maximum Bore Depth (Decimal Inch): 0.4000; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Plastic Sheet: Acetal, 1-1/4″ Thick, Black Rockwell M-90
• Indexable Cutoff Toolholder: 0.6″ Max Depth of Cut, 1.2″ Max Workpiece Dia, Right Hand 1/2″ Shank Height, 1/2″ Shank Width, Uses TKN1.6, TKN1.6-P, TKR1.6 & TKR1.6 Inserts, Series KTKC
• Toner Cartridge: Cyan Use with HP Laserjet Enterprise M553DN, M553N, M553X, M557Z, M577DN, M577F, MFP M577C
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.5620; Drill Diameter (mm): 14.28; Maximum Drill Depth (Decimal Inch): 1.1240; Maximum Drill Depth (mm): 29.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Indexable Boring Bar: A12MSCLPL0916AE, 16.00 mm Min Bore, 12.00 mm Shank Dia, N/A Steel Screw, Uses CPMT32 ™, CPMH32 ™, CPMB32 ™ & CPGB32 ™ Inserts
• Toner Cartridge: Magenta Use with HP Laserjet Enterprise M553DN, M553N, M553X, M557Z, M577DN, M577F, MFP M577C
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.5310; Drill Diameter (mm): 13.49; Maximum Drill Depth (Decimal Inch): 1.0620; Maximum Drill Depth (mm): 27.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1220; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inc
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 0.5470; Drill Diameter (mm): 13.89; Maximum Drill Depth (Decimal Inch): 1.0940; Maximum Drill Depth (mm): 28.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 3/4; Shan
• Boring & Grooving Bar Holders; Inside Diameter (mm): 4.00; Outside Diameter: 20.00; Overall Length (mm): 70.00; Head Diameter (Decimal Inch): 0.7100; Shank Length (Inch): 1; Overall Length: 70.0 mm
• Tire Chains; For Use With: 275/70R16; 285/70R16; 255/80R17; 265/55R17; 235/80R18; 285/70R15; 32x11.5R16.5; 235/80R17; 275/80R17; 31x11.5R16; 285/60R16; 285/60R18; 275/60R17; 285/60R17; 10R17.5; 255/65R18.5; 31/11.5R15; 33x10.5R16.5; 11R15; 255/75R15; 225/
• Replaceable Drill Tip: HT800 1-1/16″, 1.0630″/ 27.00 mm Dia, N/A Seat Size 26, Nano-FIREX Finish, No
• Arc Flash Clothing Kit: Size 4X-Large, Cotton, Coat, Hoods & Leggings
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.2000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• Hand Sanitizer: Liquid, 1 Gal, Bottle Hand Sanitizer for Food Processing Facilities
• Tire Chains; For Use With: 275/70R16; 285/70R16; 255/80R17; 265/55R17; 235/80R18; 285/70R15; 32x11.5R16.5; 235/80R17; 275/80R17; 31x11.5R16; 285/60R16; 285/60R18; 275/60R17; 285/60R17; 10R17.5; 255/65R18.5; 31/11.5R15; 33x10.5R16.5; 11R15; 255/75R15; 225/
• Replaceable Drill Tips; Diameter (mm): 26.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 26; Height (mm): 18.50; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 60, Plain Backing
• Replaceable Drill Tips; Diameter (mm): 28.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 28; Height (mm): 19.20; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.0900; Maximum Bore Depth (Decimal Inch): 0.3000; Radius: 0.0020; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal
• M10 Screw 51mm OAL 10mm ID x 16mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 53.1 mm OD, 50 mm Stroke, M36 x 1.5 Thread 238 mm OAL, 68.6 lb Force
• M10 Screw 50mm OAL 10mm ID x 16mm OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 53.1 mm OD, 50 mm Stroke, M36 x 1.5 Thread 238 mm OAL, 68.6 lb Force
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1240; Maximum Bore Depth (Decimal Inch): 1/2; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inc
• Sheet: Buna-N Rubber, 36″ Wide, 60″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 53.1 mm OD, 50 mm Stroke, M36 x 1.5 Thread 238 mm OAL, 68.6 lb Force
• Guhring GH305.0500.500.90.04.L.IK External Left Hand Face Grooving 90 Deg Offset Thru Coolant Holder 1/2″ Square Shank
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• 6-1/2″ 18V Cordless Circular Saw 3,700 RPM, 5/8″ Arbor, 2-1/4″ Depth at 90°, 1-9/16″ Depth at 45°, Left Blade, Lithium-Ion Battery Not Included
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.1240; Maximum Bore Depth (Decimal Inch): 3/8; Radius: 0.0050; Overall Length (Decimal Inch): 1-1/2; Shank Diameter (Inch): 1/8; Projection: Projection; Finish/Coating: AlTiN; Projection (Decimal Inc
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 90, Acrylic Adhesive Backing