Products

• Roll: Silicone Rubber, 36″ Wide, White Durometer 60, Plain Backing
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.497″ OD, 0.027″ Thick
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 50, Plain Backing
• Indexable Grooving Toolholder: TTER9.5-20-2SH-TB, 0.0670″ Max Groove Width 0.4700″ Max Depth, Uses TD 2 & TS 2 Inserts, 0.3750″ Shank Height, 3/8″ Shank Width, Through Coolant
• Black Tee: 2-1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• Indexable Grooving Toolholder: TTER12.7-24-3SH-TB, 0.0950″ Max Groove Width 0.4700″ Max Depth, Uses TD 3 & TS 3 Inserts, 0.5000″ Shank Height, 1/2″ Shank Width, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.266″ OD, 0.012″ Thick
• Abrasive Belt: 8" Wide, 60" OAL, 36 Grit, Aluminum Oxide
• Indexable Grooving Toolholder: TTEL12.7-24-3SH-TB, 0.0950″ Max Groove Width 0.4700″ Max Depth, Uses TD 3 & TS 3 Inserts, 0.5000″ Shank Height, 1/2″ Shank Width, Through Coolant
• Abrasive Belt: 8" Wide, 60" OAL, 36 Grit, Aluminum Oxide
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.155″ ID, 0.371″ OD, 0.035″ Thick
• Indexable Grooving Toolholder: KGDIL2016B3, Internal Left Hand, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.15″ ID, 0.26″ OD, 0.021″ Thick
• Indexable Grooving Toolholder: KGDIL1816B2, Internal Left Hand, Through Coolant
• IDI0748SG IC908 Carbide Replaceable Tip Drill TiAlN Finish, 140° Included Angle, 0.748″ Diam, 0.335mm High, Series IDI-SG
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 173 mm OAL, 33.2 lb Force
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 0.377″ OD, 0.026″ Thick
• Cordless Tool Combination Kit: 20V
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 173 mm OAL, 33.2 lb Force
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 16.00; Maximum Drill Depth (mm): 708.20; Shank Type: Whistle Notch; Shank Diameter (mm): 25.40; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximum Drill Depth Range (
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 16.00; Maximum Drill Depth (mm): 908.20; Shank Type: Whistle Notch; Shank Diameter (mm): 25.40; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximum Drill Depth Range (
• NFPA Tie Rod Cylinders; Type: Double Acting; Bore Size (Inch): 50 mm; Rod Diameter (Decimal Inch): 20 mm; Port Size: 1/4; Rod Thread Size: 16 mm; Stroke Length: 160 mm; Body Material: Steel; Bore Size (mm): 50 mm; Stroke Length (mm): 160 mm; Rod Diameter
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0807MC
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.56″ OD, 0.035″ Thick
• Plastic Sheet: High Density Polyethylene, 1″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 16.00; Maximum Drill Depth (mm): 922.20; Shank Type: Combination; Shank Diameter (Inch): 25; Shank Diameter (mm): 25.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Ma
• Wet & Dry Cut Saw Blade: 14″ Dia, 1″ Arbor Hole, 0.125″ Kerf Width, 24 Teeth High Speed Steel Teeth, Use on Concrete, Standard Arbor
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1.13″ Modular Shank Uses 8 UNLU Inserts, 0.02″ Max Depth, 1.57″ OAL, Through Coolant
• Replaceable Drill Tips; Diameter (mm): 38.00; Tip Material: Solid Carbide; Manufacturer Grade: Carbide; Series: HT 800 WP; Insert Seat Size: 36; Height (mm): 22.70; Insert Holding Method: Screw; Coolant Through: No; Point Type: Faceted; Applications: Cons
• 2485 63/64″ 140D FIREX Carbide Replaceable Tip Drill TiN/TiAlN Finish, 140° Included Angle, 63/64″ Diam, 10mm High, Through Coolant, Series 2485
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.397″ OD, 0.028″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3583; Drill Diameter (mm): 34.50; Maximum Drill Depth (mm): 110.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable High-Feed End Mill: 1-1/2″ Cut Dia, 1-1/2″ Weldon Flat Shank Uses 3 SNGQ Inserts, 0.065″ Max Depth, 6″ OAL, Through Coolant
• Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0586MC
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4567; Drill Diameter (mm): 37.00; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable High-Feed End Mill: 32 mm Cut Dia, 1.14 mm Modular Shank Uses 8 UNLU Inserts, 0.5 mm Max Depth, 27 mm OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.315″ OD, 0.031″ Thick
• 0.63″ Max Depth, 0.079 to 1.26″ Width, External Left Hand Indexable Grooving/Cutoff Toolholder 4.331″ OAL, Uses SA 24-20\x85 Inserts, HSA Monoblock Toolholder, Through Coolant, Series SA Parting / Grooving
• 2485 57/64″ 140D FIREX Carbide Replaceable Tip Drill TiN/TiAlN Finish, 140° Included Angle, 57/64″ Diam, 10mm High, Through Coolant, Series 2485
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4567; Drill Diameter (mm): 37.00; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Shrink-Fit Tool Holder & Adapter: DIN40 Taper Shank Through Coolant
• Plastic Sheet: Polytetrafluoroethylene
• Plastic Sheet: Polypropylene, 1/2″ Thick, Semi-Clear White, 3,250 psi Tensile Strength Rockwell M-85
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3189; Drill Diameter (mm): 33.50; Maximum Drill Depth (mm): 107.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.102″ ID, 0.251″ OD, 0.021″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3386; Drill Diameter (mm): 34.00; Maximum Drill Depth (mm): 107.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable High-Feed End Mill: 16 mm Cut Dia, 0.78 mm Cylindrical Shank Uses 2 UNLU Inserts, 0.68 mm Max Depth, 100 mm OAL, Through Coolant
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.251″ OD, 0.028″ Thick
• Die Drill Bit: 1/2″ Dia, 125 °, Solid Carbide Uncoated, 9-3/4″ Flute, 12″ OAL, Series 172
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Core Bits; Drill Bit Diameter: 2 in; Maximum Drilling Depth (Inch): 13 in; Wet/Dry: Wet; Series: Clipper Paradigm; Tool Performance: General Purpose; Primary Workpiece Material: Concrete; Body Material: Alloy Steel; Cutting Edge Style: Segmented
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (mm): 116.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 0.6102″ Cylindrical Shank Uses 2 UNLU Inserts, 0.028″ Max Depth, 4″ OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.439″ OD, 0.035″ Thick
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3780; Drill Diameter (mm): 35.00; Maximum Drill Depth (mm): 110.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Boring Head Modular Connection Shank: CAT50, Threaded Mount 1.88″ Projection
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3976; Drill Diameter (mm): 35.50; Maximum Drill Depth (mm): 113.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable High-Feed End Mill: 5/8″ Cut Dia, 5/8″ Cylindrical Shank Uses 2 UNLU Inserts, 0.028″ Max Depth, 4″ OAL, Through Coolant
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3976; Drill Diameter (mm): 35.50; Maximum Drill Depth (mm): 113.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.151″ ID, 0.329″ OD, 0.027″ Thick
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 15 mm Shank Height, 15 mm Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Tool Holder & Adapter: BT40 Taper Shank Through Coolant
• Boring Head Modular Connection Shank: BT50, Threaded Mount 2.06″ Projection
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 113.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Tool Holder & Adapter: BT40 Taper Shank Through Coolant
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.38″ OD, 0.054″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 113.00; Shank Type: Modular Connection; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting Direction: Righ
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Tool Holder & Adapter: BT40 Taper Shank Through Coolant
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.2170 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.2000 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1305; Maximum Ramping Angle: 1.8 ™; Series: 5M5P; Cutt
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.441″ OD, 0.04″ Thick
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Tool Holder & Adapter: BT40 Taper Shank Through Coolant
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Shrink-Fit Tool Holder & Adapter: BT40 Taper Shank Through Coolant
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.149″ ID, 1/2″ OD, 0.056″ Thick
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 3.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Abrasive Belt: 7-1/4" Wide, 161-1/2" OAL, 180 Grit, Aluminum Oxide
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Right Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Black Tee: 6″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Indexable Cutoff Toolholder: 2.6 mm Max Depth of Cut, Left Hand 11 mm Shank Height, 11 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.9291; Drill Diameter (mm): 49.00; Maximum Drill Depth (mm): 147.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0000; Cuttin
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 140 mm OAL, 29.4 lb Force
• Abrasive Belt: 7-1/4" Wide, 161-1/2" OAL, 120 Grit, Aluminum Oxide
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.162″ ID, 0.469″ OD, 0.044″ Thick
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.9685; Drill Diameter (mm): 50.00; Maximum Drill Depth (mm): 150.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0000; Cuttin
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 140 mm OAL, 29.4 lb Force
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 140 mm OAL, 29.4 lb Force
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.19″ ID, 0.378″ OD, 0.035″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Plastic Bar: Garolite, 1/2″ Thick, Green
• DRO Linear Scale: 0.0002″ Resolution, 16.54″ Scale Length 0.0002″ Accuracy
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.279″ OD, 0.027″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.177″ ID, 0.468″ OD, 0.026″ Thick
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CP250V300CRPE; Length (Decimal Inch): 7.0000; For Use With: CP250V300CRPE
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 0.343″ OD, 0.072″ Thick
• Abrasive Belt: 7" Wide, 16-1/4" OAL, 24 Grit, Aluminum Oxide
• Portable & Backpack Vacuum Cleaners; Power Source: Battery; Filtration Type: HEPA; Vacuum Collection Type: Disposable Bag; Maximum Air Flow: 148; Tank Capacity: 11 gal
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.31″ OD, 0.027″ Thick
• Soft Lathe Chuck Jaw: Serrated 18″ OAW, 3″ OAH, 1.1811″ Between Mount Holes, 0.5512″ Fastener, Cast Aluminum
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.434″ OD, 0.026″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.312″ OD, 0.021″ Thick
• Core Bits; Drill Bit Diameter: 5 in; Maximum Drilling Depth (Inch): 13 in; Wet/Dry: Wet; Series: Clipper Paradigm; Tool Performance: General Purpose; Primary Workpiece Material: Concrete; Body Material: Alloy Steel; Cutting Edge Style: Segmented
• Indexable Insert Drills; Drill Style: DR; Drill Diameter (Decimal Inch): 1.8500; Maximum Drill Diameter (Decimal Inch): 1.8500; Maximum Drill Depth (Decimal Inch): 5.5500; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Shank Diameter (Dec
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.17″ ID, 0.501″ OD, 0.034″ Thick
• Indexable Insert Drills; Drill Style: DR; Maximum Drill Diameter (mm): 51.00; Drill Diameter (mm): 51.00; Maximum Drill Depth (mm): 152.91; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Shank Diameter (Decimal Inch): 1.5000; Number of Dr
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.751″ OD, 0.056″ Thick
• Indexable Square-Shoulder Face Mill DELETE
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.167″ ID, 0.498″ OD, 0.024″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.176″ ID, 0.511″ OD, 0.037″ Thick
• Taper Length Drill Bit: 0.5039″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Taper Length Drill Bit: 0.4941″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.373″ OD, 0.016″ Thick
• Taper Length Drill Bit: 0.4803″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Miniature Turret Tool Holder: 2.2047″ Projection
• Taper Length Drill Bit: 0.4783″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.163″ ID, 0.281″ OD, 0.007″ Thick
• Taper Length Drill Bit: 0.4844″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Taper Length Drill Bit: 0.4921″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Abrasive Belt: 6" Wide, 276" OAL, 100 Grit, Aluminum Oxide
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.092″ ID, 0.247″ OD, 0.027″ Thick
• Abrasive Belt: 6" Wide, 276" OAL, 220 Grit, Aluminum Oxide
• Taper Length Drill Bit: 0.5000″ Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL
• Abrasive Belt: 6" Wide, 276" OAL, 60 Grit, Aluminum Oxide
• Hand Cleaner: 1 gal Bottle Liquid, Orange, Citrus Scent
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 3/8″ OD, 0.026″ Thick
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.187″ ID, 0.381″ OD, 0.035″ Thick
• Wet/Dry Vacuum: Electric, 10 gal, 8 A Plastic Tank, Cord Included
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.372″ OD, 0.026″ Thick
• Kyocera S25DRV180M205, DRV Magic Drill 18.00mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Cordless Hammer Drill: 12V, 3/8″ Chuck, 25,500 BPM, 1,700 RPM Keyless Chuck, Reversible, 2
• Portable Lockout Kits; Type: Electrical Lockout Kit; Container Type: Tool Box; Number of Padlocks Included: 4; Key Type: Keyed Alike
• Kyocera S25DRV175M205, DRV Magic Drill 17.50mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.094″ ID, 0.247″ OD, 0.007″ Thick
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 90, Acrylic Adhesive Backing
• Kyocera S25DRV170M205, DRV Magic Drill 17.00mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Hex Head Cap Screw: 3/8-16 x 6-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Kyocera S25DRV160M205, DRV Magic Drill 16.00mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Condensate Drains & Accessories; Inlet Size: 0.5 in; Outlet Size: 0.5 in; Thread Type: NPT; Inlet Size: 0.5 in; Voltage: 115 V ac; Outlet Size: 0.5 in; Voltage: 115 V ac; Inlet Size: 0.5 in
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.127″ ID, 0.541″ OD, 0.026″ Thick
• Single Profile Thread Mill: 3/8-16, 16 to 16 TPI, Internal, 5 Flutes, Solid Carbide 0.303″ Cut Dia, 5/16″ Shank Dia, TiN-T21 Coated
• Kyocera S25DRV185M205, DRV Magic Drill 18.50mm Cutting Diameter, 25.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Single Profile Thread Mill: 5/16-18, 18 to 18 TPI, Internal, 4 Flutes, Solid Carbide 0.248″ Cut Dia, 5/16″ Shank Dia, TiN-T21 Coated
• All-Purpose Cleaner: 22 gal Bottle Liquid, Acidic Scent
• Single Profile Thread Mill: 5/16-24, 16 to 16 TPI, Internal, 5 Flutes, Solid Carbide 0.26″ Cut Dia, 5/16″ Shank Dia, TiN-T21 Coated
• Standard Flat Washer: Steel, Uncoated 0.061″ ID, 0.28″ OD, 0.054″ Thick
• Single Profile Thread Mill: 3/8-24, 14 to 14 TPI, Internal, 5 Flutes, Solid Carbide 0.323″ Cut Dia, 3/8″ Shank Dia, TiN-T21 Coated
• Roll: SBR Rubber, 1″ Thick, 36″ Wide, Black Durometer 75, Plain Backing
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.1610 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0900 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 324; Maximum Ramping Angle: 0.2 ™; Series: EG5J; Cutte
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.739″ OD, 0.054″ Thick
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (Inch): 1/2; Maximum Drill Diameter (Decimal Inch): 0.5000; Maximum Drill Depth (Decimal Inch): 56.5670; Shank Type: Whistle Notch; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch):
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.313″ OD, 0.026″ Thick
• Plastic Sheet: Garolite, 3/16″ Thick, Brown, 12,000 psi Tensile Strength Rockwell M-100
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (Inch): 17/32; Maximum Drill Diameter (Decimal Inch): 0.5311; Maximum Drill Depth (Decimal Inch): 56.6460; Shank Type: Whistle Notch; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch
• All-Purpose Cleaner: 5 gal Pail Liquid, Low Odor Scent
• Welded Bandsaw Blade: 15' Long, 1-1/4″ Wide, 0.042″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 1583.80; Shank Type: Combination; Shank Diameter (Inch): 20; Shank Diameter (mm): 20.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; M
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.147″ ID, 1/2″ OD, 0.027″ Thick
• Welded Bandsaw Blade: 14' 7-1/4″ Long, 1-1/4″ Wide, 0.042″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 13.00; Maximum Drill Depth (mm): 1561.80; Shank Type: Whistle Notch; Shank Diameter (mm): 25.40; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maximum Drill Depth Range
• Wet & Dry Cut Saw Blade: 12″ Dia, 1″ Arbor Hole, 0.11″ Kerf Width, 32 Teeth High Speed Steel Teeth, Use on Concrete, Standard Arbor
• Welded Bandsaw Blade: 14' 11″ Long, 1-1/4″ Wide, 0.042″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.2″ ID, 0.341″ OD, 0.043″ Thick
• Indexable Insert Drills; Drill Style: TRLG; Maximum Drill Diameter (mm): 13.00; Maximum Drill Depth (mm): 1575.80; Shank Type: Combination; Shank Diameter (Inch): 25; Shank Diameter (mm): 25.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; M
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.377″ OD, 0.035″ Thick
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Modular Reamer Heads; Head Diameter (Inch): 1.2500; Head Diameter (mm): 1.2500; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 0.5040 in; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Hand
• Lime & Scale Remover Liquid, acidic detergent
• Modular Reamer Heads; Head Diameter (Inch): 28.0000; Head Diameter (mm): 28.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Masking Tape: 2″ Wide, 60 yd Long, 6.3 mil Thick, Tan Crepe Paper, Rubber Adhesive, 27 lb/in Tensile Strength
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.874″ OD, 0.056″ Thick
• Modular Reamer Heads; Head Diameter (Inch): 32.0000; Head Diameter (mm): 32.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Welded Bandsaw Blade: 9' 1/4″ Long, 1″ Wide, 0.035″ Thick, 5 to 8 TPI Bi-Metal, Toothed Edge
• Modular Reamer Heads; Head Diameter (Inch): 31.0000; Head Diameter (mm): 31.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Replaceable Tip Drill: 21 to 21.9 mm Drill Dia, 172.55 mm Max Depth, 25 mm Flatted Shank Uses H3P Inserts, 267.3 mm OAL, Through Coolant
• Modular Reamer Heads; Head Diameter (Inch): 30.0000; Head Diameter (mm): 30.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Replaceable Tip Drill: 22 to 22.9 mm Drill Dia, 180.69 mm Max Depth, 25 mm Flatted Shank Uses H3P Inserts, 277.6 mm OAL, Through Coolant
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.747″ OD, 0.035″ Thick
• Modular Reamer Heads; Head Diameter (Inch): 29.0000; Head Diameter (mm): 29.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.096″ ID, 0.438″ OD, 0.012″ Thick
• Indexable Copy Face Mills; Maximum Depth Of Cut: 0.2500 in; Compatible Insert Size Code: RNG.1207; Arbor Hole Diameter (mm): 0.75; Maximum Ramping Angle: 0.2 ™; Overall Height (mm): 1.5700 in; Series: DW1H; Number of Cutter Inserts: 3; Cutter Style: DW1H
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.498″ OD, 0.013″ Thick
• Modular Threading Cutting Unit Heads; System Size: C4; Series Name: C_-SIR/L; Thread Type: Internal; Cutting Direction: Right; Compatible Insert Style: IR; Compatible Insert Size Code: 16; Center To Cutting Edge: 23.50 mm; Head Length/Projection (Decimal
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.437″ OD, 0.056″ Thick
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Flexible Coupling: Steel, 1-11/16″ Pipe, 3″ OAL
• Flexible Coupling: Steel, 1-1/2″ Pipe, 3″ OAL
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.385″ OD, 0.021″ Thick
• Modular Reamer Heads; Head Diameter (Inch): 27.0000; Head Diameter (mm): 27.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Boring Cartridge
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.157″ ID, 0.247″ OD, 0.013″ Thick
• On & Off Liquid Oven & Grill Cleaner Heavy Duty Oven and Grill Cleaner
• Boring Cartridge
• Stanchion: 40″ High, Dome Base
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.282″ OD, 0.026″ Thick
• Modular Reamer Heads; Head Diameter (Inch): 26.0000; Head Diameter (mm): 26.0000; Reamer Finish/Coating: Coated; TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 12.80 mm; Hole Tolerance: h7; Spiral Direction: Neutral; Cutting Direction: Right Han
• Laundry Detergent; Form: Liquid; Container Type: Bottle; Container Size (oz.): 50; Container Size: 50; Harshness: Moderate; Features: Plant-Derived Surfactants; Natural Ingredients; Scent: Geranium Blossom & Vanilla
• Indexable Spade Drill: 32 to 35 mm Dia, 105 mm Max Depth, Straight Flute 32 mm Shank Dia, Flanged Shank, 231.3 mm OAL
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.169″ ID, 0.61″ OD, 0.026″ Thick
• Indexable Spade Drill: 32 to 35 mm Dia, 105 mm Max Depth, Straight Flute 32 mm Shank Dia, Flanged Shank, 231.3 mm OAL
• Taper Shank Drill Bit: 0.7656″ Dia, 2MT, 130 °, High Speed Steel Oxide Finish, 10.2362″ Flute Length, 15.1575″ OAL, Cone Relief Point, Parabolic Flute
• Welded Bandsaw Blade: 15' Long, 1-1/2″ Wide, 0.05″ Thick, 3 to 4 TPI Carbide Tipped, Toothed Edge
• End Mill Holder: No Straight Shank, 1″ Hole 6.6875″ Projection, 3-15/16″ Nose Dia, Through Coolant
• Lathe Chuck Accessories; Accessory Type: T-Nut; Product Compatibility: B-24; B-21; Chuck Diameter Compatibility (Decimal Inch): 21.0000; Number Of Pieces: 6
• Taper Shank Drill Bit: 0.7677″ Dia, 2MT, 130 °, High Speed Steel Oxide Finish, 10.2362″ Flute Length, 15.1575″ OAL, Cone Relief Point, Parabolic Flute
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.095″ ID, 0.248″ OD, 0.016″ Thick
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9055; Drill Diameter (mm): 23.00; Maximum Drill Depth (mm): 69.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Tire Chains; For Use With: 225/75R17.5; 225/60R19; 265/75R15; 9.5R16.5; 225/70R17.5; 245/75R16; 7.5R16; 265/70R15; 215/80R17; 235/85R16; 7R17; Axle Type: Dual Axle
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Acrylic Adhesive Backing
• 3D Printer Consumables; Color: Black; Material: ABS; Type: Filament 1KG Spool
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8661; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 66.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Tire Chains; For Use With: 225/75R17.5; 225/60R19; 265/75R15; 9.5R16.5; 225/70R17.5; 245/75R16; 7.5R16; 265/70R15; 215/80R17; 235/85R16; 7R17; Axle Type: Dual Axle
• 10″ Screw Standard Flat Washer: Steel, Uncoated 0.206″ ID, 0.747″ OD, 0.026″ Thick
• 3D Printer Consumables; Color: Natural; Material: ABS; Type: Filament 1KG Spool
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6890; Drill Diameter (mm): 17.50; Maximum Drill Depth (mm): 54.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• 3D Printer Consumables; Color: White; Material: ABS; Type: Filament 1KG Spool
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.183″ ID, 0.379″ OD, 0.028″ Thick
• 1/2″ Screw 2-3/4″ OAL 0.505″ ID x 1″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6693; Drill Diameter (mm): 17.00; Maximum Drill Depth (mm): 51.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Threaded Rod: 3/4-10, 12' Long, Alloy Steel, Grade B7 UNC, Right Hand Thread
• Taper Length Drill Bit: 0.4488″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7087; Drill Diameter (mm): 18.00; Maximum Drill Depth (mm): 54.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Taper Length Drill Bit: 0.4449″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.282″ OD, 0.027″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6496; Drill Diameter (mm): 16.50; Maximum Drill Depth (mm): 51.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Taper Length Drill Bit: 0.4527″ Dia, 142 ° ALtima Plus Finish, RH Cut, Helical Flute, Straight Shank
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8268; Drill Diameter (mm): 21.00; Maximum Drill Depth (mm): 63.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.284″ OD, 0.026″ Thick
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9449; Drill Diameter (mm): 24.00; Maximum Drill Depth (mm): 72.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Masking Tape: 1″ Wide, 60 yd Long, 5.1 mil Thick, Green Polypropylene, Rubber Adhesive, 21 lb/in Tensile Strength
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.7874; Drill Diameter (mm): 20.00; Maximum Drill Depth (mm): 60.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.164″ ID, 0.532″ OD, 0.026″ Thick
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.541″ OD, 0.027″ Thick
• Speed Bumps, Parking Curbs & Accessories; Type: Standard Speed Bump; Length (Inch): 48; Width (Inch): 12; Height (Inch): 2.6; Color: Black; Material: Recycled Rubber
• Corner Radius End Mill: 1/2" Dia, 2" LOC, 0.0150" Radius, 4 Flute, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.173″ ID, 0.531″ OD, 0.056″ Thick
• Corner Radius End Mill: 1/2" Dia, 1-5/8" LOC, 0.0300" Radius, 4 Flute, Solid Carbide
• Indexable Slotting Cutter: 0.122'' Cutting Width, 3.937'' Cutter Dia, Arbor Hole Connection, 1.24'' Depth of Cut, 1'' Hole, Neutral Self Clamping, Uses 6 SS Inserts, 6 Teeth, Straight, Positive, Steel, Black Oxide Finish
• Corner Radius End Mill: 1/2" Dia, 2" LOC, 0.0300" Radius, 4 Flute, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 1/2″ OD, 0.026″ Thick
• Plastic Sheet: Garolite, 1/4″ Thick, Off-White, 39,000 psi Tensile Strength Rockwell M-110
• 1 Base With Wheel, Recycled Rubber 60.0000Lb,