Products

• Broaching Inserts; Cutting Width: 12.00; Maximum Depth of Cut: 3.89; Insert Thickness: 13.10; Insert Length (mm): 18.50; Chamfer: Yes
• Indexable Square-Shoulder End Mill: EPAV06U0.75C0.75R04, 0.7500'' Cut Dia, 0.2360'' Max Depth of Cut, 0.7500'' Shank Dia, Straight Shank Uses 4, Normal Pressure,
• Cylinder: Neoprene-Blend Spring Rubber, 36″ Long, Black Durometer 70 to 80
• Boring & Grooving Bar Holders; Inside Diameter (mm): 4.00; Outside Diameter: 8.00; Overall Length (mm): 90.00; Head Diameter (Decimal Inch): 0.7100; Shank Length (Inch): 1; Overall Length: 90.0 mm
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Broaching Inserts; Cutting Width: 10.00; Maximum Depth of Cut: 6.00; Insert Thickness: 13.10; Insert Length (mm): 18.50; Chamfer: No
• Indexable Square-Shoulder End Mill: EPAV06U0.75C0.62R04, 0.7500'' Cut Dia, 0.2360'' Max Depth of Cut, 0.6250'' Shank Dia, Straight Shank Uses 4, Normal Pressure,
• Taper Shank Drill Bit: 0.4921″ Dia, 1MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 8.0709″ Flute Length, 12.2047″ OAL, Cone Relief Point, Parabolic Flute
• Welded Bandsaw Blade: 22' Long, 0.063″ Thick Cobalt, Honed Edge, Variable Pitch
• Indexable Square-Shoulder End Mill: EPAV12M020C20.0R04, 20.0000'' Shank Dia, Straight Shank Uses 4, Normal Pressure, 100.00 mm OAL
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 12.7 mm Hole 152.4 mm Projection, 32 mm Nose Dia, 34.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Broaching Inserts; Cutting Width: 12.00; Maximum Depth of Cut: 6.50; Insert Thickness: 13.10; Insert Length (mm): 18.50; Chamfer: No
• Indexable Square-Shoulder End Mill: EPAV06M020C20.0R04, 20.0000'' Shank Dia, Straight Shank Uses 4, Normal Pressure, 100.00 mm OAL
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Thickness: 1 in; Overall Width: 3 in
• Broaching Inserts; Cutting Width: 18.00; Insert Thickness: 14.00; Insert Length (mm): 22.00; Chamfer: No
• Indexable Square-Shoulder End Mill: EPAV06M020C16.0R04, 16.0000'' Shank Dia, Straight Shank Uses 4, Normal Pressure, 110.00 mm OAL
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 6.35 mm Hole 152.4 mm Projection, 26 mm Nose Dia, 24.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Modular Turning & Profiling Cutting Unit Head: Size C4, 55 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses DN.. Inserts, Through Coolant
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Indexable Square-Shoulder End Mill: HPAV12M020M10R04, M10 Modular Connection, Modular Shank Uses 4, Normal Pressure, 49.00 mm OAL
• Broaching Inserts; Cutting Width: 13.00; Insert Thickness: 13.00; Insert Length (mm): 17.00; Chamfer: No
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 9.53 mm Hole 152.4 mm Projection, 30 mm Nose Dia, 29.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Broaching Inserts; Cutting Width (Decimal Inch): 0.4375; Maximum Depth of Cut (Decimal Inch): 0.2500; Insert Thickness (Decimal Inch): 0.5157; Insert Length (Decimal Inch): 0.7283; Chamfer: No
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 19.05 mm Hole 152.4 mm Projection, 42 mm Nose Dia, 46.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Replaceable Drill Tip
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Thickness: 1 in
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Modular Turning & Profiling Cutting Unit Head: Size C4, 42 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 15.88 mm Hole 152.4 mm Projection, 38 mm Nose Dia, 41.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Sheet: Silicone Rubber, 12″ Wide, 36″ Long, Red Durometer 60, High Temperature Adhesive Backing
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank 152.4 mm Projection, 64 mm Nose Dia, 51.9 mm Clamp Depth, 25,000 RPM, Through Coolant
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 25.4 mm Hole 152.4 mm Projection, 57 mm Nose Dia, 46.5 mm Clamp Depth, 25,000 RPM, Through Coolant
• Modular Turning & Profiling Cutting Unit Head: Size C4, 42 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 10 mm Hole 152.4 mm Projection, 30 mm Nose Dia, 41 mm Clamp Depth, 25,000 RPM, Through Coolant
• Laser Printer: Cyan Use with Innovera Toner Cartridge Replacement for HP Color Laserjet Pro MFP M180NW
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 6 mm Hole 152.4 mm Projection, 26 mm Nose Dia, 24.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 12 mm Hole 152.4 mm Projection, 32 mm Nose Dia, 34.1 mm Clamp Depth, 25,000 RPM, Through Coolant
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses WN.. Inserts, Through Coolant
• Hydraulic Tool Chuck: CAT50, CAT50, Taper Shank, 25 mm Hole 152.4 mm Projection, 57 mm Nose Dia, 42.3 mm Clamp Depth, 25,000 RPM, Through Coolant
• Floor Polisher: 5 gal Pail, Use on Vinyl & Floors Hard Floor Care
• Shrink-Fit Tool Holder & Adapter: HSK63A Taper Shank, 0.625″ Hole Dia 6.3″ Projection, 1.06″ Nose Dia, 1.97″ Clamp Depth, Through Coolant
• Strip: Neoprene Rubber, 1/2″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Black Union: 2-1/2″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9921; Diameter (Inch): 1; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; Inc
• Plastic Sheet: Nylon 6/6, 3/8″ Thick, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• 1/4-20, 2″ OAL, 1/2″ Across Flats, Stainless Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/2″ Body Length, 1/2″ Thread Length, 9/16″ Thread Depth, Grade 316, Passivated
• Welded Bandsaw Blade: 12' 6″ Long, 1″ Wide, 0.035″ Thick, 5 to 7 TPI Bi-Metal, Toothed Edge
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9961; Diameter (Inch): 1; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; Inc
• 79 Watt, 7,000 Lumens, 5,000°K, 120-277V, LED Wall Pack Light Fixture Wall Mount, Prismatic Glass Lens, Aluminum Housing, Bronze (Color), Weather Resistant, 9-27/32″ D x 13-9/16″ H x 4-1/8″ W
• Dyna 143 Solvent Cleaner for Parts Washing
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9488; Diameter (mm): 24.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Welded Bandsaw Blade: 12' 6″ Long, 1″ Wide, 0.035″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• 79 Watt, 7,000 Lumens, 5,000°K, 120-277V, LED Wall Pack Light Fixture Wall Mount, Prismatic Glass Lens, Aluminum Housing, Bronze (Color), Weather Resistant, 9-27/32″ D x 13-9/16″ H x 4-1/8″ W
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9844; Diameter (Inch): 63/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating;
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9449; Diameter (mm): 24.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Bridge/Construction Reamers; Reamer Type: Car Reamer; Reamer Diameter (Inch): 3/4; Shank Type: Hex Shank; Flute Type: Spiral; Flute Length (Inch): 5; 5 in; Overall Length: 7 in; Small End Diameter: 0.75 in; Tool Material: High Speed Steel; Overall Length
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9882; Diameter (mm): 25.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Square-Shoulder Face Mill DELETE
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0000; Diameter (Inch): 1; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; Inc
• Thread Forming Tap: 5/16-24, UNF, 1.5P, High Speed Steel, TiN Finish 1-1/8″ Thread Length, 2-23/32″ OAL, H7, Series 776
• Modular Turning & Profiling Cutting Unit Head: Size C4, 44 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9528; Diameter (mm): 24.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• 18V, 7/8″ Chuck, Cordless Rotary Hammer SDS Plus Chuck, Reversible
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9531; Diameter (Inch): 61/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating;
• Thread Forming Tap: 3/8-19, DIN 2189, Normal Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Respirator Hoods: Abrasi-Blast -
• Cordless Impact Wrench: 18V, 1/2″ Drive, 4,000 BPM, 2,100 RPM CXT Battery Included, Charger Not Included
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9567; Diameter (mm): 24.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Right Hand 27 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0039; Diameter (Inch): 1; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; Inc
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9764; Diameter (mm): 24.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Linear Motion Systems; Type: Linear Guide; Linear Motion Type: Linear Guide; Thread Size: M12 x 1.75; Overall Width (Decimal Inch): 0.8800; Overall Length (mm): 8.7100; Center-to-center Mounting Hole Length: 3 in; 76.2 mm; Thread Size: M12 x 1.75
• Wet & Dry Cut Saw Blade: 14″ Dia, 1″ Arbor Hole, 0.125″ Kerf Width, 32 Teeth High Speed Steel Teeth, Use on Concrete, Standard Arbor
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9724; Diameter (mm): 24.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Metering Pump Accessories; Type: Pump Repair Kit; For Use With: CP250V225CRPE; Length (Decimal Inch): 7.0000; For Use With: CP250V225CRPE
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0197; Diameter (mm): 25.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Drill Heads; Series: TBTA; Head Connection Size: BTA SE4-33; Maximum Drill Diameter (Decimal Inch): 1.4760 in; Maximum Drill Diameter (mm): 1.4760 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.6600 in; Drill Head Style: TBTA; Thro
• Thread Forming Tap: 5/16-18, UNC, 2B & 3B Class of Fit, Bottoming, High Speed Steel, TiN Finish 1-1/8″ Thread Length, 2.7188″ OAL, H5, Series 776
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9688; Diameter (Inch): 31/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating;
• Drill Heads; Series: TBTA; Head Connection Size: BTA SE4-33; Maximum Drill Diameter (Decimal Inch): 1.4960 in; Maximum Drill Diameter (mm): 1.4960 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.6600 in; Drill Head Style: TBTA; Thro
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0118; Diameter (mm): 25.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Drill Heads; Series: TBTA; Head Connection Size: BTA DE4-35.5; Maximum Drill Diameter (Decimal Inch): 1.5000 in; Maximum Drill Diameter (mm): 1.5000 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.9000 in; Drill Head Style: TBTA; Th
• Modular Turning & Profiling Cutting Unit Head: Size C4, 50 mm Head Length, External, Left Hand 27 mm Center to Cutting Edge, Uses CN.. Inserts, Through Coolant
• 1-1/4 x 2″ 6063 Aluminum Pipe Nipple Threaded with Thread Sealant, Schedule 40
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0079; Diameter (Inch): 1; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; Inc
• Indexable Copy Face Mills; Maximum Depth Of Cut: 0.2362 in; Compatible Insert Size Code: RNLU1205; Arbor Hole Diameter (mm): 1.00; Maximum Ramping Angle: 0.5 ™; Overall Height (mm): 1.7500 in; Series: DE6H; Number of Cutter Inserts: 7; Cutter Style: DE6H
• Helical Flute Thread Mill: 7/8-9, UNC, 4 Flute, 5/8″ Shank Dia, Solid Carbide 9 TPI, 0.621″ Cut Dia, 1.829″ LOC, 4-1/4″ OAL, TiN-T21 Coated
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9606; Diameter (mm): 24.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Drill Heads; Series: TBTA; Head Connection Size: BTA SE4-33; Maximum Drill Diameter (Decimal Inch): 1.4850 in; Maximum Drill Diameter (mm): 1.4850 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.6600 in; Drill Head Style: TBTA; Thro
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0106; Diameter (mm): 25.67; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Ball Grip Quick-Release Pin: Button Handle, 9/16″ Pin Dia, 3″ Usable Length 4.41″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Strip: Buna-N Rubber, 1/2″ Wide, 120″ Long, Black Durometer 80, Plain Backing
• Drill Heads; Series: TBTA; Head Connection Size: BTA SE4-33; Maximum Drill Diameter (Decimal Inch): 1.4370 in; Maximum Drill Diameter (mm): 1.4370 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.6600 in; Drill Head Style: TBTA; Thro
• Replaceable Drill Tips; Diameter (Decimal Inch): 1.0156; Diameter (Inch): 1-1/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating
• Drill Heads; Series: TBTA; Head Connection Size: BTA SE4-33; Maximum Drill Diameter (Decimal Inch): 1.5000 in; Maximum Drill Diameter (mm): 1.5000 in; Number Of Non-pilot Inserts Used: 3; Head Length (Decimal Inch): 3.6600 in; Drill Head Style: TBTA; Thro
• Floor Cleaner: 1 gal Bottle, Use On Concrete Floors Hard Floor Care
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9685; Diameter (mm): 24.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Thickness: 1 in; Overall Width: 2 in
• Universal Miniature Circuit Breaker Lockout 1 Padlock Max, Fiberglass Reinforced Nylon
• Hydraulic Tool Chuck: Taper Shank, 16 mm Hole 80.5 mm Projection, 38 mm Nose Dia, Through Coolant
• Indexable Copy Face Mills; Maximum Depth Of Cut: 0.3149 in; Compatible Insert Size Code: RCLT1606; Arbor Hole Diameter (mm): 0.75; Maximum Ramping Angle: 6.1 ™; Overall Height (mm): 1.7500 in; Series: 5E6K; Number of Cutter Inserts: 5; Cutter Style: 5E6K
• Hand Sanitizer: Foam, 532 mL, Bottle
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9646; Diameter (Inch): 27/28; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating;
• Hydraulic Tool Chuck: Taper Shank, 12 mm Hole 80.5 mm Projection, 32 mm Nose Dia, Through Coolant
• Lathe Chuck Accessories; Accessory Type: Wedge Plunger; Product Compatibility: B208; Chuck Diameter Compatibility (Decimal Inch): 8.0000
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.9803; Diameter (mm): 24.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y241H; Insert Seat Size: S24; Coolant Through: No; Coating/Finish: H-Coating; I
• 5 Pc Grab & Go Flood Kit
• Hydraulic Tool Chuck: Taper Shank, 10 mm Hole 80.5 mm Projection, 30 mm Nose Dia, Through Coolant
• Sensor Accessories; Sensor Accessory Type: Hand Held Digital Transmitter; Sensor Accessory Type: Hand Held Digital Transmitter; For Use With: Wireless Activation For Automatic Door Operators; For Use With: Wireless Activation For Automatic Door Operators;
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Thickness: 1 in
• Ceramic Tile Cleaner Concentrated Liquid Cleaner
• 10 Pc Grab & Go Flood Kit
• Hydraulic Tool Chuck: Taper Shank 24 mm Nose Dia, Through Coolant
• Guhring GH222.2020.109.00.03.L.IK.52 External Left Hand Cut-Off Insert Holder 20.00mm Square Shank
• Work Boot: Size 12, 16″ High, Polyurethane, Plain Toe Black & Gray, Non-Slip Sole
• Hydraulic Tool Chuck: Taper Shank 20 mm Nose Dia, Through Coolant
• Work Boot: Size 11, 16″ High, Polyurethane, Plain Toe Black & Gray, Non-Slip Sole
• Masking Tape: 742 mm Wide, 110 m Long, 7.1 mil Thick, Tan Rubber, Rubber Adhesive, 47 lb/in Tensile Strength
• Guhring GH222.0750.500.00.03.R.IK.52 External Right Hand Cut-Off Insert Holder 0.7500″ Square Shank
• Hydraulic Tool Chuck: Taper Shank 56 mm Nose Dia, Through Coolant
• Guhring GH222.0750.500.00.03.L.IK.52 External Left Hand Cut-Off Insert Holder 0.7500″ Square Shank
• Hydraulic Tool Chuck: Taper Shank, 20 mm Hole 80.5 mm Projection, 42 mm Nose Dia, Through Coolant
• Black Union: 3/8″, 300 psi, Threaded Malleable Iron, Black Finish, Class 300
• Hydraulic Tool Chuck: Taper Shank 32 mm Nose Dia, Through Coolant
• Guhring GH222.2020.109.00.03.R.IK.52 External Right Hand CUT-OFF INSERT HOLDER 20.00mm Square Shank
• Hydraulic Tool Chuck: Taper Shank 26 mm Nose Dia, Through Coolant
• Replaceable Tip Drill: 19 to 19.9 mm Drill Dia, 61.1 mm Max Depth, 25 mm Straight-Cylindrical Shank Uses H3P Inserts, 152.42 mm OAL, Through Coolant
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Thickness: 1 in; Overall Width: 1 in
• Traffic Barrels, Delineators & Posts; Type: Open Top Delineator; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Width (Inch): 4-5/8; Additional Information: Sheeting Grade: Engineer; Stripe Width: 3 in; Stripe Color: White; Series: 6842; Post
• Hydraulic Tool Chuck: Taper Shank 38 mm Nose Dia, Through Coolant
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 30.0000; Material: 4340 Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 50.0000; Shank Length (Decimal Inch): 49 mm; Finish/Coating: Heat Treated; Material: 4340 St
• Hydraulic Tool Chuck: Taper Shank, 6 mm Hole 80.5 mm Projection, 26 mm Nose Dia, Through Coolant
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 30.0000; Material: 4340 Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 50.0000; Shank Length (Decimal Inch): 54 mm; Finish/Coating: Heat Treated; Material: 4340 St
• NF206G, 62mm ID, 4-1/4″ OAL x 4-1/4″ OAH, 4-Bolt Flange Housing 3-1/4″ Btw Mnt Hole Ctrs, 18mm Base-to-Ctr Ht, Cast Iron
• Replaceable Tip Drill: 20 to 20.9 mm Drill Dia, 64.32 mm Max Depth, 25 mm Straight-Cylindrical Shank Uses H3P Inserts, 157.24 mm OAL, Through Coolant
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Hydraulic Tool Chuck: Taper Shank 34 mm Nose Dia, Through Coolant
• Portable Electric Air Compressors; Horsepower: .5; Horse Power: .5; Input Voltage: 110; Tank Style: Horizontal; Configuration: Horizontal; Tank Size: 1.00; Cfm At 90 Psi: .7; Maximum Working Pressure (psi): 135.000; Maximum Working Pressure: 135.000; Thre
• Hydraulic Tool Chuck: Taper Shank, 8 mm Hole 80.5 mm Projection, 28 mm Nose Dia, Through Coolant
• Indexable Drill Body: Flange Shank 38.1 mm Max Drill, Series V47
• Extra Length Drill Bit: 0.3543″ Dia, 130 °, Cobalt Bright Finish, Parabolic Flute, Straight-Cylindrical Shank, Series 619
• Micro-Mist Fresh Scent Aerosol Deodorizer & Neutralizer MICROMIST FRESH
• Air Angle Grinder: 4-1/2″ Wheel Dia, 12,000 RPM 5/8-11 Spindle, 1/4″ Inlet, Rear Exhaust
• Indexable Drill Body: Flange Shank 31.75 mm Max Drill, Series V47
• Air Fair Lemon Ready-to-Use Malodor Counteractant
• Shrink Fit Tool Holder & Adapter
• Indexable Drill Body: Flange Shank 25.4 mm Max Drill, Series V47
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 155 mm OAL, 33.2 lb Force
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3780; Drill Diameter (mm): 35.00; Maximum Drill Depth (mm): 70.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Shrink Fit Tool Holder & Adapter
• All-Purpose Cleaner: 5 gal Pail Liquid, Pine Scent
• Standard-Duty Shock Absorber: 8 mm Rod Dia, 37 mm OD, 30 mm Stroke, M25 x 1.5 Thread 155 mm OAL, 33.2 lb Force
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (mm): 74.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Helical Flute Thread Mill: 4 Flute, Solid Carbide DUROREY Coated
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 72.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Guhring GH305.0500.500.00.06.R.IK External Right Hand NonFace Grooving Radial Grooving with Thru Coolant Holder 1/2″ Square Shank
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.7087; Drill Diameter (mm): 18.00; Maximum Drill Depth (mm): 90.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Guhring GH305.0500.500.00.06.L.IK External Left Hand NonFace Grooving Radial Grooving with Thru Coolant Holder 1/2″ Square Shank
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3976; Drill Diameter (mm): 35.50; Maximum Drill Depth (mm): 72.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6496; Drill Diameter (mm): 16.50; Maximum Drill Depth (mm): 85.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• COVID-19 & Energy Isolation Sign: ″LOCK-OUT POINT″ Polyester, Adhesive Backed, 1.5″ High
• Imaging Unit: Magenta Use with Xerox Phaser 6,700
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6693; Drill Diameter (mm): 17.00; Maximum Drill Depth (mm): 85.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Plastic Sheet: High Density Polyethylene, 3/8″ Thick, Opaque White, 4,000 psi Tensile Strength Shore D-60
• Spray Paint: Yellow, Flat
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4567; Drill Diameter (mm): 37.00; Maximum Drill Depth (mm): 74.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3583; Drill Diameter (mm): 34.50; Maximum Drill Depth (mm): 70.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Spot Welder Tips; Tip Type: Straight Shank for 5RW Male Cap; Material: RWMA Class 2 - C18200; Type: Straight Shank for 5RW Male Cap
• Taper Length Drill Bit: 0.1850″ Dia, 135 ° TX Finish, 1.6929″ Flute Length, 3.189″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Guhring GS222.0026.120.03.02.N 26.00mm Non-Coolant Cut-Off Blade
• Taper Length Drill Bit: 0.1811″ Dia, 135 ° TX Finish, 1.6929″ Flute Length, 3.189″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6890; Drill Diameter (mm): 17.50; Maximum Drill Depth (mm): 90.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Extra Length Drill Bit: 0.4764″ Dia, 118 °, High Speed Steel Oxide Finish, Spiral Flute, Straight-Cylindrical Shank, Series 235
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3189; Drill Diameter (mm): 33.50; Maximum Drill Depth (mm): 68.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Pushbutton Control Stations; Control Station Type: Emergency Pull Station; Number of Operators: 1; Legend Markings: Pull Start; Switch Action: SPDT; Contact Configuration: SPDT; Operator Type: Handle; Color: Blue; Overall Height (mm): 5; Overall Width (De
• Social Distancing Partition: 54″ OAW, 36″ OAH, Clear Clear
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3386; Drill Diameter (mm): 34.00; Maximum Drill Depth (mm): 68.00; Shank Type: Modular Connection; Shank Diameter (mm): 34.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.50
• Indexable Grooving Toolholder: SNGL16Q09, Uses 9 Inserts, No
• Pushbutton Control Stations; Control Station Type: Emergency Pull Station; Number of Operators: 1; Legend Markings: Pull Start; Switch Action: SPDT; Contact Configuration: SPDT; Operator Type: Handle; Color: Black; Overall Height (mm): 5; Overall Width (D
• Pushbutton Control Stations; Control Station Type: Emergency Pull Station; Number of Operators: 1; Legend Markings: Pull Start; Switch Action: SPDT; Contact Configuration: SPDT; Operator Type: Handle; Color: Yellow; Overall Height (mm): 5; Overall Width (
• Extra Length Drill Bit: 0.3438″ Dia, 130 °, Cobalt Uncoated, 6.89″ Flute Length, 9.843″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• Collet Set: 9 Pc, Series ER25, 5/8″ Capacity
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.8898; Drill Diameter (mm): 48.00; Maximum Drill Depth (mm): 144.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0000; Cuttin
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 12.0000; Outside Diameter: 18.0000; Wall Thickness (mm): 3.00; Material: EPDM; Standard Coil Length (Feet): 25; Maximum Working Pressure (psi): 145; Hardness: 75A; Special Item Information: Polyester
• 3/16″ Diam, 2-3/4 Overall Length, Phillips Drive Concrete Screw & Masonry Fastener Carbon Steel, Blue StalGard Finish
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.8504; Drill Diameter (mm): 47.00; Maximum Drill Depth (mm): 141.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0000; Cuttin
• Roll: Polyurethane Rubber, 36″ Wide, Amber Durometer 60, Plain Backing
• Miter Saws; Bevel: Double; Sliding: Yes; Blade Diameter Compatibility: 8.5; Maximum Speed: 5000 RPM; Maximum Bevel Angle - Left: 0 ™- 48 ™ ™; Maximum Bevel Angle - Right: 0 ™- 5 ™ ™; Positive Stops - Left: 0 ™, 15 ™, 22.5 ™, 31.6 ™, 45 ™ and 50 ™; Positiv
• Push-To-Connect Tube Fitting: Union, 3/8″ OD Kynar, 250 psi
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Metering Pump Accessories; Type: Seal Kit; For Use With: CP250V225CRBR; Length (Decimal Inch): 7.0000; For Use With: CP250V225CRBR
• Duct Hose: Silicone, 10″ ID, 2.2 Hg Vac Rating, 11 psi 12' Long, -65 ° F, Red
• Plastic Sheet: Nylon 6/12, 1″ Thick, Off-White, 10,000 psi Tensile Strength Rockwell M-85
• Taper Shank Drill Bit: 0.6299″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 9.0551″ Flute Length, 13.9764″ OAL, N Point, Spiral Flute
• Silicone Tube: 5/8″ OD, 50' Length 40 Max psi, Red
• Switchmat Relays & Controllers; Type: Relay; Voltage: 120.00; Mat Series Compatibility: HD Series; Standards: 4X NEMA-12; ANSI/NFPA 79-1991; ANSI B11.19-1990; ANSI/ASME B15.1; ANSI/RIA R15.06-1992; Description: 120V Fail Safe Relay
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 63.00 mm; Maximum Cutting Diameter: 63.00 mm; Maximum Depth Of Cut: 1.52 mm; Arbor Hole Diameter (mm): 22.00; Compatible Insert Size Code: 0904; Maximum Ramping Angle: 0.8 ™; Series: TG1G; Cutter
• Closed Cell Neoprene Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Shrink-Fit Tool Holder & Adapter: 1/2″ Shank Dia, C6 Modular Connection Shank, 0.5″ Hole Dia 3.15″ Projection, 0.945″ Nose Dia, Through Coolant
• Paint Sprayer Spray Gun Valve
• Extra Length Drill Bit: 0.3701″ Dia, 130 °, Cobalt Uncoated, 6.89″ Flute Length, 9.843″ OAL, Parabolic Flute, Straight-Cylindrical Shank, Series 618
• Closed Cell Neoprene Foam: 12″ Wide, 36″ Long, Black Plain Backing
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Feet; Plastic Board; Galvanized High Carbon Steel Upright; Barricade Width (Inch): 96; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 16.0000; Top Pa
• Shrink-Fit Tool Holder & Adapter: 5/16″ Shank Dia, C6 Modular Connection Shank, 0.3125″ Hole Dia 3.15″ Projection, 0.827″ Nose Dia, Through Coolant
• Electric Reciprocating Saws; Amperage: 12.0000; Stroke Length: 1.19; Saw Length: 17.6250; Amperage: 12.0000
• Hex Head Cap Screw: 7/8-9 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Shrink-Fit Tool Holder & Adapter: 1/4″ Shank Dia, C6 Modular Connection Shank, 0.25″ Hole Dia 3.15″ Projection, 0.827″ Nose Dia, Through Coolant
• Pipe Sealing Tape; Pipe Repair Tape Type: High Density Repair Tape; Width (Inch): 1/2; Thickness (mil): 4.0000; Thickness: 4.0 mil; Color: White; Material: Polytetrafluoroethylene; Minimum Operating Temperature F: -450; Overall Length (Inch): 520; Maximum
• Shrink-Fit Tool Holder & Adapter: 5/8″ Shank Dia, C6 Modular Connection Shank, 0.625″ Hole Dia 3.35″ Projection, 1.063″ Nose Dia, Through Coolant
• 1/2″ Diam 1' Long 416 Stainless Steel Gear Rack 16 Pitch, 20° Pressure Angle, Round
• Shrink-Fit Tool Holder & Adapter: 1-1/4″ Shank Dia, C6 Modular Connection Shank, 1.25″ Hole Dia 3.75″ Projection, 1.732″ Nose Dia, Through Coolant
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Width: 4 in
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Width: 3 in
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in
• 1/2″ Diam 1' Long 416 Stainless Steel Gear Rack 16 Pitch, 14.5° Pressure Angle, Round
• Miniature Turret Tool Holder: 2.2047″ Projection
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in; Overall Width: 2 in
• Bronze Rectangular Bars; Alloy Grade: 932; Overall Length: 24 in
• Guide Posts; Attachment Method: Demountable; Outside Diameter (Inch): 2 in; Collar Diameter: 2-1/2; Head Length: 1-15/16; Length Under Head: 5.0000; Number of Clamps: 4.000; No Description: 1-9/16; No Description: 0.750; No Description: 1-27/64; Outside D
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 66 mm OD, 50 mm Stroke, M42 x 1.5 Thread 212.5 mm OAL, 83.3 lb Force
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• 25 Lb Pail Tire Lube For Tires
• Straight-Flute & Die Drill Bits
• Strip: Buna-N Rubber, 4″ Wide, 120″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Indexable Square-Shoulder Face Mill: TSE3050R, 22.0000″ Arbor Hole Dia, Uses 3, TEEN Inserts, No, Series TSE
• Replaceable Drill Tip: HT 1-7/16″, 1.4374″/ 36.51 mm Dia, N/A Seat Size 36, Nano-FIREX Finish, No
• Hydraulic Cylinder Mounting Accessories; Type: Clevis Eye; Accessory Type: Clevis Eye; For Use With: RC51,RC53,RC55,RC57,RC59
• Flexible Coupling: Steel, 2-11/16″ Pipe, 3-1/2″ OAL
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Core Bits; Drill Bit Diameter: 2 in; Maximum Drilling Depth (Inch): 13 in; Wet/Dry: Wet; Series: Clipper Classic; Tool Performance: General Purpose; Primary Workpiece Material: Concrete; Body Material: Alloy Steel; Cutting Edge Style: Segmented
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Safety Glass: Scratch-Resistant, Polycarbonate, Clear Lenses, UV Protection Black Frame, Single
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Safety Glass: Scratch-Resistant, Polycarbonate, Clear Lenses, UV Protection Black Frame, Single
• Safety Glass: Scratch-Resistant, Polycarbonate, Clear Lenses, UV Protection Black Frame, Single
• Shrink-Fit Shrink Extension: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Shrink Units
• Collet Chuck: 1″ Capacity, ER Collet, Taper Shank 3.15″ Projection
• Collet Chuck: Mini-ER Collet, Taper Shank 5.44″ OAL, 2-3/4″ Projection
• Safety Glass: Scratch-Resistant, Polycarbonate, Clear Lenses, UV Protection Black Frame, Single
• Lumber; Thickness: 3; Width: 12; Length Ft.: 16; Wood Type: Southern Yellow Pine; Treated: Treated
• Keys & Drivers For Indexables; Drive Type: Torx Plus; Indexable Tool Type: Toolholder; Torx Size: T9; Fastener Type: Torx ™ Plus; Overall Length (Decimal Inch): 2.36220; Package Quantity: 1