Products

• Indexable Cutoff Toolholder: 12.5 mm Max Depth of Cut, 25 mm Max Workpiece Dia, Left Hand 16 mm Shank Height, 16 mm Shank Width, Uses GCMN Inserts, Series GND
• Corner Chamfer End Mill: 14.00 mm Dia, 45.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses CN.. Inserts, Through Coolant
• Taper Length Drill Bit: 0.1811″ Dia, 147 ° Coated, 1.811″ Flute Length, 3.3464″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series CoroDrill 860
• Indexable Cutoff Toolholder: 16 mm Max Depth of Cut, 32 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses CN.. Inserts, Through Coolant
• Corner Chamfer End Mill: 20.00 mm Dia, 60.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Indexable Cutoff Toolholder: 16 mm Max Depth of Cut, 32 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Taper Length Drill Bit: 0.1771″ Dia, 147 ° Coated, 1.811″ Flute Length, 3.3464″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series CoroDrill 860
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.6535; Drill Diameter (mm): 42.00; Maximum Drill Depth (mm): 168.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 16 mm Max Depth of Cut, 32 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Taper Length Drill Bit: 0.1732″ Dia, 147 ° Coated, 1.7716″ Flute Length, 3.3464″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series CoroDrill 860
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.4567; Drill Diameter (mm): 37.00; Maximum Drill Depth (mm): 148.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• Indexable Cutoff Toolholder: 6 mm Max Depth of Cut, 12 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses DN.. Inserts, Through Coolant
• Taper Length Drill Bit: 0.1716″ Dia, 147 ° Coated, 1.7716″ Flute Length, 3.3464″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series CoroDrill 860
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.4961; Drill Diameter (mm): 38.00; Maximum Drill Depth (mm): 152.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Milling Tip Inserts; Milling Tip Type: High Feed; Tool Material: Carbide; Manufacturer Grade: Submicron; Insert Hand: Right Hand; Chipbreaker: No; Series: Haimer Mill; Coating Process: PVD; Number Of Flutes: 4
• Indexable Cutoff Toolholder: 6 mm Max Depth of Cut, 12 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.6929; Drill Diameter (mm): 43.00; Maximum Drill Depth (mm): 172.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses WN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 6 mm Max Depth of Cut, 12 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.5354; Drill Diameter (mm): 39.00; Maximum Drill Depth (mm): 156.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Grooving Toolholder: TMIHN12.7C-32-8, 0.0590″ Max Depth, Uses TMIS 8 Inserts, Through Coolant
• Modular Turning & Profiling Cutting Unit Head: Size C6, 56 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Indexable Grooving Toolholder: TMIHN12.7C-24-8, 0.0590″ Max Depth, Uses TMIS 8 Inserts, Through Coolant
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.7323; Drill Diameter (mm): 44.00; Maximum Drill Depth (mm): 176.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Right Hand 45 mm Center to Cutting Edge, Uses DN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.6142; Drill Diameter (mm): 41.00; Maximum Drill Depth (mm): 164.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Corner Chamfer End Mill: 16.00 mm Dia, 50.00 mm LOC, 4 Flute, 0.18 mm Chamfer Width, Solid Carbide
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses CN.. Inserts, Through Coolant
• Indexable Boring Bar: A16TSCLPR3AE, 30.48 mm Min Bore, N/A Steel Screw, Uses CPMT32 ™, CPMH32 ™, CPMB32 ™ & CPGB32 ™ Inserts
• Indexable Insert Drills; Drill Style: KUBT; Drill Diameter (Decimal Inch): 1.5748; Drill Diameter (mm): 40.00; Maximum Drill Depth (mm): 160.00; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 1.5000 to 2.0
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses DN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses CN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses DN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 6 mm Max Depth of Cut, 12 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 12.5 mm Max Depth of Cut, 25 mm Max Workpiece Dia, Right Hand 16 mm Shank Height, 16 mm Shank Width, Uses GCMN Inserts, Series GND
• All-Purpose Cleaner: 55 gal Drum Foam, Mild Scent
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses TN.. Inserts, Through Coolant
• Indexable Cutoff Toolholder: 10 mm Max Depth of Cut, 20 mm Max Workpiece Dia, Right Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 16 mm Max Depth of Cut, 32 mm Max Workpiece Dia, Left Hand 20 mm Shank Height, 20 mm Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 56 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses SN.. Inserts, Through Coolant
• Corner Chamfer End Mill: 25.00 mm Dia, 75.00 mm LOC, 4 Flute, 0.25 mm Chamfer Width, Solid Carbide
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Left Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Modular Turning & Profiling Cutting Unit Head: Size C6, 65 mm Head Length, External, Left Hand 45 mm Center to Cutting Edge, Uses WN.. Inserts, Through Coolant
• Faucet Handles; Type: Faucet Base with Lever Handles; Style: Diamond; For Manufacturer: Krowne; For Manufacturer's Number: Diamond Series
• Indexable Cutoff Toolholder: 0.38″ Max Depth of Cut, 0.76″ Max Workpiece Dia, Right Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Extra Length Drill Bit: 0.189″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 5.709″ Flute Length, 6.969″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Right Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.1496″ Cut Dia, TiSiN Coated
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Left Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Extra Length Drill Bit: 0.1772″ Dia, 140 °, Solid Carbide TiSiAlCrN Finish, 5.709″ Flute Length, 6.969″ OAL, Straight-Cylindrical Shank, Series DC160-25-A1
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.0945″ Cut Dia, TiSiN Coated
• Indexable Cutoff Toolholder: 1/2″ Max Depth of Cut, 1″ Max Workpiece Dia, Right Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.1063″ Cut Dia, TiSiN Coated
• Indexable Cutoff Toolholder: 1.26″ Max Workpiece Dia, Right Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Roll: Buna-N Rubber, 12″ Wide, Black Durometer 70, Plain Backing
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Left Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide 0.122″ Cut Dia, TiSiN Coated
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 40, Plain Backing
• Indexable Cutoff Toolholder: 1.26″ Max Workpiece Dia, Left Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Indexable Cutoff Toolholder: 0.47″ Max Depth of Cut, 0.94″ Max Workpiece Dia, Right Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Odorstroyer Extra Carpet Care
• Indexable Cutoff Toolholder: 1.26″ Max Workpiece Dia, Left Hand 5/8″ Shank Height, 5/8″ Shank Width, Uses GCMN Inserts, Series GND
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Combination Drill & Reamers; Reamer Size (Inch): 5/32; Reamer Size (Fractional Inch): 5/32; Reamer Material: Micron Grain Carbide; Reamer Finish/Coating: Coated; Diamond; Coating: Diamond; Shank Diameter: 0.1563; Series: UDM5A1AA; Tool Performance: High P
• Hammer Drills & Rotary Hammers; Chuck Type: Keyed; No-Load RPM: 2800 RPM; Voltage: 110.00; Handle Type: Side Handle; Pistol Grip; Amperage: 6.0000; Includes: HP1640Drill Chuck (192541-1)Chuck Key (763440-0)Side Handle (153503-4)Depth Gauge (324219-0); Rev
• Black Wye: 2″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Conduit & Cable Benders; Type: Conduit Bender; Style: Iron; Conduit Type: EMT; IMC; Rigid; Capacity EMT: 3/4; Material: Iron; Minimum Order Quantity: Iron; Opening Size (Inch): 3/4
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Flaring Tools & Tube Expanders; Type: Tube Expander; Maximum Pipe Capacity (Inch): 3/4; Minimum Pipe Capacity: 3/4; Cuts Material Type: Copper; Type: Tube Expander; Type: Tube Expander
• Coveralls & Overalls; Garment Style: Coveralls; Garment Type: General Purpose; Size: X-Large; Color: Navy Blue; Material: Polyester; Hazardous Protection Level: Non Hazardous Protection; Closure Type: Zipper
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.6560; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 1.3390; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• Black Plug: 5″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6250; Drill Diameter (Inch): 5/8; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Weldon; Shank Diameter (Inch): 3/4; Drill Diameter Range (Decimal Inch): 0.0000 to 0.750
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.7030; Drill Diameter (Inch): 45/64; Maximum Drill Depth (Decimal Inch): 1.4170; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• 1/2″ x 10.2' Spool Length, Carbon Fiber Compression Packing 3,500 Max psi, -450 to 1200° F, Dark Gray
• Indexable Boring Bar: S12RSTUPL2, 23.16 mm Min Bore, N/A Steel Screw, Uses TPMX22 ™, TPMT22 ™, TPGH22 ™, TPET22 ™, TPGB22 ™ & TPMH22 ™ Inserts
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.6560; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 2.6770; Shank Type: Weldon; Shank Diameter (Inch): 3/4; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7
• Flaring Tools & Tube Expanders; Type: Tube Expander; Maximum Pipe Capacity (Inch): 7/8; Minimum Pipe Capacity: 7/8; Cuts Material Type: Copper; Type: Tube Expander; Type: Tube Expander
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.5620; Drill Diameter (Inch): 9/16; Maximum Drill Depth (Decimal Inch): 1.1810; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.5930; Drill Diameter (Inch): 19/32; Maximum Drill Depth (Decimal Inch): 2.5200; Shank Type: Weldon; Shank Diameter (Inch): 3/4; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.6250; Drill Diameter (Inch): 5/8; Maximum Drill Depth (Decimal Inch): 1.2600; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0.0
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 0.5620; Drill Diameter (Inch): 9/16; Maximum Drill Depth (Decimal Inch): 2.3620; Shank Type: Weldon; Shank Diameter (Inch): 3/4; Drill Diameter Range (Decimal Inch): 0.0000 to 0.75
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Hand Cleaner: 1,300 mL Cartridge Foam, Pink, Citrus Scent
• Indexable Insert Drills; Drill Style: KUBQ; Drill Diameter (Decimal Inch): 0.5930; Drill Diameter (Inch): 19/32; Maximum Drill Depth (Decimal Inch): 1.2600; Shank Type: Modular Connection; Shank Diameter (mm): 28.00; Drill Diameter Range (Decimal Inch): 0
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.8500 in; Maximum Cutting Diameter: 2.5000 in; Maximum Depth Of Cut: 0.1180 in; Arbor Hole Diameter (mm): 1.00; Compatible Insert Size Code: 1006; Maximum Ramping Angle: 1.6 ™; Series: DP6P; Cutt
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.8840 in; Maximum Cutting Diameter: 2.5000 in; Maximum Depth Of Cut: 0.0780 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 1105; Maximum Ramping Angle: 0.45 ™; Series: TG2J; Cut
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.7230 in; Maximum Cutting Diameter: 2.5000 in; Maximum Depth Of Cut: 0.0787 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 1307; Maximum Ramping Angle: 0.6 ™; Series: DG5P; Cutt
• Glass Scale: 6.69″ Max Measuring Range, 0.0004″ Resolution, 6″ Scale Length IP53, 9.84″ Cable Length
• Tire Chains; For Use With: 11R22.5; 275/80R24.5; 295/75R22.5; 285/70R22.5; 305/70R22.5; 285/70R24.5; 275/75R22.5; 295/70R22.5; Axle Type: Single Axle
• Ball Grip Quick-Release Pin: Button Handle, 1″ Pin Dia, 4″ Usable Length 6.14″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Tire Chains; For Use With: 11R22.5; 275/80R24.5; 295/75R22.5; 285/70R22.5; 305/70R22.5; 285/70R24.5; 275/75R22.5; 295/70R22.5; Axle Type: Single Axle
• Taper Shank Drill Bit: 0.748″ Dia, 2MT, 130 °, High Speed Steel Oxide Finish, 9.6457″ Flute Length, 14.5669″ OAL, Cone Relief Point, Parabolic Flute
• Single Profile Thread Mill: 3/4-10 to 3/4-16, 10 to 16 TPI, Internal & External, 6 Flutes, Solid Carbide 0.495″ Cut Dia, 1/2″ Shank Dia, 3″ OAL, AlTiN Nano Coated
• Replaceable Tip Drill: 14 to 14.49 mm Drill Dia, 21.8 mm Max Depth, 16 mm Straight-Cylindrical Shank Seat Size 080, 90.2 mm OAL, Through Coolant
• All-Purpose Cleaner: 13.9 gal Trigger Spray Bottle, Disinfectant Aerosol, Fresh Citrus & Thyme Scent
• Replaceable Tip Drill: 10.5 to 10.99 mm Drill Dia, 16.5 mm Max Depth, 12 mm Straight-Cylindrical Shank Seat Size 10.5, 77.5 mm OAL, Through Coolant
• Corner Chamfer End Mill: 6.00 mm Dia, 30.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• All-Purpose Cleaner: 13.9 gal Trigger Spray Bottle, Disinfectant Aerosol, Eucalyptus, Spearmint & Thyme Scent
• Replaceable Tip Drill: 11 to 11.49 mm Drill Dia, 17.3 mm Max Depth, 12 mm Straight-Cylindrical Shank Seat Size 11, 79.7 mm OAL, Through Coolant
• Sheet: Buna-N Rubber, 12″ Wide, 36″ Long, Black Durometer 80, Acrylic Adhesive Backing
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 30.0000; Material: 17-4 PH Stainless Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 2.2500; Shank Length (Decimal Inch): 1.88 in; Maximum Holding Force: 10000 lb;
• Replaceable Tip Drill: 12 to 12.49 mm Drill Dia, 18.8 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 12, 82.2 mm OAL, Through Coolant
• Corner Chamfer End Mill: 8.00 mm Dia, 40.00 mm LOC, 4 Flute, 0.08 mm Chamfer Width, Solid Carbide
• Replaceable Tip Drill: 13.5 to 13.99 mm Drill Dia, 21 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 13.5, 86 mm OAL, Through Coolant
• Replaceable Tip Drill: 14.5 to 14.99 mm Drill Dia, 22.5 mm Max Depth, 16 mm Straight-Cylindrical Shank Seat Size 14.5, 91.5 mm OAL, Through Coolant
• 83 Watt, LED Strip Light Surface Mounted, 120 to 277 Volt, 96″ Long x 2-9/16″ Wide x 2.1″ High
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 30.0000; Material: 17-4 PH Stainless Steel; Finish: Heat Treated; Head Diameter (Decimal Inch): 50.0000; Shank Length (Decimal Inch): 49 mm; Maximum Holding Force: 44 kN; Key
• Corner Chamfer End Mill: 10.00 mm Dia, 50.00 mm LOC, 4 Flute, 0.10 mm Chamfer Width, Solid Carbide
• Replaceable Tip Drill: 19 to 19.9 mm Drill Dia, 130 mm Max Depth, 20 mm Straight-Cylindrical Shank Uses DMP Inserts, 218.12 mm OAL, Through Coolant
• Replaceable Tip Drill: 12.5 to 12.99 mm Drill Dia, 19.5 mm Max Depth, 14 mm Straight-Cylindrical Shank Seat Size 12.5, 83.5 mm OAL, Through Coolant
• Plastic Sheet: Acetal, 1-1/4″ Thick, White Rockwell M-90
• Die Drill Bit: 3/4″ Dia, 125 °, Solid Carbide Uncoated, 11-3/4″ Flute, 14″ OAL, Series 172
• Standard-Duty Shock Absorber: 12 mm Rod Dia, 38 mm OD, 75 mm Stroke, M42 x 1.5 Thread 246 mm OAL, 120 lb Force
• Pants & Chaps; Garment Type: Arc Flash; Flame Resistant; Color: Blue Denim; Material: Spandex; Denim; Hazardous Protection Level: HRC 2; Material: Denim; Closure Type: Zipper; Maximum Arc Flash Protection: 13.0 cal/cm ™; Closure: Zipper; Maximum Arc Flash
• Corner Chamfer End Mill: 12.00 mm Dia, 60.00 mm LOC, 4 Flute, 0.13 mm Chamfer Width, Solid Carbide
• Vestil Steel Ergonomic Lumbar Support Stand 275 Lb. Capacity Black
• Trash Bag: 96 gal, 1.1 mil, Pack of (80) 18″ Wide, 65″ High, Plastic, Roll Dispenser, Black
• Pants & Chaps; Garment Type: Arc Flash; Flame Resistant; Color: Blue Denim; Material: Spandex; Denim; Hazardous Protection Level: HRC 2; Material: Denim; Closure Type: Zipper; Maximum Arc Flash Protection: 13.0 cal/cm ™; Closure: Zipper; Maximum Arc Flash
• 1-3/8″ Bore Diam, Spring Steel Internal Snap Retaining Ring 1.526″ Free OD, 0.056″ Groove Width x 0.043″ Groove Depth, 0.05″ Ring Thickness
• Cordless Circular Saws; Voltage: 40.00; Battery Chemistry: Lithium-ion; Blade Diameter Compatibility: 6.5; Tool Compatibility: Track Saw; Battery Included: No; Speed (RPM): 2,500 - 4,900 RPM; Voltage: 40.00; Maximum Speed: 2,500 - 4,900 RPM
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 40, Plain Backing
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 25.0000; Material: 4340 Steel; Finish: Black Oxide; Head Diameter (Decimal Inch): 45.0000; Shank Length (Decimal Inch): 49 mm; Maximum Holding Force: 30 kN; Key Size: 4.000; H
• Skylight Guards; Shape: Half Round; Material: Galvanized steel; Color: Silver; Height (Inch): 15.93; Length (Inch): 28; Width (Inch): 28; Load Rating (Lb.): 400; Standards: CAL OSHA 3212 (b) ™and ™(e) ™and ™1926.501(b) (4)
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 25.0000; Material: 4340 Steel; Finish: Black Oxide; Head Diameter (Decimal Inch): 45.0000; Shank Length (Decimal Inch): 44 mm; Maximum Holding Force: 30 kN; Key Size: 4.000; H
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Upright; Plastic Board; Barricade Width (Inch): 96; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 16.0000; Top Panel Height (Inch): 8; Top Panel Wid
• Indexable Square-Shoulder End Mill: MEC25S2516017, 0.9843'' Cut Dia, Cylindrical Shank Uses 2, Through Coolant, 160.00 mm OAL
• Taper Shank Drill Bit: 0.875″ Dia, 2MT, 118 °, High Speed Steel Oxide Finish, 7.5197″ Flute Length, 11.378″ OAL, N Point, Spiral Flute
• Taper Length Drill Bit: 0.3937″ Dia, 130 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 669
• Taper Length Drill Bit: 0.3438″ Dia, 130 ° TiN Finish, RH Cut, Spiral Flute, Straight Shank, Series 669
• Indexable Turning Toolholders; Hand of Holder: Right Hand; Toolholder Style: KSTB; Rake: Positive; Rake Angle: 0; Multi-use Tool: No; Lead Angle: 0.0; Insert Holding Method: Screw; Shank Diameter (Decimal Inch): 0.8661; Shank Diameter (mm): 22.00; Insert
• Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 80.00; Maximum Cutting Diameter (mm): 80.60; Maximum Depth of Cut (mm): 9.50; Arbor Hole Diameter (mm): 27.00; Lead Angle: 88; Compatible Insert Size Code: SNMU120608HNEN-MM; Cutter Styl
• Air and Fabric Refresher R.T.U Odor Eliminator
• Sheet: Silicone Rubber, 1/4″ Thick, 12″ Wide, 24″ Long, Orange-Red Durometer 20, Adhesive Backing
• Powerplex Heavy-Duty Laundry Detergent
• Whiteboards & Magnetic Dry Erase Boards; Board Material: Melamine; Height (Inch): 18; Width (Inch): 24
• Corner Chamfer End Mill: 14.00 mm Dia, 56.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
• Axial Clamp Modular Shank Modular Reamer Body 63mm Shank Diam, 91.5″ OAL, Right Hand Cut
• Corner Chamfer End Mill: 16.00 mm Dia, 65.00 mm LOC, 4 Flute, 0.18 mm Chamfer Width, Solid Carbide
• Roll: Silicone Rubber, 36″ Wide, Semi-Clear Durometer 60, Plain Backing
• All-Purpose Cleaner: 20 gal Drum Liquid, Pleasant Scent
• Lockout Centers & Stations; Type: Electrical Lockout Station; Product Type: Electrical Lockout Station; Equipped or Empty: Equipped; Maximum Number of Locks: 16; Language: English; Board Coating: None; Station Material: Polycarbonate
• Modular Fixturing Shanks; System Compatibility: Ball Lock; Shank Diameter (mm): 13.0000; Material: 4340 Steel; Finish: Black Oxide; Head Diameter (Decimal Inch): 22.0000; Shank Length (Decimal Inch): 27.6 mm; Maximum Holding Force: 3.3 kN; Key Size: 2.500
• 14mm Minor 18mm Major 38.5mm Step Length 140° High Performance Solid Carbide Subland Step Drill Bit AlTiN & TiSiAlCrN Finish, 73mm Flute Length, 123mm OAL, Series DC260-03
• End Mill Holder: CAT50 Taper Shank, 5/16″ Hole 4″ Projection, 0.88″ Nose Dia, Through Coolant
• Collet Chuck: 0.406″ Capacity, Mini-ER Collet, Taper Shank 4″ Projection
• Strip: Neoprene Rubber, 2″ Wide, 120″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 36' Long x 24' Wide, 16 mil Polyethylene, Rectangle
• EPDM Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Shrink-Fit Setting Pot: 3 to 32 mm Hole Dia 1/8 - 1-1/4″ Shrink Range, Compatible with All Standard Length Presetting Units
• Tarp/Dust Cover: Black, Rectangle, Polyethylene, 20' Long x 12' Wide, 18 mil Polyethylene, Rectangle
• Indexable Thread Mills; Cutting Diameter: 1.1560 in; Maximum Hole Depth (Decimal Inch): 1.9600 in; Maximum Hole Depth (mm): 1.9600 in; Maximum Cutting Length: 1.1810 in; Compatible Insert Style: LYEU; Compatible Insert Size Code: 30..; Toolholder Style: M
• Helical Flute Thread Mill: Internal, 4 Flute, Solid Carbide AlTiN Coated
• Indexable High-Feed End Mill: 1-1/4″ Cut Dia, 1-1/4″ Weldon Flat Shank Uses 3 UNLU Inserts, 0.06″ Max Depth, 5-3/4″ OAL, Through Coolant
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• End Mill Holder: HSK63A Taper Shank, 5/8″ Hole 5″ Projection, 1.63″ Nose Dia, Through Coolant
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Clamps For Indexables; Type: Drawbar; Clamp Style: 5461; Industry Standard Number: 5461 100-121; Series: 5461
• End Mill Holder: HSK63A Taper Shank, 1/8″ Hole 3″ Projection, 0.68″ Nose Dia, Through Coolant
• End Mill Holder: HSK63A Taper Shank, 1/4″ Hole 3″ Projection, 0.78″ Nose Dia, Through Coolant
• End Mill Holder: HSK63A Taper Shank, 3/8″ Hole 3″ Projection, 1″ Nose Dia, Through Coolant
• End Mill Holder: HSK63A Taper Shank, 1/2″ Hole 5″ Projection, 1.38″ Nose Dia, Through Coolant
• Hydraulic Tool Chuck: Taper Shank, 32 mm Hole 81 mm Projection, 58.5 mm Nose Dia, Through Coolant
• End Mill Holder: HSK63A Taper Shank, 3/8″ Hole 5″ Projection, 1″ Nose Dia, Through Coolant
• Plastic Sheet: Polytetrafluoroethylene, 1-1/2″ Thick, Black Shore D-55
• Replaceable Tip Drill: 19 to 19.9 mm Drill Dia, 68 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 110 mm OAL, Through Coolant
• Taper Length Drill Bit: 0.5315″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Traffic Cone & Chain Kit; Material: Plastic; Color: Safety Green; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Safety Green; Length (Feet): 50.00; 50.000; Overall Length: 50.00
• Taper Length Drill Bit: 0.5512″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Barrier Rope & Chain; Type: Traffic Cone & Chain Kit; Material: Plastic; Color: Traffic Orange; Rope/Chain Material: Plastic; Hook Fitting Material: None; Snap End Material: None; Color: Traffic Orange; Length (Feet): 50.00; 50.000; Overall Length: 50.00
• Taper Length Drill Bit: 0.4921″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Traffic Barricades; Type: Type III; Barricade Height (Inch): 63; Material: Galvanized Steel Upright; Plastic Board; Barricade Width (Inch): 48; Reflective: Yes; Compliance: NCHRP-350; MUTCD; Weight (Lb.): 16.0000; Top Panel Height (Inch): 8; Top Panel Wid
• Taper Length Drill Bit: 0.5118″ Dia, 143 ° AlTiN Finish, RH Cut, Helical Flute, Straight Shank, Series B256
• Roll: Silicone Rubber, 36″ Wide, Red Durometer 60, Plain Backing
• Corner Chamfer End Mill: 18.00 mm Dia, 72.00 mm LOC, 4 Flute, 0.18 mm Chamfer Width, Solid Carbide
• Corner Chamfer End Mill: 20.00 mm Dia, 80.00 mm LOC, 4 Flute, 0.20 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3583; Drill Diameter (mm): 34.50; Maximum Drill Depth (mm): 105.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Corner Chamfer End Mill: 8.00 mm Dia, 32.00 mm LOC, 4 Flute, 0.08 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3780; Drill Diameter (mm): 35.00; Maximum Drill Depth (mm): 105.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Specialty System Collets; Collet System: Standard Collet; Collet Series: EHB; Taper Size: Straight; Size (mm): 50.00; Material: Steel; Number of Pieces: 1.000; Head Length (Inch): 0.1968; Type: Straight Sleeve
• Corner Chamfer End Mill: 6.00 mm Dia, 24.00 mm LOC, 4 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4567; Drill Diameter (mm): 37.00; Maximum Drill Depth (mm): 111.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Specialty System Collets; Collet System: Standard Collet; Collet Series: EHW; Taper Size: Straight; Size (mm): 50.00; Material: Steel; Number of Pieces: 1.000; Head Length (Inch): 0.1968; Type: Straight Sleeve
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3189; Drill Diameter (mm): 33.50; Maximum Drill Depth (mm): 102.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3386; Drill Diameter (mm): 34.00; Maximum Drill Depth (mm): 102.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.3976; Drill Diameter (mm): 35.50; Maximum Drill Depth (mm): 108.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4173; Drill Diameter (mm): 36.00; Maximum Drill Depth (mm): 108.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Plastic Rod: Acetal, 5' Long, 2-1/4″ Dia, Black
• Sheet: Silicone Rubber, 24″ Wide, 36″ Long, White Durometer 40, Plain Backing
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (mm): 111.00; Shank Type: Weldon; Shank Diameter (mm): 40.00; Drill Diameter Range (Decimal Inch): 1.3000 to 1.5000; Cutting
• Plastic Rod: Acetal, 5' Long, 2-1/4″ Dia, White
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• NEMA 12 Steel Standard Enclosure with Continuous Hinge Cover 12″ Wide x 14″ High x 8″ Deep, Dust-tight
• Replaceable Tip Drill: 0.4331 to 0.4488'' Drill Dia, 5.276″ Max Depth, 0.625'' Straight-Cylindrical Shank Uses DMP Inserts, 7.72″ OAL, Through Coolant
• Corner Chamfer End Mill: 10.00 mm Dia, 40.00 mm LOC, 4 Flute, 0.10 mm Chamfer Width, Solid Carbide
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 40, Plain Backing
• Replaceable Tip Drill: 0.492 to 0.508'' Drill Dia, 5.996″ Max Depth, 0.625'' Straight-Cylindrical Shank Uses DMP Inserts, 8.46″ OAL, Through Coolant
• Power Tool Charger: 24V, Lithium-ion
• Replaceable Tip Drill: 0.472 to 0.488'' Drill Dia, 5.755″ Max Depth, 0.625'' Straight-Cylindrical Shank Uses DMP Inserts, 8.23″ OAL, Through Coolant
• Taper Length Drill Bit: 0.1496″ Dia, 135 ° TX Finish, 1.6929″ Flute Length, 3.189″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Fixed Lifting Eye Bolt: With Shoulder, M36 x 4.00 Thread, Grade 1030 Steel Fully Threaded
• Corner Chamfer End Mill: 12.00 mm Dia, 48.00 mm LOC, 4 Flute, 0.13 mm Chamfer Width, Solid Carbide
• Replaceable Tip Drill: 11 to 11.4 mm Drill Dia, 134 mm Max Depth, 16 mm Straight-Cylindrical Shank Uses DMP Inserts, 196.45 mm OAL, Through Coolant
• Taper Length Drill Bit: 0.1378″ Dia, 135 ° TX Finish, 1.3386″ Flute Length, 2.8346″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.5000; Drill Diameter (mm): 38.10; Maximum Drill Depth (Decimal Inch): 3.0000; Maximum Drill Depth (mm): 76.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Sh
• Replaceable Tip Drill: 10.5 to 10.9 mm Drill Dia, 128 mm Max Depth, 16 mm Straight-Cylindrical Shank Uses DMP Inserts, 190.05 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.4210; Drill Diameter (mm): 36.09; Maximum Drill Depth (Decimal Inch): 2.8420; Maximum Drill Depth (mm): 72.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/4; Sh
• Taper Length Drill Bit: 0.1339″ Dia, 135 ° TX Finish, 1.3386″ Flute Length, 2.8346″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Replaceable Tip Drill: 11.5 to 11.9 mm Drill Dia, 140 mm Max Depth, 16 mm Straight-Cylindrical Shank Uses DMP Inserts, 202.45 mm OAL, Through Coolant
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.5620; Drill Diameter (mm): 39.67; Maximum Drill Depth (Decimal Inch): 3.1240; Maximum Drill Depth (mm): 79.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Sh
• Taper Length Drill Bit: 0.1260″ Dia, 135 ° TX Finish, 1.3386″ Flute Length, 2.8346″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Replaceable Tip Drill: 0.4134 to 0.4291'' Drill Dia, 5.039″ Max Depth, 0.625'' Straight-Cylindrical Shank Uses DMP Inserts, 7.48″ OAL, Through Coolant
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.6250; Drill Diameter (mm): 41.27; Maximum Drill Depth (Decimal Inch): 3.2500; Maximum Drill Depth (mm): 83.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Sh
• Taper Length Drill Bit: 0.1250″ Dia, 135 ° TX Finish, 1.3386″ Flute Length, 2.8346″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Indexable Insert Drills; Drill Style: D4120; Drill Diameter (Decimal Inch): 1.4370; Drill Diameter (mm): 36.50; Maximum Drill Depth (Decimal Inch): 2.8740; Maximum Drill Depth (mm): 73.00; Shank Type: Straight-Cylindrical; Shank Diameter (Inch): 1-1/2; Sh
• Helical Flute Thread Mill: 3/8, 4 Flute, 3/8″ Shank Dia, Solid Carbide 16 TPI, 0.264″ Cut Dia, 3/16″ LOC, 3.5″ OAL, DUROREY Coated
• Helical Flute Thread Mill: 3/8, 4 Flute, 3/8″ Shank Dia, Solid Carbide 24 TPI, 0.264″ Cut Dia, 1/8″ LOC, 3.5″ OAL, DUROREY Coated
• Buna-N Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Misting Coolers; Oscillation: Oscillating; Fan Size: 8.9000; Blade Length: 4; Air Flow: 1500 CFM; Horsepower: .03 hp; Voltage: 24.00; Voltage: 24.00; Horse Power: .03 hp
• Toilet Bowl Deodorizer Block
• All-Purpose Cleaner: 1 gal Bottle Liquid, Odorless Scent
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Standard-Duty Shock Absorber: 1.2 mm Rod Dia, 8.1 mm OD, 4 mm Stroke, M4 x 0.5 Thread 32.6 mm OAL, 2.5 lb Force
• Standard-Duty Shock Absorber: 1.2 mm Rod Dia, 8.1 mm OD, 4 mm Stroke, M4 x 0.5 Thread 32.6 mm OAL, 2.5 lb Force
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Combustible Replacement Sensor: Use with XCELL
• Taper Length Drill Bit: 0.4016″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 535
• Shrink-Fit Tool Holder & Adapter: CAT50 Taper Shank, 0.375″ Hole Dia 0.945″ Nose Dia
• Shrink-Fit Tool Holder & Adapter: CAT50 Taper Shank, 0.625″ Hole Dia 1.063″ Nose Dia
• Plastic Bar: Polytetrafluoroethylene, 3/4″ Thick, White
• Helical Flute Thread Mill: #6-32, Internal, 4 Flute, Solid Carbide 32 TPI, 0.1024″ Cut Dia, TiSiN Coated
• Helical Flute Thread Mill: 1/4-28, Internal, 4 Flute, Solid Carbide 28 TPI, 0.189″ Cut Dia, TiSiN Coated
• Helical Flute Thread Mill: #12-28, Internal, 4 Flute, Solid Carbide 28 TPI, 0.1614″ Cut Dia, TiSiN Coated
• Helical Flute Thread Mill: #4-40, Internal, 4 Flute, Solid Carbide 40 TPI, 0.0827″ Cut Dia, TiSiN Coated
• Taper Length Drill Bit: 0.4921″ Dia, 130 ° Bright/Uncoated, 5.2756″ Flute Length, 8.0709″ OAL, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Helical Flute Thread Mill: #8-32, Internal, 4 Flute, Solid Carbide 36 TPI, 0.126″ Cut Dia, TiSiN Coated