Products

• Grooving Tool: LH Cut Solid Carbide
• Black Hex Bushing: 4 x 2″, 125 psi, Threaded Cast Iron, Galvanized Finish, Class 125
• Misty Windshield Washer Windshield Washer
• Modular Fixturing Liners; Liner Type: Secondary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.3772 in; Inside Diameter (mm): 25 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compa
• Plastic Rod: Garolite (LE), 4' Long, 9/16″ Dia, Brown Rockwell M-100
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.3772 in; Inside Diameter (mm): 25 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: ™0.005 in; Plate Thickness Compati
• Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 35.042 mm; Inside Diameter (mm): 25 mm; Outside Diameter Tolerance: -0.01 mm; Plate Thickness Tolerance: ™0.13 mm; Plate Thickness Compatibil
• #6 Screw 1-3/8″ OAL 0.14″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Plastic Rod: Garolite (LE), 2' Long, 1-1/8″ Dia, Brown Rockwell M-100
• Plastic Sheet: Acetal, 1/2″ Thick, White Rockwell M-90
• #10 Screw 1-7/16″ OAL 0.192″ ID x 5/16″ OD Round Stainless Steel Circuit Board Spacers Uncoated, Grade 303, Female Unthreaded
• Tool & Cutter Grinding Wheels; Wheel Type: Cup Wheel; Wheel Diameter (Inch): 5 in; Abrasive Material: Diamond; Grade: Super Fine; Grit: 0; Maximum Rpm: 12000.000; Face Width (Inch): 0.25 in
• Spiral Router Bit: 0.375″ Dia, 1.625″ LOC, 3/8″ Shank Dia, Upcut 3-1/2″ OAL, Uncoated
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 1/8″ Thick, White, 4,250 psi Tensile Strength Shore D-70
• Collapsible/Portable Spill Containment Accessories; Accessory Type: Berm Repair Kit; Length (Feet): 10.00; Length (Inch): 10.00; Material: PVC; Width (Feet): 16; Height (Inch): 10; For Use With: Justrite Spill Berms; Overall Length: 10.00; Overall Height:
• Indexable Concave Radius Cutters; Cutter Diameter (Inch): 1.0000; Maximum Depth Of Cut: 1.5000 in; Minimum Cutting Radius (Decimal Inch): 0.0310 in; Maximum Cutting Radius (Decimal Inch): 0.1250 in; Insert Cutting Radius (Decimal Inch): 0.1250 in; Number
• Buckets & Pails
• Shelf Support Bracket: Use with Wire Shelves
• Pushbutton Switch Accessories; Switch Accessory Type: Break Glass Key Keeper; For Use With: Keys; Color: Red; Material: ABS
• Polyester Film Tape: 1/2″ Wide, 72 yd Long, 2.3 mil Thick 25 Lb/In Tensile Strength, Rubber Adhesive, 266 ° F
• Open Shelving Accessories & Component
• Shrink-Fit Accessories; Accessory Type: Holder Support; For Use With: EasyShrink
• White Double-Sided Urethane Foam Tape: 1″ Wide, 5 yd Long, 62.5 mil Thick, Acrylic Adhesive
• Duct Tape: 1/2″ Wide, 6.8 mil Thick, Lead Foil Rubber Adhesive, 20 lb/in Tensile Strength
• Square End Mill: 5/64'' Dia, 0.55'' LOC, 1/8'' Shank Dia, 2-1/2'' OAL, 3 Flutes, Solid Carbide Single End, Uncoated, 30 ° Helix, Centercutting, RH Cut, RH Flute
• Taper Shank Drill Bit: 0.5156″ Dia, 1MT, 118 °, High Speed Steel TiN Finish, 3.9764″ Flute Length, 7.1654″ OAL, Cone Relief Point, Spiral Flute
• 1/2″ Screw 5/8″ OAL 0.505″ ID x 1″ OD Round Nylon Circuit Board Spacers Uncoated, Grade 6/6, Female Unthreaded
• Boring Bar: 2 mm Min Bore, 7 mm Max Depth, Right Hand Cut, Carbide 1.70 mm Shank Dia, 27.30 mm OAL, 0.05 mm Corner Radius
• Grooving Tool: LH Cut Solid Carbide
• Reduced Shank Drill Bit: 1-7/32'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced Shank, Series 625
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• ADKT 1505PDR-HM IC910 Carbide Milling Insert AlTiN Finish, 0.5413″ Long x 0.222″ Thick x 0.3768″ Wide
• Grooving Tool: LH Cut Solid Carbide
• Reduced Shank Drill Bit: 1-1/4'' Dia, 1/2'' Shank Dia, 118 ™, High Speed Steel 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced Shank, Series 625
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/8″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Die Drill Bit: 0.3425″ Dia, 135 °, Solid Carbide Coated, Series 200
• Grooving Tool: RH Cut Solid Carbide
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Grooving Tool: RH Cut Solid Carbide
• Sign: Rectangle & Square, ″Wash Your Hands Before Leaving This Room″ Vinyl, 5″ High
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Sign: Rectangle & Square, ″How To Wear A Mask Properly 1 Wash Your Hands Or Clean Them With Sanitizer 2 Prepare Your Mask 3 Hold Mask By The Ear Loops And Place A Loop Around Each Ear 4 Pull The Bottom Of The Mask Over Your Mouth And Chin 5 Mold Or Pinch
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Corner Radius End Mill: 1/8" Dia, 1/4" LOC, 0.0300" Radius, 4 Flute, Solid Carbide
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Shelf Support Bracket: Use with Wire Shelves
• Grooving Tool: LH Cut Solid Carbide
• Shelf Support Bracket: Use with Wire Shelves
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1-1/2″ Thick, White
• Plastic Bar: Polypropylene, 1-1/2″ Thick, Semi-Clear White
• Grooving Tool: LH Cut Solid Carbide
• Step Blocks; Minimum Height Adjustment (mm): 89 mm; Maximum Height Adjustment: 229 mm; Maximum Height Adjustment (mm): 229.00; Overall Width: 51 mm; Width (Inch): 51 mm; Material: Steel; Height (Inch): 3-7/16; Number of Pieces: 2; Width (mm): 51 mm; Maxim
• Grooving Tool: RH Cut Solid Carbide
• Push-to-Connect Tube Fitting: 1/4″ Thread Stainless Steel, 290 psi
• Tire Accessories; Type: Emergency Chains; For Tire Size: 25″-36''; For Use With: Heavy Equipment; Container Size: Kit; Additional Information: 34.75″ overall length with hooks; 17 links of 12mm x 45mm chain, (2) 11mm x 60mm hooks; For Use With: Heavy Equi
• Threaded Shank Drill Bits; Type: Aircraft Drill; Drill Bit Size (Decimal Inch): 0.2500; Drill Bit Size (Inch): 0.2500; Drill Point Angle: 120; Shank Type: Threaded Shank; Point Type: Dagger; Overall Length (Decimal Inch): 2.5000; Overall Length (Decimal I
• Shelf Support Bracket: Use with Wire Shelves
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Hex Head Cap Screw: 5/8-11 x 2-1/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Black 22-1/2 ° Elbow: 3/4″, 125 psi, Threaded Cast Iron, Black Finish, Class 125
• Collapsible/Portable Spill Containment Accessories; Accessory Type: Berm Repair Kit; Length (Feet): 10.00; Length (Inch): 10.00; Material: PVC; Width (Feet): 16; Height (Inch): 10; For Use With: Justrite Spill Berms; Overall Length: 10.00; Overall Height:
• Plastic Sheet: Acetal, 1/2″ Thick, Black Rockwell M-90
• Tarp/Dust Cover: Brown, Rectangle, Polyethylene, 16' Long x 12' Wide, 16 mil Polyethylene, Rectangle
• Grooving Tool: RH Cut, Full Radius Solid Carbide
• Shelf Support Bracket: Use with Wire Shelves
• ER: ER40, 3/4″
• Grooving Tool: LH Cut, Full Radius Solid Carbide
• Plastic Sheet: Acetal, 3/8″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Two-Way Radio: VHF, 16 Channel Professional, Analog Display, 5 W, Black
• Grooving Tool: RH Cut Solid Carbide
• Spill Kits; Kit Type: Oil Based Liquids; Container Type: Bag; Container Size (Gal.): 9.60; Container Material: Polyethylene; Portable: Yes; Includes: (3) Oil Only 3 in x 4 ft Socs; (2) Disposal Bags; Pair of Goggles; Pair of Nitrile Gloves; (20) Oil Only
• Hex Head Cap Screw: 3/8-24 x 1-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Modular Fixturing Shanks; System Compatibility: SpeedLoc; Shank Diameter (mm): 16 mm; Plate Thickness Compatibility (Decimal Inch): 0.7500; Finish: Black; Head Diameter (Decimal Inch): 1.375 in; Shank Length (Decimal Inch): 1.03 in; Maximum Holding Force:
• Plastic, Rubber & Synthetic Tube; Inside Diameter (Inch): 1/4; Outside Diameter (Inch): 1/2; Wall Thickness (Inch): 1/8; Material: PVC; Standard Coil Length (Feet): 50; Maximum Working Pressure (psi): 175; Hardness: 70A; Special Item Information: Polyeste
• Modular Fixturing Shanks; System Compatibility: SpeedLoc; Shank Diameter (mm): 16 mm; Plate Thickness Compatibility (Decimal Inch): 1.0000; Finish: Black; Head Diameter (Decimal Inch): 1.375 in; Shank Length (Decimal Inch): 1.28 in; Maximum Holding Force:
• 0.9 Gal Vibratory Tumbler Bowl & Lid Dry Operation, Dry Polisher Compatible
• Plastic Sheet: Polyvinylchloride, 1/4″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.8438; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 12; Cutting Width (Decimal Inch): 12; Cutting Width (Inch): 12
• Taper Length Drill Bit: 0.3819″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 317
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9637; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• All-Purpose Cleaner: 16 gal Trigger Spray Bottle Liquid, Lemon Scent
• Edgers, Trimmers & Cutters; Power Type: Battery; Blade Type: Double-Sided; Cutting Width: 30; Cutting Width (Decimal Inch): 30; Cutting Width (Inch): 30
• All-Purpose Cleaner: 16 gal Trigger Spray Bottle Liquid, Gain Original Scent
• Combo Drill & Countersink: Metric, High Speed Steel Bright (Polished) Finish, Left Hand Cut, Series 284
• Plastic Bar: Cast Acrylic, 2″ Thick, Clear Rockwell M-95
• Die Drill Bit: 0.2992″ Dia, 135 °, Solid Carbide Coated, Series 200
• Indexable Square-Shoulder End Mill: MEV20S18061503T, 0.7874'' Cut Dia, Cylindrical Shank Uses 3, Through Coolant, 150.00 mm OAL
• Strip: Neoprene Rubber, 4″ Wide, 120″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Extension Tap: M12 x 1.75, 3 Flutes, D11, Bright/Uncoated, High Speed Steel, Extension Plug, 6″ OAL, 1.66″ Thread Length
• Hex Head Cap Screw: 7/8-9 x 4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Flash Drive: Use with Mac & Windows
• Toilet, Urinal, Blocks & Screens; Material: Rubber; Scent: Unscented; Contains Paradichlorobenzene: No; Color: Black; Additional Information: Width: 17.5 in; Capacity: 1 L; Backing Type: Slip-Resistant; Shape: Triangle; Thickness: 0.17 in; Length: 20 in;
• Sheet: Vinyl Rubber, 12″ Wide, 24″ Long, Black Durometer 65 to 75, Adhesive Backing
• Flexible Coupling: Sinter Carbon Steel, 1-7/8″ Pipe, 1-3/4″ OAL
• Flexible Coupling: Sinter Carbon Steel, 1-5/8″ Pipe, 1-3/4″ OAL
• Flexible Coupling: Sinter Carbon Steel, 1-3/8″ Pipe, 1-3/4″ OAL
• Sheet: Polyurethane Rubber, 12″ Wide, 12″ Long, Amber Durometer 60, Plain Backing
• Lightsticks
• Sheet: Neoprene Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Ball Grip Quick-Release Pin: L-Handle, 25 mm Pin Dia, 40 mm Usable Length 95.1 mm OAL, 17-4 Stainless Steel, Aluminum Handle
• Painter's Tape & Masking Tape: 6″ Wide, 60 yd Long, 5.4 mil Thick, Blue Crepe Paper, Acrylic Adhesive, 27 lb/in Tensile Strength
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• Plastic Bar: Acetal, 2″ Thick, Black Rockwell M-90
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 1/2″ Thick, Black Shore D-70
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 50, Plain Backing
• #10-32, 1-5/8″ OAL, 1/2″ Across Flats, Aluminum Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/4″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade T-3, Uncoated
• Taper Length Drill Bit: 0.3898″ Dia, 130 ° Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 501
• Hex Head Cap Screw: 5/8-11 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated
• Plastic Sheet: Acetal, 3/32″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Compressed Air Regulator: 1/4″ NPT, 300 Max psi, Common-P1 64 CFM
• Sheet: Neoprene Rubber, 12″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Hex Head Cap Screw: 7/8-9 x 2-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Compressed Air Regulator: 1/2″ NPT, 300 Max psi, Common-P1 64 CFM
• Safety Can Accessories
• Strip: Neoprene Rubber, 6″ Wide, 120″ Long, Black Durometer 60, Plain Backing
• Guhring GH305.0750.500.00.06.R.IK.EST External Right Hand NonFace Grooving Radial Grooving with Adjustable Coolant Holder 3/4″ Square Shank
• Metal Flareless Bite Type Tube Fittings; Outside Diameter (mm): 6; Fitting Type: 90 Elbow; Thread Standard: BSPP; Tube Outside Diameter: 6 mm; Thread Size: 1/8 in; 1/8; Thread Type: BSPP; PSC Code: 4720; Thread Size: 1/8 in
• 120mm Bore Diam, Spring Steel Metric Internal Snap Retaining Ring 127mm Free OD, 4.15mm Groove Width x 2mm Groove Depth, 4mm Ring Thickness
• Sheet: Neoprene Rubber, 18″ Wide, 18″ Long, Black Durometer 40, Acrylic Adhesive Backing
• Guhring GH305.0750.500.00.04.R.IK.EST External Right Hand NonFace Grooving Radial Grooving with Adjustable Coolant Holder 3/4″ Square Shank
• Guhring GH305.0750.500.00.06.L.IK.EST External Left Hand NonFace Grooving Radial Grooving with Adjustable Coolant Holder 3/4″ Square Shank
• Guhring GH305.0750.500.00.04.L.IK.EST External Left Hand NonFace Grooving Radial Grooving with Adjustable Coolant Holder 3/4″ Square Shank
• Anchor Accessories; Accessory Type: Wood Handled Brush Extension; For Use With: Clean Out Brushes; Number of Pieces: 1.0
• Wet & Dry Cut Saw Blade: 10″ Dia, 5/8″ Arbor Hole, 0.0945″ Kerf Width, 80 Teeth Use on Metal (Aluminum), Standard Round Arbor
• Back Supports; Support Type: Belt; Belt Closure Type: Hook & Loop; Belt Material: Nylon; Size: Medium; Fits Maximum Waist Size (Inch): 48 in; Fits Minimum Waist Size (Inch): 36 in; Belt Width (Inch): 9; Color: Black; Maximum Waist Size: 48 in; Minimum Wai
• Plastic Bar: Acetal, 3/4″ Thick, Black Rockwell M-90
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4800; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Sheet: Buna-N Rubber, 18″ Wide, 18″ Long, Black Durometer 60, Plain Backing
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4300; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Single Profile Thread Mill: M4-0.70, 36 to 36 TPI, Internal & External, 4 Flutes, Solid Carbide 3″ Cut Dia, 3″ Shank Dia, 50″ OAL, Bright/Uncoated
• Strip: Silicone Rubber, 3″ Wide, 120″ Long, Red Durometer 40, Plain Backing
• Duct Hose: Urethane, 8″ ID, 2 Hg Vac Rating, 3.5 psi 25' Long, -65 to 200 ° F, Clear
• Indexable Turning Toolholders; Cutting Direction: Right Hand; Compatible Insert Size Code: DN..3.53.5.; Toolholder Style: HDNNR; Rake: Negative; Multi-use Tool: No; Lead Angle: 63.0; Insert Holding Method: Lever; Shank Width (Decimal Inch): 0.7500; Shank
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.4820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 3; Shank Diameter (Inch): 1/2; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch):
• Indexable Boring Bar: A06M-STFCR-2, 91.00&deg N/A Steel 6.0000″ OAL, Screw,
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 50, Plain Backing
• Broaching Inserts; Cutting Width: 10.00; Maximum Depth of Cut: 6.00; Insert Thickness: 13.10; Insert Length (mm): 18.50; Chamfer: No
• Locking Inlet: Connector, Industrial, L21-20R, 120 & 208V, Black & White Self-Grounding, 20A, Nylon, 4 Poles, 5 Wire
• Cable Tools & Kits; Number of Pieces: 1.0; Number Of Pieces: 1.0; For Use With: 16 x 20″ Wire Spools
• Cordless Miter Saw: 60.00V, 12" Blade Dia, Single Bevel
• Plastic Bar: Ultra-High-Molecular-Weight Polyethylene, 3/4″ Thick, White
• Service Kit for W74D
• Traffic Barrels, Delineators & Posts; Type: Channelizing Cone; Material: Polyethylene; Reflective: Yes; Base Needed: Yes; Height (Inch): 50.4; Width (Inch): 7-3/4; Additional Information: Sheeting Grade: Engineer; Series: 650R1; Dimensions: 42 in Without
• End Mill Holder: CAT50 Dual Contact Taper Shank, 3/16″ Hole 6″ Projection, 3/4″ Nose Dia
• Single Profile Thread Mill: #6-32 to #6-40, 32 to 40 TPI, Internal & External, 4 Flutes, Solid Carbide 0.098″ Cut Dia, 3/16″ Shank Dia, 2″ OAL, Bright/Uncoated
• Grooving Tool: Face Solid Carbide, 1/2″ Shank Dia, 0.156″ Groove Width
• Disinfecting-Sanitizing Bathroom Cleaner 1
• Glass Cleaners; Form: Liquid; Container Type: Bottle; Container Size: 80 oz; Scent: Unscented; Concentrated: Yes; Application: Glass; Windows; Formula Type: Ammonia Free; Alcohol Free
• Replaceable Tip Drill: 19 to 19.99 mm Drill Dia, 30 mm Max Depth, 20 mm Straight-Cylindrical Shank Seat Size 19, 109 mm OAL, Through Coolant
• Deep Groove Ball Bearing: 125 mm OD Bearing Number 6016
• Air Hose: 50' 300 Working psi, 32 to 150 ° F, PVC, MNPT
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 3/4; Minimum Cutting Diameter (Decimal Inch): 0.7500; Maximum Cutting Diameter (Decimal Inch): 1.4080; Lead Angle: 45; Maximum Depth of Cut (Decimal Inch): 0.3200; Compatible Insert Siz
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 3/4; Minimum Cutting Diameter (Decimal Inch): 0.7500; Maximum Cutting Diameter (Decimal Inch): 1.5460; Lead Angle: 30; Maximum Depth of Cut (Decimal Inch): 0.2200; Compatible Insert Siz
• Indexable Cutoff Toolholder: 6.6 mm Max Depth of Cut, Left Hand 19 mm Shank Height, 19 mm Shank Width, Uses GCMN Inserts, Series GND
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 70 mm OAL, 8.9 lb Force
• Replaceable Tip Drill: 10 to 10.4 mm Drill Dia, 36.2 mm Max Depth, Modular Connection Shank Uses ICP Inserts, 78.2 mm OAL, Through Coolant
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 50, Plain Backing
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 3/4; Minimum Cutting Diameter (Decimal Inch): 0.7500; Maximum Cutting Diameter (Decimal Inch): 1.2200; Lead Angle: 60; Maximum Depth of Cut (Decimal Inch): 0.4000; Compatible Insert Siz
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 70 mm OAL, 8.9 lb Force
• Squeegees Frames & Refills; Type: Floor Squeegee; Blade Width: 24.0 in; Frame Style: Curved; Blade Width (Decimal Inch): 24.0 in; Blade Width (Inch): 24.0 in; Frame Shape: Curved; Squeegee Color: Black; Blade Material: Neoprene; Holder Material: Metal; Co
• Cable Tools & Kits; Number of Pieces: 8.0; Number Of Pieces: 8.0
• Standard-Duty Shock Absorber: 3.5 mm Rod Dia, 19.6 mm OD, 12 mm Stroke, M14 x 1.5 Thread 70 mm OAL, 8.9 lb Force
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Dish Detergent; Form: Liquid; Container Type: Bottle; Container Size (oz.): 38.00; Scent: Original; For Use With: Liquid
• Indexable Chamfer & Angle End Mills; Minimum Cutting Diameter (Inch): 3/4; Minimum Cutting Diameter (Decimal Inch): 0.7500; Maximum Cutting Diameter (Decimal Inch): 1.6410; Lead Angle: 15; Maximum Depth of Cut (Decimal Inch): 0.1150; Compatible Insert Siz
• Sheet: Neoprene Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 90, Plain Backing
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Acrylic Adhesive Backing
• Hand Cleaner: 1 gal Pump Spray Bottle Liquid, White, Citrus Scent
• Sheet: Neoprene Rubber, 24″ Wide, 36″ Long, Black Durometer 70, Plain Backing
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/4″ Thick, Black, 4,250 psi Tensile Strength Shore D-70
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 3/4″ Thick, White, 4,250 psi Tensile Strength Shore D-70
• Micro Drill Bit
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4375; Diameter (Inch): 7/16; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Welded Bandsaw Blade: 17' 6″ Long, 1-1/4″ Wide, 0.042″ Thick, 4 to 6 TPI Bi-Metal, Toothed Edge
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4685; Diameter (Inch): 15/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4213; Diameter (mm): 10.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4688; Diameter (Inch): 15/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Extension Tap: M14 x 2, 3 Flutes, TiCN Finish, Cobalt, Long Reach 4-5 P, 26″ Thread Length, 6H Class of Fit
• Hex Head Cap Screw: 3/8-24 x 2-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Heavy-Duty Guard Rail: Yellow, Painted, Steel 3″ Long, 42″ High, 2 Rails
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4219; Diameter (Inch): 27/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• V-Belt: Section 5V Ethylene Compound, Banded, BX195
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4252; Diameter (mm): 10.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4291; Diameter (mm): 10.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4173; Diameter (mm): 10.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Spot Burnisher: 1 gal Bottle, Use On Floors Hard Floor Care
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4646; Diameter (mm): 11.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Single Profile Thread Mill: 3-48 to 3-56, 48 to 56 TPI, Internal & External, 2 Flutes, Solid Carbide 0.072″ Cut Dia, 1/8″ Shank Dia, 1.5″ OAL, Bright/Uncoated
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Quick-Change Disc: Type R, 2" Dia, 24 Grit, Aluminum Oxide, Non-Woven
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4606; Diameter (mm): 11.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Cable Support Grips; Cable Support Grip Type: Single Loop Support Grip; Maximum Cable Diameter (Decimal Inch): 1.4900 in; Overall Length: 25 in; Overall Diameter: 1.4900 in; Breaking Strength: 1610 lb; Mesh Length: 16 in; Overall Length (Decimal Inch): 25
• Sheet: Silicone Rubber, 12″ Wide, 12″ Long, Semi-Clear Durometer 40, High Temperature Adhesive Backing
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.01″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4134; Diameter (mm): 10.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.04″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4055; Diameter (mm): 10.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.117″ LOC, 0.003″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Plastic Sheet: Acetal, 3/8″ Thick, Black Rockwell M-90
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4531; Diameter (Inch): 29/64; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• PVC Tube: 1-1/2″ ID, 2″ OD, 5' Long 55 Max psi, Clear
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4063; Diameter (Inch): 13/32; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Ink Cartridge: Black & Tri-color Use with HP DeskJet D1660, D2530, D2545, D2560, D2660, D2680, D5560, DeskJet All-In-One F2430, F2440, F2480 & F4210
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.03″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4528; Diameter (mm): 11.50; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4094; Diameter (mm): 10.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 1/64″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Wheel Brushes; Wire Type: Crimped; Outside Diameter (Inch): 12; Arbor Hole Thread Size: 2; Arbor Hole Style: Round; Arbor Hole Size: 2; Fill Material: Steel; Filament Wire Diameter Range: 0.0100-0.0199; Maximum Rpm: 3600.000
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4567; Diameter (mm): 11.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.354″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4449; Diameter (mm): 11.30; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Indexable Boring Bar: C05-SCLCL2, 95.00&deg N/A Solid Carbide 4.6900″ OAL, Screw,
• Indexable Boring Bar: C05-SCLCR2, 95.00&deg N/A Solid Carbide 4.6900″ OAL, Screw,
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.3976; Diameter (mm): 10.10; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.02″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Welding Helmet Accessories; Compatibility: 3M Speedglas Heavy-Duty Welding Helmet G5-01; Adjustment: Non-Adjustable; Color: Black
• Roll: Buna-N Rubber, 12″ Wide, Black Durometer 50, Plain Backing
• Hex Head Cap Screw: 7/8-9 x 4-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4016; Diameter (mm): 10.20; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7323; Diameter (mm): 18.60; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4488; Diameter (mm): 11.40; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7480; Diameter (Inch): 3/4; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Dispenser Settings - Black
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD105; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4370; Diameter (Inch): 7/16; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating;
• Corner Radius End Mill: 0.118″ Dia, 0.177″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7441; Diameter (mm): 18.90; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Spare Parts Packages For Indexables; Indexable Tool Type: Drilling; For Use With: CrownLoc Drill Bodies; Package Includes: Screws; Rod; Spring; Series: SD107; Includes: Screws; Rod; Spring; Parts Package Type: Drilling
• Rotary & Multi-Tools; Product Type: Tool Only; Batteries Included: No; Battery Chemistry: Lithium-ion; No-Load RPM: 20000; Voltage: 18.0; For Use With: StarlockPlus Accessories; Starlock; Handle Type: Straight; Includes: Plunge Saw Blade (1-1/4 in Wood; M
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7756; Diameter (mm): 19.70; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.008″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End, Centercutting
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.4331; Diameter (mm): 11.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Plastic Sheet: Acetal, 1-1/4″ Thick, White Rockwell M-90
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.7402; Diameter (mm): 18.80; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y181H; Insert Seat Size: S18; Coolant Through: No; Coating/Finish: H-Coating; I
• Replaceable Drill Tips; Diameter (Decimal Inch): 0.3937; Diameter (mm): 10.00; Tip Material: Solid Carbide; Manufacturer Grade: Micrograin; Material Grade: Micrograin; Series: Y101H; Insert Seat Size: S10; Coolant Through: No; Coating/Finish: H-Coating; I
• Corner Radius End Mill: 0.039″ Dia, 0.059″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End