Products

• Manual Ball Valve: 1" Pipe, Standard Port, Forged Carbon Steel
• Brand: Ingersoll-Rand / Part #: 47772799001
• Brand: Ingersoll-Rand / Part #: 18002972
• Arc Flash Clothing Kit: Size Small, Cotton, Coveralls & Hoods
• Ratchet Sets; Drive Size: 1/4 in, 1/2 in, 3/8 in; Overall Length (Inch): 12, 10-1/2, 24, 3, 6, 18, 8, 9, 4-1/2; Head Shape: Pear; Head Style: Reversible, Fixed; Material: Steel; Handle Type: L-Handle; Finish: Full-Polished
• Brand: USA Sealing / Part #: BULK-RS-V75-464
• Annular Cutter: 1.063" Dia, 1-3/8" Depth of Cut, Carbide Tipped
• Replacement/Interchange Spin-On Hydraulic Filter Element: Cellulose, 10 µ Cellulose
• Replacement/Interchange Hydraulic Filter Element: Cellulose, 25 µ
• Corner Radius End Mill: 0.078″ Dia, 0.118″ LOC, 0.005″ Radius, 4 Flutes, Solid Carbide 1-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Corner Radius End
• Welded Bandsaw Blade: 20' Long, 3/4″ Wide, 0.032″ Thick, 3 TPI Carbon Steel, Toothed Edge
• Corner Chamfer End Mill: 10.00 mm Dia, 25.00 mm LOC, 6 Flute, 0.05 mm Chamfer Width, Solid Carbide
• Spade Drill Insert: 10.8 mm Dia, Series Y, Solid Carbide AM300 Finish, Series Y
• Welded Bandsaw Blade: 19' 3″ Long, 3/4″ Wide, 0.032″ Thick, 4 TPI Carbon Steel, Toothed Edge
• Masking Tape: 60 yd Long, 5 mil Thick, Green Polypropylene, Rubber Adhesive, 13 lb/in Tensile Strength
• Life Jackets & Vests; Type: Mesh Vest; Size: 2XL; Material: Mesh; Minimum Buoyancy (lbs): 15.5; USCG Rating: 3
• Epoxy Thinners & Activators
• Snow Shovels & Scrapers; Product Type: Snow Shovel; Handle Type: Long; Straight; Handle Material: Plastic; Blade Material: Steel; Handle Length (Decimal Inch): 38; Overall Length (Inch): 50; Overall Length: 50.00
• PVC Tube: 1/4″ ID, 1/2″ OD, 25' Long 100 Max psi, Clear
• Raceways; Cover Type: Continuous Cover; Number of Channels: 1; Overall Depth: 12 in; Overall Width: 12 in; Overall Length (Feet): 4 ft; Overall Depth (Decimal Inch): 12 in; Finish: Painted; Overall Width (Decimal Inch): 12 in; Standards Met: cULus Listed;
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• All-Purpose Cleaner: 32 gal Bottle, Disinfectant Liquid, Fruity Floral Scent
• Replaceable Tip Drill: 0.827 to 0.862'' Drill Dia, 2.661″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 4.18″ OAL, Through Coolant
• Replaceable Tip Drill: 0.866 to 0.902'' Drill Dia, 2.785″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 6.6″ OAL, Through Coolant
• Replaceable Tip Drill: 0.906 to 0.941'' Drill Dia, 2.912″ Max Depth, 1.25'' Straight-Cylindrical Shank Uses H3P Inserts, 6.95″ OAL, Through Coolant
• Hard Drive: Black Use with Computer
• DOT Conspicuity Tape; Color: White; Tape Material: Reflective Sheeting; Width (Inch): 4; Length (Feet): 15
• Corner Chamfer End Mill: 12.00 mm Dia, 28.00 mm LOC, 6 Flute, 0.05 mm Chamfer Width, Solid Carbide
• Replaceable Tip Drill: 0.748 to 0.783'' Drill Dia, 3.904″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 7.5″ OAL, Through Coolant
• DOT Conspicuity Tape; Color: Red; Tape Material: Reflective Sheeting; Width (Inch): 4; Length (Feet): 15
• Replaceable Tip Drill: 0.787 to 0.823'' Drill Dia, 4.11″ Max Depth, 1'' Flatted Shank Uses H3P Inserts, 7.77″ OAL, Through Coolant
• Sheet: Silicone Rubber, 12″ Wide, 24″ Long, Red Durometer 70, Plain Backing
• Nylon Tube: 3/8″ ID, 1/2″ OD, 25' Long 400 Max psi, Blue
• Modular Reamer Bodies; Clamping Method: Axial; Shank Diameter (mm): 1.2598; Shank Length (Decimal Inch): 60.00 mm; Overall Length (Decimal Inch): 167.10; Overall Length (mm): 167.10; Cutting Direction: Right Hand; Shank Length (mm): 60.00 mm
• Modular Fixturing Kits; Set Type: Bolt Kit; System Compatibility: 23420LC/23520LC Lift Check Hoist Ring; Number of Pieces: 3; Includes: C-Clip; Replacement Bolt; Washer
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Modular Fixturing Kits; Set Type: Bolt Kit; System Compatibility: 23421LC/23521LC Lift Check Hoist Ring; Number of Pieces: 3; Includes: C-Clip; Replacement Bolt; Washer
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Extra Length Drill Bit: 135 &deg, Solid Carbide Spiral Flute, Straight Shank, Series SCD
• Traffic Cone & Barricade Accessories; Accessory Type: Barricade Light; Recycled Content: 0; Height (Inch): 15.75; Height (Decimal Inch): 15.75; Material: Plastic; Tape Length (Feet): 7.00; For Use With: Barricade Lighting; Length (Inch): 7.00; Type: Barri
• Black Cap: 5″, 150 psi, Threaded Malleable Iron, Galvanized Finish, Class 150
• Deep Groove Ball Bearing: 110 mm OD Bearing Number 6014
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5118; Drill Diameter (mm): 13.00; Maximum Drill Depth (mm): 52.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.5315; Drill Diameter (mm): 13.50; Maximum Drill Depth (mm): 54.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.4724; Drill Diameter (mm): 12.00; Maximum Drill Depth (mm): 48.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Hex Head Cap Screw: 1/2-13 x 3-3/4″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Taper Length Drill Bit: Bright/Uncoated, RH Cut, Parabolic Flute, Straight Shank, Series 5536
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 0.4921; Drill Diameter (mm): 12.50; Maximum Drill Depth (mm): 50.00; Shank Type: Weldon; Shank Diameter (mm): 20.00; Drill Diameter Range (Decimal Inch): 0.0000 to 0.7500; Cutting
• Replaceable Tip Drill: 1.1417 to 1.1772'' Drill Dia, 13.0312″ Max Depth Seat Size 0.3300, Through Coolant
• Replaceable Tip Drill: 1.1023 to 1.1378'' Drill Dia, 9.1406″ Max Depth Seat Size 0.3300, Through Coolant
• Replaceable Tip Drill: 1.0629 to 1.0984'' Drill Dia, 8.8125″ Max Depth Seat Size 0.3300, Through Coolant
• Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1960; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
• Pushbutton Switches; Switch Type: Push Button; Pushbutton Type: Mushroom Head; Pushbutton Shape: Round; Pushbutton Color: Green; Operator Illumination: NonIlluminated; Operation Type: Pneumatic; Amperage (mA): 10; Voltage: 125; Contact Form: DPST; Standar
• Zepvue- R.T.U. Ready-to-Use Heavy Duty Glass Cleaner
• Ball End Mill: 0.125″ Dia, 0.1″ LOC, 2 Flute, Solid Carbide 2-1/2″ OAL, 1/4″ Shank Dia, 35 ° Helix, AlTiN Coated, Single End
• Replaceable Tip Drill: 13.5 to 13.99 mm Drill Dia, 168 mm Max Depth, 16 mm Flange Shank Seat Size 13.5, 236 mm OAL, Through Coolant
• Replaceable Tip Drill: 13 to 13.49 mm Drill Dia, 162 mm Max Depth, 16 mm Flange Shank Seat Size 13, 229 mm OAL, Through Coolant
• Indexable Insert Drill
• Replaceable Tip Drill: 12.5 to 12.99 mm Drill Dia, 156 mm Max Depth, 16 mm Flange Shank Seat Size 12.5, 223 mm OAL, Through Coolant
• Replaceable Tip Drill: 12 to 12.49 mm Drill Dia, 150 mm Max Depth, 16 mm Flange Shank Seat Size 12, 216 mm OAL, Through Coolant
• Roll: Neoprene Rubber, 36″ Wide, Black Durometer 70, Acrylic Adhesive Backing
• Plastic Bar: Polyether Ether Ketone, 1/4″ Thick, Beige
• Plastic Rod: Garolite, 2' Long, 1″ Dia, Brown Rockwell M-100
• Pipe Expansion Joint Control Rod Sets; Pipe Size: 12; Length (Inch): 21-1/2; For Use With: Mercer ™-Series 451 & 501 Expansion Joints; Contents: (2) Control Rods; (8) Nuts; Steel & Neoprene Washers; (4) Gussets; Maximum Working Pressure (psi): 250; Number
• Collet Chuck: 1 to 16 mm Capacity, ER Collet, Taper Shank 100 mm Projection, Balanced to 20,000 RPM, Through Coolant
• Collet Chuck: 1 to 13 mm Capacity, ER Collet, Taper Shank 100 mm Projection, Balanced to 20,000 RPM, Through Coolant
• Collet Chuck: 2 to 20 mm Capacity, ER Collet, Taper Shank 100 mm Projection, Balanced to 20,000 RPM, Through Coolant
• MIG Flux Core Welding Wire: 0.035″ Dia 5 lb
• Corner Chamfer End Mill: 14.00 mm Dia, 30.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
• Tarp/Dust Cover: White, Rectangle, Polyethylene, 30' Long x 7' Wide, 12 mil Polyethylene, Rectangle
• General Purpose Limit Switches; Actuator Type: Roller Lever; Voltage: 500 V (IEC); 240.00; 300 V (UL); Actuation Force: 0.10; Contact Form: 1NO/1NC; Switch Type: Limit; Contact Configuration: NO; NC; Switch Action: Springs Back (Momentary); Terminal Type:
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.5920 in; Maximum Cutting Diameter: 2.5000 in; Maximum Depth Of Cut: 0.2500 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 1605; Maximum Ramping Angle: 2.5 ™; Series: 5G6Q; Cutt
• Collet Wrenches; Collet Series: GL32; Head Material: Steel; Handle Material: Steel
• Kyocera S32DRV320M209, DRV Magic Drill 32.00mm Cutting Diameter, 32.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Kyocera S32DRV290M209, DRV Magic Drill 29.00mm Cutting Diameter, 32.00mm Shank Diameter, 2xD, Coolant-Through Indexable Insert Drill
• Taper Length Drill Bit: 0.4528″ Dia, 135 ° TX Finish, 4.4882″ Flute Length, 6.3779″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Die Drill Bit: 0.2913″ Dia, 135 °, Solid Carbide Coated, Series 200
• Taper Length Drill Bit: 0.4449″ Dia, 135 ° TX Finish, 4.4882″ Flute Length, 6.3779″ OAL, RH Cut, Spiral Flute, Cylindrical Shank, Series 142P
• Die Drill Bit: 21/64″ Dia, 135 °, Solid Carbide Uncoated, 1″ Flute, 2-1/2″ OAL, Series 200
• Welded Bandsaw Blade: 11' 10″ Long, 1″ Wide, 0.035″ Thick, 3 to 4 TPI Carbide Tipped, Toothed Edge
• Indexable T-Slot Cutters; Cutting Diameter (mm): 40.00; T Slot Bolt Size (mm): 20.00; T-Slot Bolt Size (Inch): 3/4; Cutting Width (mm): 18.000; Shank Diameter (mm): 32.0000; Number of Cutter Inserts: 4; Toolholder Style: METS; Insert Style: SDMT080308E-K;
• Plastic Sheet: Acetal, 2″ Thick, White, 8,500 psi Tensile Strength Rockwell M-90
• Plastic Sheet: Acetal, 2″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Milling Chucks; Taper Size: CAT50; Shank Type: Taper; Hole Diameter (Inch): 3/4; Nose Diameter (Decimal Inch): 2.2400; Projection (Decimal Inch): 4.0000; Through Coolant: Yes
• Shrink-Fit Tool Holder & Adapter: 3/4″ Shank Dia, BT40 Taper Shank 3.54″ Projection, 1.3″ Nose Dia, Through Coolant
• Black Cap: 3/4″, 300 psi, Threaded Malleable Iron, Galvanized Finish, Class 300
• Indexable Insert Drills; Drill Style: D405; Drill Diameter (Inch): 21/32; Maximum Drill Depth (Decimal Inch): 2.6240; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• Indexable Insert Drills; Drill Style: D406; Drill Diameter (Inch): 49/64; Maximum Drill Depth (mm): 77.72; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 75.00 to
• Indexable Insert Drills; Drill Style: D405; Drill Diameter (Inch): 21/32; Maximum Drill Depth (mm): 66.64; Shank Type: Flange; Shank Diameter (mm): 25.00; Number of Drill Inserts: 2; Cutting Direction: Right Hand; Maximum Drill Depth Range (mm): 50.00 to
• Indexable Insert Drills; Drill Style: D406; Drill Diameter (Inch): 49/64; Maximum Drill Depth (Decimal Inch): 3.0600; Shank Type: Flange; Shank Diameter (Inch): 1; Shank Diameter (Decimal Inch): 1.0000; Number of Drill Inserts: 2; Cutting Direction: Right
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 70, Plain Backing
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 70, Acrylic Adhesive Backing
• Plastic Sheet: Acetal, 4″ Thick, Black, 8,500 psi Tensile Strength Rockwell M-90
• Plastic Sheet: Acetal, 1/4″ Thick, White Rockwell M-90
• Corner Chamfer End Mill: 16.00 mm Dia, 35.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
• Inspection & Quality Label: ″Attention_______″, Rectangle, 8″ Wide, 3″ High Paper
• Sheet: Buna-N Rubber, 36″ Wide, 36″ Long, Black Durometer 60, Plain Backing
• Sheet: Silicone Rubber, 18″ Wide, 36″ Long, Red Durometer 60, High Temperature Adhesive Backing
• EPDM Foam: 36″ Wide, 36″ Long, Black Acrylic Adhesive Backing
• Taper Length Drill Bit: 0.3750″ Dia, 118 ° Coated, RH Cut, Spiral Flute, Cylindrical Shank, Series 317
• Pot and Pan High-Foaming, Liquid, Hand Dishwashing Detergent
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1614; Drill Diameter (mm): 29.50; Maximum Drill Depth (mm): 89.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1417; Drill Diameter (mm): 29.00; Maximum Drill Depth (mm): 87.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0236; Drill Diameter (mm): 26.00; Maximum Drill Depth (mm): 78.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0433; Drill Diameter (mm): 26.50; Maximum Drill Depth (mm): 80.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1220; Drill Diameter (mm): 28.50; Maximum Drill Depth (mm): 86.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1024; Drill Diameter (mm): 28.00; Maximum Drill Depth (mm): 84.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0827; Drill Diameter (mm): 27.50; Maximum Drill Depth (mm): 83.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.0630; Drill Diameter (mm): 27.00; Maximum Drill Depth (mm): 81.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• ER: ER32, 19.5 mm 40mm OAL, 33mm Overall Diam, 0.0004″ TIR
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.2008; Drill Diameter (mm): 30.50; Maximum Drill Depth (mm): 92.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• Indexable Insert Drills; Drill Style: MD900; Drill Diameter (Decimal Inch): 1.1811; Drill Diameter (mm): 30.00; Maximum Drill Depth (mm): 90.00; Shank Type: Weldon; Shank Diameter (mm): 32.00; Drill Diameter Range (Decimal Inch): 1.0000 to 1.3000; Cutting
• ER: ER32, 14.5 mm 40mm OAL, 33mm Overall Diam, 0.0004″ TIR
• Good Sense Odor Eliminator, 1 Gal, Manual, 4/CT Good Sense Odor Eliminator
• ER: ER32, 4.5 mm 40mm OAL, 33mm Overall Diam, 0.0004″ TIR
• Copy Paper: Use with Printer
• ER: ER32, 9.5 mm 40mm OAL, 33mm Overall Diam, 0.0004″ TIR
• Tap Collet
• Tap Collet: ER32, 0.381″ 3/8″ Tap
• Indexable High-Feed Face Mills; Minimum Cutting Diameter: 1.2520 in; Maximum Cutting Diameter: 2.0000 in; Maximum Depth Of Cut: 0.0650 in; Arbor Hole Diameter (mm): 0.75; Compatible Insert Size Code: 1205; Maximum Ramping Angle: 1.1 ™; Series: DD6H; Cutt
• Corner Chamfer End Mill: 14.00 mm Dia, 30.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
• Plastic, Rubber & Synthetic Tube; Inside Diameter (mm): 6.0000; Outside Diameter: 10.0000; Wall Thickness (mm): 2.00; Material: Silicone; Standard Coil Length (Feet): 25; Maximum Working Pressure (psi): 30; Hardness: 70A; Special Item Information: High-Te
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CE4
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CE4
• Carpet & Upholstery Cleaners; Cleaner Type: Carpet/Fabric Stain & Spot Remover; Container Size (fl. oz.): 24.00; Form: Liquid; Removes: Wine; Coffee; Blood Stains; Primary Chemical: Hydrogen Peroxide; Standards: CRI; Container Type: Bottle; Scent: Mild; A
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CE4
• #10-32, 1-5/8″ OAL, 1/2″ Across Flats, Steel Male/Female Hex Circuit Board Standoff Fully Threaded, 1-1/4″ Body Length, 3/8″ Thread Length, 1/2″ Thread Depth, Grade 12L14, Zinc-Plated
• Grooving Insert: DX18CF5 WSM23S, Solid Carbide Al Finish, Neutral, 0.079″ Cutting Width, Series DX-E-CF5
• Grooving Insert: DX18CE4 WSM23S, Solid Carbide Al Finish, Neutral, 0.059″ Cutting Width, Series DX-E-CF5
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, Series DX-E-CF5
• Extension Tap: 6-40, 3 Flutes, TiCN Finish, Cobalt, Long Reach 2-3 P, 4.41″ OAL, 0.472″ Thread Length, 2B & 3B Class of Fit
• Grooving Insert: DX18CE4 WSM33S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CF5
• Roll: Neoprene Rubber, 12″ Wide, Black Durometer 40, Plain Backing
• Grooving Insert: DX18CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, Series DX-E-CF5
• Plastic Sheet: Ultra-High-Molecular-Weight Polyethylene, 2-1/2″ Thick, 32″ Long, Black, 4,250 psi Tensile Strength Shore D-70
• Grooving Insert: DX18CF5 WSM33S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF5
• Grooving Insert: DX18CF5 WSM43S, Solid Carbide Al Finish, Left Hand, 0.079″ Cutting Width, Series DX-E-L-CF5
• Grooving Insert: DX18CE4 WSM23S, Solid Carbide Al Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CF5
• Grooving Insert: CF6 WSM43S TiAlN+Al2O3+(Al) Finish, Neutral, 0.118″ Cutting Width, Series DX-E-CF6
• Grooving Insert: DX181E150CE4 WSM43S, Solid Carbide Al Finish, Neutral, 0.059″ Cutting Width, 0.669″ Max Depth, Series Tiger-tec Silver
• Grooving Insert: DX182E250CE4 WKP23S, Solid Carbide Al Finish, Neutral, 0.098″ Cutting Width, 0.669″ Max Depth, Series Tiger-tec Silver
• Collet Set: 18 Pc, Series ER32
• Hex Head Cap Screw: 9/16-12 x 6″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Plastic Sheet: Polytetrafluoroethylene, 2″ Thick, Black Shore D-55
• Roll: SBR Rubber, 36″ Wide, Black Durometer 75, Plain Backing
• Compression Spring: 2.526″ OD, 9″ Free Length 0.207″ Wire Dia, 121.552 lb Max Load, 21.758 lb/in Spring Rate, Music Wire
• Roll: SBR Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• All-Purpose Cleaner: 55 gal Drum Liquid, Odorless Scent
• Compression Spring: 1.41″ OD, 8″ Free Length 0.207″ Wire Dia, 209.56 lb Max Load, 73.866 lb/in Spring Rate, Music Wire
• Sheet: Buna-N Rubber, 18″ Wide, 36″ Long, Black Durometer 50, Acrylic Adhesive Backing
• Compression Spring: 1.528″ OD, 7″ Free Length 0.135″ Wire Dia, 45.339 lb Max Load, 12.174 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 2.75″ Free Length 0.192″ Wire Dia, 123.786 lb Max Load, 150.057 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.41″ OD, 5.25″ Free Length 0.148″ Wire Dia, 62.518 lb Max Load, 26.116 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.82″ OD, 5.25″ Free Length 185.113 lb Max Load, 63.259 lb/in Spring Rate, Music Wire
• Compression Spring: 0.764″ OD, 8″ Free Length 0.112″ Wire Dia, 52.54 lb Max Load, 19.188 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.116″ OD, 6.5″ Free Length 0.125″ Wire Dia, 49.667 lb Max Load, 16.917 lb/in Spring Rate, Stainless Steel
• Compression Spring: 1.469″ OD, 6.75″ Free Length 0.148″ Wire Dia, 60.148 lb Max Load, 19.108 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.585″ OD, 7″ Free Length 0.225″ Wire Dia, 149.99 lb Max Load, 36.568 lb/in Spring Rate, Music Wire
• Compression Spring: 1.821″ OD, 8″ Free Length 0.207″ Wire Dia, 165.716 lb Max Load, 42.829 lb/in Spring Rate, Music Wire
• Low-Profile Machining Chucks; Chuck Diameter (Inch): 199.9 mm; 7.87 in; Chuck Diameter (mm): 199.9 mm; 7.87 in; 199.90; Chuck Diameter (Decimal Inch): 7.8700; Minimum External Chucking Diameter: 19.81 mm; 0.78 in; Maximum External Chucking Diameter: 172.9
• Milling Insert: SAKU 1706ABSR-F50 CTCP220, CTCP220, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Insert: SAKU 1706ABSR-F50 CTPM225, CTPM225, Solid Carbide N/A Finish, 1.0000″ OAW
• Milling Insert: SAKU 1706ABSR-M50 CTCK215, CTCK215, Solid Carbide N/A Finish, 1.0000″ OAW
• Boring Head Bases, Bridges & Counterweights; Type: Boring Slide; Accessory Type: Boring Slide; System Compatibility: EEB; System Compatibility: EEB; Minimum Bore Size (mm): 100.00; Minimum Bore Size: 100.0 mm; Maximum Bore Size: 1020.0 mm; Maximum Bore Si
• Milling Insert: SAKU 1706ABSR-R50 CTPK220, CTPK220, Solid Carbide N/A Finish, 1.0000″ OAW
• Hex Lock Nut: 9/16-12, Grade 9 Steel, Cadmium-Plated with Wax 0.486″ High, 7/8″ Width Across Flats, Right Hand Thread
• Ink Cartridge: Black Cyan Magenta & Yellow Use with Epson WorkForce WF-2630, WF-2650, WF-2660 & Expression XP-420
• Ball End Mill: 0.25″ Dia, 0.375″ LOC, 3 Flute, Solid Carbide 4″ OAL, 1/4″ Shank Dia, 42 ° Helix, TiB2 Coated, Single End
• Milling Insert: SAKU 1706ABSR-R50 CTCK215, CTCK215, Solid Carbide N/A Finish, 1.0000″ OAW
• Compression Spring: 1.116″ OD, 3.5″ Free Length 0.162″ Wire Dia, 98.402 lb Max Load, 93.268 lb/in Spring Rate, Stainless Steel
• Indexable Insert Drills; Drill Style: KUBP; Drill Diameter (Decimal Inch): 3.2677; Drill Diameter (mm): 83.00; Maximum Drill Depth (mm): 252.00; Shank Type: Modular Connection; Shank Diameter (mm): 46.00; Drill Diameter Range (Decimal Inch): 3.0000+; Cutt
• Sheet: Neoprene Rubber, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• Compression Spring: 0.705″ OD, 6.5″ Free Length 0.125″ Wire Dia, 75.178 lb Max Load, 47.396 lb/in Spring Rate, Stainless Steel
• Sheet: Buna-N Rubber, 6″ Wide, 12″ Long, Black Durometer 40, Plain Backing
• Compression Spring: 0.705″ OD, 8″ Free Length 0.112″ Wire Dia, 56.444 lb Max Load, 23.218 lb/in Spring Rate, Stainless Steel
• Air Operated Diaphragm Pump: 1″ NPT, Aluminum Housing
• Die Drill Bit: 0.2795″ Dia, 135 °, Solid Carbide Coated, Series 200
• Die Drill Bit: 0.3228″ Dia, 135 °, Solid Carbide Uncoated, Series 200
• Ball Grip Quick-Release Pin: T-Handle, 3/8″ Pin Dia, 2″ Usable Length 3.34″ OAL, 17-4 Stainless Steel, Stainless Steel Handle
• Cordless Riveters; Blind Rivet Diameter Aluminum: 0.21875 in; 0.25 in; 0.1875 in; 0.28125 in; Blind Rivet Diameter Stainless Steel: 0.21875 in; 0.25 in; 0.1875 in; 0.28125 in; Blind Rivet Diameter Steel: 0.21875 in; 0.25 in; 0.1875 in; 0.28125 in; Stroke
• Plastic Sheet: Garolite, 1/8″ Thick, Yellow, 40,000 psi Tensile Strength Rockwell M-110
• Hex Head Cap Screw: 1/4-28 x 3-1/2″, Grade 9 Alloy Steel, Zinc-Plated Clear Chromate
• Social Distancing Partition: 30″ OAW, 30″ OAH, Plastic, Clear Clear, Plastic, 1/8″ Thick
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.059″ Groove Width
• Rain & Chemical Resistant Jacket: 4X-Large, Gray, SuperFabric Zipper Closure
• Grooving Tool: 3/8″ Shank Dia
• Thread Forming Tap: DIN 2174, 6HX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Ball End Mill: 0.0197″ Dia, 0.0295″ LOC, 4 Flute, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 37 ° Helix, AlTiN Coated, Single End
• Thread Forming Tap: #8-36, DIN 2184-1, 2BX Class of Fit, 2 to 3, High Speed Steel, TiN Finish Series TC410
• Roll: Buna-N Rubber, 36″ Wide, Black Durometer 60, Plain Backing
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3800; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 3/4; Radius: 0.0080; Overall Length (Decimal Inch): 2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal Inch
• Welder's & Heat Protective Gloves
• Profiling Tools; Minimum Bore Diameter (Decimal Inch): 0.3820; Maximum Bore Depth (Decimal Inch): 1; Radius: 0.0080; Overall Length (Decimal Inch): 2-1/2; Shank Diameter (Inch): 3/8; Projection: Projection; Finish/Coating: Uncoated; Projection (Decimal In
• Toilet Seats; Type: Closed Front w/ Cover and Slow Close; Style: Slow Close; Material: Plastic; Color: White; Outside Width: 14-1/2; Inside Width: 0; Length (Inch): 18.75; Minimum Order Quantity: Plastic; Material: Plastic
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.125″ Groove Width
• Plastic Sheet: Polyvinylchloride, 3/16″ Thick, Dark Gray, 4,250 psi Tensile Strength Rockwell R-115
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.062″ Groove Width
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.055″ Groove Width
• Turning Insert: WNMG060404FW5 WPP20S, TiCN, Al2O3 & TiCN Finish, Left Hand, 1/2″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• 36V, 1-9/16″ Chuck, Cordless Rotary Hammer Kit SDS Max Chuck, Reversible
• Grooving Tool: Retaining Ring Solid Carbide, 3/8″ Shank Dia, 0.055″ Groove Width
• Turning Insert: DNMG150408FW5 WSM20S, TiCN, Al2O3 & TiCN Finish, Left Hand, 1/2″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Single Pole Plugs & Connectors; Connector Type: Male; End Style: Male; Termination Method: Double Set Screw; Amperage: 400 A; Voltage: 600 V; NEMA Rating: 3R, 4X, 12; Voltage: 600 V; Amperage: 400 A
• Turning Insert: DNMG150604FW5 WPP10S, TiCN, Al2O3 & TiCN Finish, Neutral, 1/2″ Inscribed Circle, 35.0 &deg N/A Rhombic,
• Self-Retracting Lifeline: 130 to 310 lb Capacity, Carabiner
• Compression Spring: 1.88″ OD, 6.5″ Free Length 0.225″ Wire Dia, 202.501 lb Max Load, 69.603 lb/in Spring Rate, Music Wire
• Sheet Gasketing; Width (Inch): 2; Thickness: 1/16; Length (Feet): 10; Length (Inch): 120.0000; Color: Brown; Material: Cork with SBR Sponge Rubber Blend; Minimum Temperature (F): 0.000; Backing Type: Adhesive; Material: Cork with SBR Sponge Rubber Blend;
• Corner Chamfer End Mill: 16.00 mm Dia, 35.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
• Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.41″ OD, 5.5″ Free Length 349.474 lb Max Load, 262.101 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Plastic Sheet: Garolite, 1/32″ Thick, Yellow, 36,000 psi Tensile Strength Rockwell M-110
• Compression Spring: 2.409″ OD, 5″ Free Length 214.928 lb Max Load, 87.188 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.586″ OD, 7″ Free Length 0.135″ Wire Dia, 43.754 lb Max Load, 11.501 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.703″ OD, 7″ Free Length 0.225″ Wire Dia, 143.723 lb Max Load, 34.132 lb/in Spring Rate, Music Wire
• Corner Chamfer End Mill: 20.00 mm Dia, 40.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
• Taper Length Drill Bit: 0.7656″ Dia, 118 ° Black Oxide Finish, 6″ Flute Length, RH Cut, Spiral Flute, Straight Shank, Series 525
• Compression Spring: 2.526″ OD, 5″ Free Length 205.519 lb Max Load, 80.19 lb/in Spring Rate, Music Wire
• Compression Spring: 1.293″ OD, 8″ Free Length 0.207″ Wire Dia, 226.369 lb Max Load, 91.335 lb/in Spring Rate, Music Wire
• Traffic Traffic Cone
• Compression Spring: 0.764″ OD, 9″ Free Length 0.105″ Wire Dia, 44.27 lb Max Load, 12.992 lb/in Spring Rate, Stainless Steel
• Miter Saws; Bevel: Double; Sliding: Yes; Blade Diameter Compatibility: 12; Maximum Speed: 3200 RPM; Maximum Bevel Angle - Left: ™0 ™ to 48 ™ ™; Maximum Bevel Angle - Right: ™0 ™ to 48 ™ ™; Positive Stops - Left: 0 ™, 15 ™, 22.5 ™, 31.6 ™, 45 ™ and 60 ™;
• Compression Spring: 0.823″ OD, 4.5″ Free Length 0.148″ Wire Dia, 101.794 lb Max Load, 101.657 lb/in Spring Rate, Stainless Steel
• Grooving Insert: TDITT K10, Solid Carbide Uncoated, Neutral, 0.157″ Cutting Width, Series TDIT-E (Full Radius)
• #4-40, 2.0619″ OAL, 3/16″ Across Flats, Nylon Male/Female Hex Circuit Board Standoff Fully Threaded, 1-7/8″ Body Length, 3/16″ Thread Length, 1/4″ Thread Depth, Grade 6/6, Uncoated
• Sheet: Natural Rubber, 1″ Thick, 24″ Wide, 36″ Long, Tan Durometer 40, Plain Backing
• Ball End Mill: 0.01″ Dia, 0.05″ LOC, 3 Flute, Solid Carbide 2-1/2″ OAL, 1/8″ Shank Dia, 30 ° Helix, AlTiN Coated, Single End
• Threading Insert:4 Size, TDGX Style, TT9080 Grade, Solid Carbide Coated Finish, 0.45 to 3.50 mm & 8 to 48 TPI, Series TDGX
• Corner Chamfer End Mill: 25.00 mm Dia, 55.00 mm LOC, 8 Flute, 0.08 mm Chamfer Width, Solid Carbide
• Compression Spring: 1.469″ OD, 3.25″ Free Length 0.177″ Wire Dia, 96.438 lb Max Load, 81.185 lb/in Spring Rate, Stainless Steel
• Reduced Shank Drill Bit: 55/64'' Dia, 1/2'' Shank Dia, 135 ™, Cobalt 6'' OAL, 3'' Flute Length, Bright/Uncoated Finish, Reduced Shank, Series 622
• Threading Insert:4 Size, TDGX Style, TT9080 Grade, Solid Carbide Coated Finish, 0.45 to 3.50 mm & 8 to 48 TPI, Series TDGX
• Compression Spring: 1.469″ OD, 6.75″ Free Length 0.135″ Wire Dia, 47.072 lb Max Load, 13.448 lb/in Spring Rate, Stainless Steel
• Die Drill Bit: 0.2420″ Dia, 140 °, Solid Carbide Bright Finish, 1-3/8″ Flute, 2-1/2″ OAL, Series 470
• Shrink-Fit Tool Holder & Adapter: HSK100A Taper Shank 8.5″ Projection, 2.76″ Nose Dia, 2.5″ Clamp Depth, Through Coolant
• Acid Neutralizer Pillow 12″ x 12″ 4/Pack
• Landscape Spreaders; Type: Tailgate; Frame Material: Stainless Steel; Spreader Type: Tailgate
• Sock: Chemical, 4' OAL, Polymer
• Compression Spring: 0.999″ OD, 3″ Free Length 0.177″ Wire Dia, 136.296 lb Max Load, 219.563 lb/in Spring Rate, Stainless Steel
• Compression Spring: 2.115″ OD, 6.5″ Free Length 0.225″ Wire Dia, 181.406 lb Max Load, 55.57 lb/in Spring Rate, Music Wire
• Compression Spring: 0.705″ OD, 9″ Free Length 0.105″ Wire Dia, 47.603 lb Max Load, 15.554 lb/in Spring Rate, Stainless Steel
• Manual Ball Valve: 3″ Pipe, Full Port, Stainless Steel 2-Piece, FNPT, 1,000 psi WOG
• Indexable Insert Drills; Drill Style: GTADP; Maximum Drill Diameter (Inch): 23/32; Drill Diameter (Decimal Inch): 0.7180; Maximum Drill Diameter (Decimal Inch): 0.7180; Drill Diameter (Inch): 23/32; Maximum Drill Depth (Decimal Inch): 18.8200; Maximum Dri
• Indexable Insert Drills; Drill Style: GTADP; Maximum Drill Diameter (Inch): 47/64; Drill Diameter (Decimal Inch): 0.7340; Maximum Drill Diameter (Decimal Inch): 0.7340; Drill Diameter (Inch): 47/64; Maximum Drill Depth (Decimal Inch): 18.8200; Maximum Dri