Products

• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (Inch): 9/16; Drill Diameter (Decimal Inch): 0.5620; Maximum Drill Diameter (Decimal Inch): 0.5620; Drill Diameter (Inch): 9/16; Maximum Drill Depth (Decimal Inch): 8.9400; Maximum Drill Dep
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, Solid Carbide, AlCrN Finish Series TC470
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 15.00; Drill Diameter (Decimal Inch): 0.5906; Maximum Drill Diameter (Decimal Inch): 0.5906; Drill Diameter (mm): 15.00; Maximum Drill Depth (Decimal Inch): 12.6772; Maximum Drill Dept
• Shrink-Fit Duo-Lock Holder Cylindrical:
• Garden & Pump Sprayers; Sprayer Type: Handheld; Tank Material: Polypropylene; Volume Capacity: 2.00 cu in; Spray Pattern: Flat; Mist; Stream; Chemical Safe: Yes
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 14.00; Drill Diameter (Decimal Inch): 0.5512; Maximum Drill Diameter (Decimal Inch): 0.5512; Drill Diameter (mm): 14.00; Maximum Drill Depth (Inch): 11-57/64; Maximum Drill Depth (Deci
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.2360 in; Shank Type: Weldon; Toolholder Style: 15B1B; Shank Diameter (Inch): 1.5000; Shank Diameter (mm): 1.5000; Maximum Ramping Angle: 6.5 ™; Compatible Insert Style: RJET; Compatible Insert Size Code:
• Indexable Copy End Mills; Maximum Depth Of Cut: 0.2500 in; Shank Type: Modular; Toolholder Style: 15B4H; Shank Diameter (Inch): 1.1300; Shank Diameter (mm): 1.1300; Maximum Ramping Angle: 6.5 ™; Compatible Insert Style: RJLT; Compatible Insert Size Code:
• Indexable Insert Drills; Drill Style: GT; Maximum Drill Diameter (mm): 14.50; Drill Diameter (Decimal Inch): 0.5709; Maximum Drill Diameter (Decimal Inch): 0.5709; Drill Diameter (mm): 14.50; Maximum Drill Depth (Inch): 11-57/64; Maximum Drill Depth (Deci
• Grooving Tool: LH Cut Solid Carbide
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 3 SDXS Inserts, 0.06″ Max Depth, 7-3/4″ OAL, Through Coolant
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..33.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• Collet Chuck: 3 to 26 mm Capacity, ER Collet, Taper Shank 3.25″ Projection, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Metering Pump Accessories; Type: Electrode; Accessory Type: Electrode; For Use With: Metering Pumps; For Use With: Metering Pumps
• Modular Reamer Heads; Model Number Compatibility: PMX5; Head Diameter (mm): 26.0000; Reamer Finish/Coating: Coated; (TiAlN); TiAlN; Flute Type: Straight; Head Length (Decimal Inch): 0.4720; Hole Tolerance: +/- 0.0004; Spiral Direction: Neutral; Cutting Di
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank W
• Grooving Tool: LH Cut Solid Carbide
• Disposable Coveralls: Size 3X-Large, 3.6 oz, Tychem & Nomex, Zipper Closure White, Taped Seam, Elastic Cuff, Sock with Boot Overflap Ankle, ISO Non-Cleanroom Class
• Lightstick Accessories
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Indexable Square-Shoulder End Mill: EVX10020RS, 20.0000'' Shank Dia, Straight Shank Uses 2, No, 120.00 mm OAL
• Grooving Tool: RH Cut Solid Carbide
• Corner Chamfer End Mill: 12.00 mm Dia, 28.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Lightstick Accessories
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..33.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.098″ ID, 3/8″ OD, 0.035″ Thick
• Grooving Tool: RH Cut Solid Carbide
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• 1/4″ Diam, 2-1/4 Length Under Head, Hex Drive Concrete Screw & Masonry Fastener Carbon Steel, White StalGard Finish
• Grooving Tool: LH Cut Solid Carbide
• Penetrant & Lubricant: 12 oz Aerosol Can Clear
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: CN..43.; Toolholder Style: TCLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Grooving Tool: RH Cut Solid Carbide
• Handheld Radio: Analog & Digital, VHF, 16 Channel Professional, Analog Display, 5 W, Waterproof, Black
• Plastic Rod: Garolite (G-11), 4' Long, 5/8″ Dia, Green Rockwell M-110
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: WN..43.; Toolholder Style: TWLNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.14″ ID, 0.312″ OD, 0.026″ Thick
• End Mill Holder: CAT40 Taper Shank, 5/16″ Hole 4″ Projection, 0.78″ Nose Dia, Through Coolant
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: WN..43.; Toolholder Style: TWLNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 95.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• MR11 Torque Wrench Head For Use with Torco-Fix Torque Wrenches
• End Mill Holder: CAT40 Dual Contact Shank, 5/8″ Hole 3″ Projection, 1-1/2″ Nose Dia, Through Coolant
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.377″ OD, 0.035″ Thick
• Micro Drill Bit: 0.1181″ Dia, 137 °, Solid Carbide TiALN Lite Finish, 3.2284″ OAL, RH Cut, Spiral Flute, Straight-Cylindrical Shank, Series CoroDrill 862
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Carpet & Upholstery Cleaners; Cleaner Type: Carpet Cleaner; Container Size (fl. oz.): 128; Container Type: Bottle; Application: Carpet Cleaning; Product Compatibility: Extractor
• Grooving Tool: RH Cut Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1″ OD, 0.026″ Thick
• Grooving Tool: LH Cut Solid Carbide
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.267″ OD, 0.042″ Thick
• Toner Cartridge: Black Use with HP Laserjet P2030, P2035, P2035N, P2050, P2055, P2055D, P2055DN & P2055X
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Plastic Sheet: Acetal, 1/4″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Pipe Expansion Joint Control Rod Sets; Pipe Size: 2; Length (Inch): 15-1/4; For Use With: Mason ™-Expansion Joints; Contents: (2) Control Rods; Oversized Steel Washer; (8) Nuts; 1/2″ Thick Neoprene Washers; (4) Gussets; Maximum Working Pressure (psi): 250
• Septic System & Cesspool Treatment Liquid Septic Defense
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.169″ ID, 0.295″ OD, 0.04″ Thick
• Pipe Expansion Joint Control Rod Sets; Pipe Size: 1-1/2; Length (Inch): 15-1/4; For Use With: Mason ™-Expansion Joints; Contents: (2) Control Rods; Oversized Steel Washer; (8) Nuts; 1/2″ Thick Neoprene Washers; (4) Gussets; Maximum Working Pressure (psi):
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Pipe Fitting: 3/4 x 3/4″ Fitting, 316 Stainless Steel 4,600 psi
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.263″ OD, 0.013″ Thick
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 25.0000; Material: 4340 Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 2.0000; Shank Length (Decimal Inch): 1.7 in; Finish/Coating: Heat Treated; Material: 4340 St
• Ramp for 4 Drum Square EcoPolyBlend ™ Spill Control Pallet, 100% recycled polyethylene, Black.
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.172″ ID, 0.541″ OD, 0.053″ Thick
• Cable Tools & Kits; Tool Type: Cable Stripper Kit; Number of Pieces: 14.000
• Safety Switches; Type: Fingertip Switch; Length (Inch): 36; Width (Inch): 1; Color: Yellow; Thickness (Decimal Inch): 0.5000; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 2.00
• Cable Tools & Kits; Tool Type: Cable Stripper Kit; Number of Pieces: 12.000
• Safety Switches; Type: Fingertip Switch; Length (Inch): 36; Width (Inch): 1; Color: Red; Thickness (Decimal Inch): 0.5000; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 2.00
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.165″ ID, 0.435″ OD, 0.056″ Thick
• Safety Switches; Type: Fingertip Switch; Length (Inch): 36; Width (Inch): 1; Color: Black; Thickness (Decimal Inch): 0.5000; Number of Lead Wires: 1; Lead Wire Gage (AWG): 18; Cord Length (Feet): 2.00
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 3/8″ OD, 0.045″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.1250; Drill Diameter (Inch): 1-1/8; Maximum Drill Depth (Decimal Inch): 2.2830; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1
• Quick-Change Adapters; Quick Change System: Quick Change System Blitz SBK; Inside Taper Size: ER20; Through Coolant: No; Nose Diameter (mm): 34.00; Projection (mm): 46
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.1090; Drill Diameter (Inch): 1-7/64; Maximum Drill Depth (Decimal Inch): 2.2830; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.156″ ID, 0.443″ OD, 0.035″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.1560; Drill Diameter (Inch): 1-5/32; Maximum Drill Depth (Decimal Inch): 2.3230; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Barrier Parts & Accessories; Type: I-Beam Board; Color: White; Height (Inch): 7.75; Base Material: Polyethylene; Length (Feet): 8.000; Width (Inch): 1.75; Finish/Coating: White; For Use With: Plasticade A-Frame Barricade; Material: Plastic; For Use With:
• Closed Cell Silicone Foam: 6″ Wide, 36″ Long, Brown High Temperature Adhesive Backing
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.2180; Drill Diameter (Inch): 1-7/32; Maximum Drill Depth (Decimal Inch): 2.4410; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.153″ ID, 0.438″ OD, 0.035″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.2500; Drill Diameter (Inch): 1-1/4; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.1870; Drill Diameter (Inch): 1-3/16; Maximum Drill Depth (Decimal Inch): 2.4410; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.152″ ID, 0.372″ OD, 0.026″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.2810; Drill Diameter (Inch): 1-9/32; Maximum Drill Depth (Decimal Inch): 2.5980; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.147″ ID, 0.377″ OD, 0.035″ Thick
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.3280; Drill Diameter (Inch): 1-21/64; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.164″ ID, 0.249″ OD, 0.026″ Thick
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.492″ OD, 0.044″ Thick
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 19.0000; Outside Diameter: 26.0000; Wall Thickness (mm): 3.00; Material: Viton; Standard Coil Length (Feet): 5; Maximum Working Pressure (psi): 145; Hardness: 70A; Special Item Information: Aramid Br
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 1.3120; Drill Diameter (Inch): 1-5/16; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch):
• Extra Length Drill Bit: 0.4724″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.756″ Flute Length, 14.685″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.4528″ Cut Dia, TiSiN Coated
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.275″ OD, 0.016″ Thick
• Extra Length Drill Bit: 0.4687″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.756″ Flute Length, 14.685″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Extended; Pushbutton Shape: Round; Pushbutton Color: Silver; Operator Illumination: NonIlluminated; Operation Type: Momentary (MO); Amperage (mA): 5; Voltage: 12-24; Contact Form: SPDT; Amper
• Extra Length Drill Bit: 0.4646″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.756″ Flute Length, 14.685″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Strip: Buna-N Rubber, 6″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.145″ ID, 0.277″ OD, 0.016″ Thick
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Extended; Pushbutton Shape: Round; Pushbutton Color: Silver; Operator Illumination: NonIlluminated; Operation Type: Momentary (MO); Amperage (mA): 5; Voltage: 12-24; Contact Form: SPDT; Amper
• Extra Length Drill Bit: 0.4528″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.756″ Flute Length, 14.685″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Extra Length Drill Bit: 0.4375″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 12.756″ Flute Length, 14.685″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Corner Chamfer End Mill: 14.00 mm Dia, 30.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.144″ ID, 0.312″ OD, 0.027″ Thick
• Extra Length Drill Bit: 0.4063″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 11.693″ Flute Length, 13.622″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• O-Cedar MaxiStrong Angle Broom with Unflagged Bristles, 1 ea, 6/CT
• Wall Clocks; Type: Wall Clock; Display Type: Analog; Power Source: (1) AA Battery; Face Color: White; Case Color: Black
• Extra Length Drill Bit: 0.4016″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 11.693″ Flute Length, 13.622″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• O-Cedar Quick ChangeTM Mopstick, Fiberglass Handle, 1 ea, NA, 6/CT
• Swiss-Pattern File: 6″ OAL, Cut 0, Pippin 4″ LOC, 25/64″ Wide, 9/64″ Thick, Tang
• Key Switches; Switch Type: Tubular Key Switch; Switch Sequence: On-Off; Contact Form: DPDT; Actuator Type: Switch; Key; Terminal Type: Screw; Voltage: 12-24; Material: Stainless Steel
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.146″ ID, 0.311″ OD, 0.027″ Thick
• Extra Length Drill Bit: 0.4331″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 11.693″ Flute Length, 13.622″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Corner Chamfer End Mill: 16.00 mm Dia, 35.00 mm LOC, 5 Flute, 0.35 mm Chamfer Width, Solid Carbide
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.165″ ID, 0.43″ OD, 0.031″ Thick
• Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 5 Flute, 0.40 mm Chamfer Width, Solid Carbide
• Indexable Boring Bar: A32S-AWLNL0604-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 95.00&deg N/A Steel 250.0000″ OAL, Clamp,
• Cordless Tool Combination Kit: 12V
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 5 Flute, 0.40 mm Chamfer Width, Solid Carbide
• Indexable Boring Bar: A32S-AWLNR0604-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 95.00&deg N/A Steel 250.0000″ OAL, Clamp,
• Wheel Brush: 8″ Wheel Dia, Crimped & Round Nylon & Silicon Carbide, 80 Grit, 3,600 RPM
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.247″ OD, 0.012″ Thick
• Indexable Boring Bar: A32S-ADUNR1104-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 93.00&deg N/A Steel 250.0000″ OAL, Clamp,
• Black 90 ° Street Elbow: 4″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Indexable Boring Bar: A32S-ACLNR0904-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 95.00&deg N/A Steel 250.0000″ OAL, Clamp,
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 1/4″ OD, 0.016″ Thick
• Indexable Boring Bar: A32S-ACLNL0904-D400, 40.00 mm Min Bore, 32.00 mm Shank Dia, 95.00&deg N/A Steel 250.0000″ OAL, Clamp,
• Polymer Flashlight Flashlight 183 Lumens, 345 min Runtime, White LED Bulb, Photoluminescent Body,
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.752″ OD, 0.052″ Thick
• Replaceable Drill Tip
• IDI(.750) SG GRADE Carbide Replaceable Tip Drill TiAlN Finish, 140° Included Angle, 3/4″ Diam, 0.335mm High, Series IDI-SG
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.189″ ID, 0.313″ OD, 0.055″ Thick
• HEPA & Critical Vacuum Cleaners; Vacuum Type: General Purpose; Power Type: Battery; Filtration Type: HEPA; Tank Capacity (Gal.): 730 ml; Tank Material: Plastic; Maximum Air Flow: 42; Power Source: Battery; Collection Capacity: 730 ml
• Compression Packing; Material: PTFE; Size: 1/2; Spool Length: 50; Color: White; Maximum Working Pressure (psi): 1000; 1000.0 psi; PSC Code: 5330; Color: White; Material: PTFE; Maximum Working Pressure: 1000.0 psi; Material: PTFE
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.373″ OD, 0.045″ Thick
• Taper Length Drill Bit: 0.3320″ Dia, 130 ° TiN Finish, RH Cut, Parabolic Flute, Straight Shank, Series 668
• Plastic Sheet: Garolite, 5/8″ Thick, Brown, 10,000 psi Tensile Strength Rockwell M-100
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.142″ ID, 0.382″ OD, 0.026″ Thick
• Filtered Enclosure Cooling Blowers & Accessories; Accessory Type: Exhaust Grille; Accessory Type: Exhaust Grille; Overall Width/Diameter (Inch): 10 in; 10; Overall Width: 10 in; Overall Height: 10 in; Overall Height (Inch): 10 in; 10; For Use With: Filter
• Rail Mount Kits & Parts; Type: Guard Post
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 80.00 mm; Maximum Cutting Diameter: 80.00 mm; Maximum Depth Of Cut: 1.52 mm; Arbor Hole Diameter (mm): 27.00; Compatible Insert Size Code: 0904; Maximum Ramping Angle: 0.8 ™; Series: TG4G; Cutter
• Indexable Copy Face Mills; Maximum Depth Of Cut: 6.00 mm; Compatible Insert Size Code: RJ..1204; Arbor Hole Diameter (mm): 22.00; Maximum Ramping Angle: 4 ™; Overall Height (mm): 50.00 mm; Series: 1A7H; Number of Cutter Inserts: 6; Cutter Style: 1A7H; Ke
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.162″ ID, 3/8″ OD, 0.016″ Thick
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 64.30 mm; Maximum Cutting Diameter: 80.00 mm; Maximum Depth Of Cut: 2.00 mm; Arbor Hole Diameter (mm): 27.00; Compatible Insert Size Code: 1105; Maximum Ramping Angle: 0.5 ™; Series: TG1J; Cutter
• Pedestal File Cabinet: 2 Drawers, Textured Woodgrain Laminate, Espresso 15.63″ OAW
• Masking Tape: 2″ Wide, 60 yd Long, 7.6 mil Thick, Tan Crepe Paper, Rubber Adhesive, 28 lb/in Tensile Strength
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.3840 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1105; Maximum Ramping Angle: 0.35 ™; Series: TG1J; Cut
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.161″ ID, 0.394″ OD, 0.012″ Thick
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (mm): 12.50; Maximum Drill Depth (mm): 196.80; Shank Type: Flatted; Shank Diameter (Inch): 20; Shank Diameter (mm): 20.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maxim
• Sheet: Polyurethane Rubber, 36″ Wide, 36″ Long, Amber Durometer 60, Plain Backing
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (mm): 13.50; Maximum Drill Diameter (Inch): 17/32; Maximum Drill Depth (mm): 211.80; Shank Type: Flatted; Shank Diameter (Inch): 63/64; Shank Diameter (mm): 25.00; Number of Drill Inserts
• Sheet: Polyurethane Rubber, 12″ Wide, 36″ Long, Amber Durometer 60, Plain Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.386″ OD, 0.023″ Thick
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (Inch): 1/2; Maximum Drill Diameter (Decimal Inch): 0.5000; Maximum Drill Depth (Decimal Inch): 10.3100; Shank Type: Flatted; Shank Diameter (Decimal Inch): 0.7600; Number of Drill Insert
• Replaceable Drill Tip
• Plastic Sheet: Garolite, 1/2″ Thick, Brown, 16,000 psi Tensile Strength Rockwell M-100
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (Inch): 1/2; Maximum Drill Diameter (Decimal Inch): 0.5000; Maximum Drill Depth (Inch): 7-3/4; Maximum Drill Depth (Decimal Inch): 7.7500; Shank Type: Flatted; Shank Diameter (Decimal Inc
• Traffic Guard Rail Mount Post: 8.57″ High, Permanent Mount, Steel, Yellow Use with RailGuard 200 Long Leg Rails
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (Inch): 1/2; Maximum Drill Diameter (Decimal Inch): 0.5000; Maximum Drill Depth (Inch): 7-3/4; Maximum Drill Depth (Decimal Inch): 7.7500; Shank Type: Flatted; Shank Diameter (Decimal Inc
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.158″ ID, 0.502″ OD, 0.041″ Thick
• Corner Chamfer End Mill: 25.00 mm Dia, 50.00 mm LOC, 5 Flute, 0.50 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: GD-DH; Maximum Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 196.80; Shank Type: Flatted; Shank Diameter (Inch): 20; Shank Diameter (mm): 20.00; Number of Drill Inserts: 1; Cutting Direction: Right Hand; Maxim
• Traffic Guard Rail Mount Post: 9.13″ High, Permanent Mount, Steel, Yellow Use with RailGuard 200 Long Leg Rails
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.148″ ID, 0.467″ OD, 0.035″ Thick
• Replaceable Tip Drill: 13.5 to 13.99 mm Drill Dia, 21 mm Max Depth, 16 mm Flange Shank Seat Size 13.5, 89 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6535; Drill Diameter (mm): 42.00; Maximum Drill Depth (mm): 126.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 6″ Screw Standard Flat Washer: Steel, Uncoated 0.159″ ID, 0.251″ OD, 0.026″ Thick
• Replaceable Tip Drill: 12.5 to 12.99 mm Drill Dia, 19.5 mm Max Depth, 16 mm Flange Shank Seat Size 12.5, 86.5 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.7717; Drill Diameter (mm): 45.00; Maximum Drill Depth (mm): 135.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Replaceable Tip Drill: 12 to 12.49 mm Drill Dia, 18.8 mm Max Depth, 16 mm Flange Shank Seat Size 12, 85.2 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.8110; Drill Diameter (mm): 46.00; Maximum Drill Depth (mm): 138.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 3″ Screw Standard Flat Washer: Steel, Uncoated 0.102″ ID, 0.499″ OD, 0.054″ Thick
• Replaceable Tip Drill: 14 to 14.49 mm Drill Dia, 21.8 mm Max Depth, 16 mm Flange Shank Seat Size 14, 90.2 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4764; Drill Diameter (mm): 37.50; Maximum Drill Depth (mm): 114.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• DRO Linear Scale: 0.0002″ Resolution, 8.43″ Scale Length 0.0002″ Accuracy
• Replaceable Tip Drill: 14.5 to 14.99 mm Drill Dia, 22.5 mm Max Depth, 16 mm Flange Shank Seat Size 14.5, 91.5 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6929; Drill Diameter (mm): 43.00; Maximum Drill Depth (mm): 129.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.391″ OD, 0.021″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.7913; Drill Diameter (mm): 45.50; Maximum Drill Depth (mm): 138.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6339; Drill Diameter (mm): 41.50; Maximum Drill Depth (mm): 126.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.345″ OD, 0.032″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.7126; Drill Diameter (mm): 43.50; Maximum Drill Depth (mm): 132.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Plastic Sheet: Cast Acrylic, 1″ Thick, Clear, 8,000 psi Tensile Strength Rockwell M-95
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.7323; Drill Diameter (mm): 44.00; Maximum Drill Depth (mm): 132.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Closed Cell Neoprene Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.128″ ID, 0.8″ OD, 0.016″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6732; Drill Diameter (mm): 42.50; Maximum Drill Depth (mm): 129.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4961; Drill Diameter (mm): 38.00; Maximum Drill Depth (mm): 114.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5945; Drill Diameter (mm): 40.50; Maximum Drill Depth (mm): 123.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.7520; Drill Diameter (mm): 44.50; Maximum Drill Depth (mm): 135.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 4″ Screw Standard Flat Washer: Steel, Uncoated 0.129″ ID, 0.56″ OD, 0.045″ Thick
• Closed Cell Neoprene Foam: 36″ Wide, Black Acrylic Adhesive Backing
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.6142; Drill Diameter (mm): 41.00; Maximum Drill Depth (mm): 123.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5157; Drill Diameter (mm): 38.50; Maximum Drill Depth (mm): 117.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5354; Drill Diameter (mm): 39.00; Maximum Drill Depth (mm): 117.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5748; Drill Diameter (mm): 40.00; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.098″ ID, 0.562″ OD, 0.013″ Thick
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.5551; Drill Diameter (mm): 39.50; Maximum Drill Depth (mm): 120.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 4 SDXS Inserts, 0.06″ Max Depth, 5-3/4″ OAL, Through Coolant
• Black Reducing Coupling: 4 x 3″, 150 psi, Threaded Malleable Iron, Black Finish, Class 150
• Die Drill Bit: 135 °, Solid Carbide Bright/Polished Finish, Series CoroDrill 400
• Replaceable Drill Tip: SMF235 AH9130, 140 &deg N/A Seat Size 23, TiAlN Finish, No
• On The Job Safety Begins Here This Plant Has Worked ____ Days Without An OSHA Recordable Injury The Best Previous Record Was ____ Days - Rectangle, 3.75″ Thick, Indoor or Outdoor, For Inspection, Testing and Accident Data
• Replaceable Drill Tip: SMF220 AH9130, 140 &deg N/A Seat Size 22, TiAlN Finish, No
• Indexable Square-Shoulder End Mill: EPAV06M010C08.0R02L, 8.0000'' Shank Dia, Straight Shank Uses 2, Normal Pressure, 100.00 mm OAL
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 2 SDES Inserts, 0.088″ Max Depth, 5″ OAL, Through Coolant
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.3500 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.1180 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1006; Maximum Ramping Angle: 1.2 ™; Series: DP6P; Cutt
• Replaceable Drill Tip: SMF225 AH9130, 140 &deg N/A Seat Size 22, TiAlN Finish, No
• Extension Tap: M18 x 2.5, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 30″ Thread Length, 6H Class of Fit
• Collet Chuck: ER Collet, Taper Shank Through Coolant
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.169″ ID, 0.283″ OD, 0.016″ Thick
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 2.3840 in; Maximum Cutting Diameter: 3.0000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1105; Maximum Ramping Angle: 0.35 ™; Series: TG2J; Cut
• Modular Turning & Profiling Cutting Unit Head: Size C5, 65 mm Head Length, External, Right Hand 35 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Indexable Square-Shoulder End Mill: EPAV06M012C10.0R02L, 10.0000'' Shank Dia, Straight Shank Uses 2, Normal Pressure, 120.00 mm OAL
• Modular Turning & Profiling Cutting Unit Head: Size C5, 65 mm Head Length, External, Left Hand 35 mm Center to Cutting Edge, Uses VN.. Inserts, Through Coolant
• Good Sense Automatic Spray System, 19 g, Good Sense Automatic Spray System, 12/CT Good Sense Automatic Spray System
• 5″ Screw Standard Flat Washer: Steel, Uncoated 0.143″ ID, 0.999″ OD, 0.043″ Thick
• Helical Flute Thread Mill: Internal, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.183″ Cut Dia, 0.79″ LOC, 2.5″ OAL, TiCN Coated
• Plastic Sheet: Acetal, 2″ Thick, 6″ Long, Black, 8,500 psi Tensile Strength Rockwell M-90
• Collet Chuck: 2 to 20 mm Capacity, ER Collet, Taper Shank 3″ Projection, 0.0001″ TIR, Balanced to 25,000 RPM, Through Coolant
• Replaceable Tip Drill: 0.591 to 0.626'' Drill Dia, 1.91″ Max Depth, 0.75'' Straight-Cylindrical Shank Uses H3P Inserts, 4.97″ OAL, Through Coolant
• Power Supply: Use with MSA
• 2″ Screw Standard Flat Washer: Steel, Uncoated 0.096″ ID, 3/8″ OD, 0.056″ Thick
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9449; Drill Diameter (mm): 24.00; Maximum Drill Depth (mm): 48.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, Straight Shank 100 mm Projection, 0.003 mm TIR, Through Coolant
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8268; Drill Diameter (mm): 21.00; Maximum Drill Depth (mm): 42.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Collet Chuck: 0.5 to 10 mm Capacity, ER Collet, Straight Shank 75 mm Projection, 0.003 mm TIR, Through Coolant
• DOT Conspicuity Tape; Color: Yellow; Tape Material: Reflective Sheeting; Width (Inch): 1-3/4; Length (Feet): 150
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.7874; Drill Diameter (mm): 20.00; Maximum Drill Depth (mm): 40.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Replaceable Tip Drill: 15 to 15.9 mm Drill Dia, 48.47 mm Max Depth, 20 mm Straight-Cylindrical Shank Uses H3P Inserts, 126.16 mm OAL, Through Coolant
• Visual Signal Device Accessories; Signal Device Accessory Type: Wall Mount; Overall Length (Decimal Inch): Various; Overall Width/Diameter (Inch): 0.5; Overall Height (Decimal Inch): 0.5; For Use With: PAWS; Overall Height (Inch): 0.5
• Roll: Neoprene Rubber, 56″ Wide, Black Durometer 70, Plain Backing
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.9055; Drill Diameter (mm): 23.00; Maximum Drill Depth (mm): 46.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Widt
• Visual Signal Device Accessories; Signal Device Accessory Type: Wall Mount; Overall Length (Decimal Inch): 91; Overall Width/Diameter (Inch): 3; Overall Height (Decimal Inch): 1; For Use With: PAWS; Overall Height (Inch): 1
• 8″ Screw Standard Flat Washer: Steel, Uncoated 0.174″ ID, 0.861″ OD, 0.031″ Thick
• Helical Flute Thread Mill: 1/16-1/8, Internal, 3 Flute, 1/4″ Shank Dia, Solid Carbide 0.245″ Cut Dia, 0.63″ LOC, TiAlN Coated
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 0.8661; Drill Diameter (mm): 22.00; Maximum Drill Depth (mm): 44.00; Shank Type: Weldon; Shank Diameter (mm): 25.00; Drill Diameter Range (Decimal Inch): 0.7500 to 1.0000; Cutting
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Indexable Turning Toolholders; Cutting Direction: Left Hand; Compatible Insert Size Code: DN..43.; Toolholder Style: TDJNL; Rake: Negative; Multi-use Tool: No; Lead Angle: 93.0; Insert Holding Method: Clamp; Shank Width (Decimal Inch): 1.2500; Shank Width
• Plastic Sheet: Acetal, 3/4″ Thick, Black Rockwell M-90