8 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459036
Manufacturer: Starrett
Mfg #: 59036

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 3/8 *Width: 7/8

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 3.3500

$471.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

EN2606NX11 6" X 11'

Item #: SE82EN2606NX11
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
•Actual Weight - 13.5000 •Dimensions - Height: 6.00 Length: 17.0 Width: 7.00

$429.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63756309
Manufacturer: Parlec
Mfg #: H63A-75SF6

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-75SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bullard Jaw - #HR-BUL-RJ

Item #: HF70HRBULRJ
Manufacturer: H & R
Mfg #: HR-BUL-RJ

Technical Specifications:
*Bolt size: 7/8 *Brand Name: H & R *Class: Lathe Chucks & Accessories *Dimension E: 5/8 *Dimension F: 3.250 *Dimension J: 3 *Dimension K: 2 *Jaw Length: 6-5/8 *Jaw Width: 3 *Overall Height: 4.00 *Type: Bullard Jaw

Description:
*Bullard Tooling *SOLD INDIVIDUALLY

Shipping Info:
*Actual Weight - 14.0000

$423.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 6 - Oil Hardening Flat Stock

Item #: LY5103214
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 30.9700 *Dimensions - Height: .500 Length: 36.0 Width: 6.00

$451.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAPTO C6 X TG 100-80MM

Item #: TE1214369110008
Manufacturer: Techniks
Mfg #: 143.691.10

Technical Specifications:
*Brand Name: Techniks

Description:

Shipping Info:
*Actual Weight - 1.0000

$468.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1X600 YDS 450EK ADH TRANSFER TAPE

Item #: LF5338587
Manufacturer: 3M
Mfg #: 0002120038

Technical Specifications:
•Brand Name: 3M

Description:

Shipping Info:
•Actual Weight - 4.5455

$349.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 20mm x 160mm - Shrink Fit Tool Holder

Item #: GM94H63M201609
Manufacturer: Parlec
Mfg #: H63A-M20SF

Technical Specifications:
*Bore Diameter: 20mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: H63A-M20SF160-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HAZ05 20V RECIP SAW

Item #: PD20DCS367P1
Manufacturer: DeWALT
Mfg #: DCS367P1

Technical Specifications:

Description:

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 9.3000 •Dimensions - Height: 9.68 Length: 16.7 Width: 4.68 •Additional handling -$15.00 per item

$423.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Backplate Dependent Chuck 8" D1-4 Fully Finished

Item #: HK3138789084P
Manufacturer: TMX
Mfg #: 3-878-9084

Technical Specifications:
*: " *: " *: M10 *: 3.252 *Brand Name: TMX *Chuck Diameter: 8 *Chuck Size: 8 *Chuck Style: Independent *Description: Fully Finished *For Chuck Size: 8 *Height: 1.811 *Model Number: 3-878-9084P *Mount: D1-4 *Thread Depth: " *Thru Hole: 1.969 *Weight: 6.834 lbs

Description:
*Fully finished to precisely fit TMX plain back chucks without any additional machining

Shipping Info:
*Actual Weight - 6.8343 *Addl Fee Under 70lb - $12.00 per item

$571.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

48" High Portable Convex Mirror Stand Only

Item #: KB2520135
Manufacturer: SeKure Domes
Mfg #: CVI-PS

Technical Specifications:
•Brand Name: SeKure Domes •Material: Steel •Mount: Portable Stand Ball Stud •Shape: Portable Stand •Size: 48" HIGH •Style: Portable Convex Mirrors

Description:
•Solid Portable Coverage For Blind Spots •Great For Vehicle Safety Inspections •Wheels Do Not Touch The Ground Until Tilted For Moving •Works With All Of Our Indoor Convex Models

Shipping Info:
•Actual Weight - 26.0000

$422.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

11 x 11 x 17'' (16 Compartments) - Steel Modular Parts Cabinet

Item #: SD5019416
Manufacturer: Akro-Mils
Mfg #: 19416

Technical Specifications:
•Brand Name: Akro-Mils •Depth: 11 •Height: 11 •Number of Compartments: 16 •Size: 4 x 2-1/8 x 10-9/16 •Type: Steel Modular Parts Cabinet •Width: 17

Description:
•Welded steel frames •Full width steel shelves for support •Curved finger grips at drawer front for ease of opening •Transparent window drawer •Keyhole slots in frame for easy wall mounting •Chip proof, baked enamel charcoal-gray finish •One label per drawer included

Shipping Info:
•Actual Weight - 18.2500 •Shipping Weight - 29.0000 •Dimensions - Height: 13.6 Length: 19.6 Width: 13.5

$422.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

11 x 11 x 17'' (15 Compartments) - Steel Modular Parts Cabinet

Item #: SD5019715
Manufacturer: Akro-Mils
Mfg #: 19715

Technical Specifications:
•Brand Name: Akro-Mils •Depth: 11 •Height: 11 •Number of Compartments: 15 •Size: 3-3/16 x 3-1/16 x 10-9/16 •Type: Steel Modular Parts Cabinet •Width: 17

Description:
•Welded steel frames •Full width steel shelves for support •Curved finger grips at drawer front for ease of opening •Transparent window drawer •Keyhole slots in frame for easy wall mounting •Chip proof, baked enamel charcoal-gray finish •One label per drawer included

Shipping Info:
•Actual Weight - 18.5350 •Shipping Weight - 28.0000 •Dimensions - Height: 14.2 Length: 19.5 Width: 14.0

$422.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DIN69871 50 ER32X100 B UNIQUE SHORT

Item #: TG604590787
Manufacturer: Tungaloy
Mfg #: 4590787

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:
*Actual Weight - .0090

$410.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

11 x 11 x 17'' (9 Compartments) - Steel Modular Parts Cabinet

Item #: SD5019909
Manufacturer: Akro-Mils
Mfg #: 19909

Technical Specifications:
•Brand Name: Akro-Mils •Depth: 11 •Height: 11 •Number of Compartments: 9 •Size: 5-3/16 x 3-1/16 x 10-9/16 •Type: Steel Modular Parts Cabinet •Width: 17

Description:
•Welded steel frames •Full width steel shelves for support •Curved finger grips at drawer front for ease of opening •Transparent window drawer •Keyhole slots in frame for easy wall mounting •Chip proof, baked enamel charcoal-gray finish •One label per drawer included

Shipping Info:
•Actual Weight - 16.1500 •Shipping Weight - 29.0000 •Dimensions - Height: 13.6 Length: 19.5 Width: 13.5

$422.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DIN69871 50 ER25X100 B UNIQUE SHORT

Item #: TG604511673
Manufacturer: Tungaloy
Mfg #: 4511673

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:
*Actual Weight - .0090

$428.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

25-2041J WFB DIAL INDICATOR

Item #: MV7056805
Manufacturer: Starrett
Mfg #: 56805

Technical Specifications:
•Brand Name: Starrett •Model Number: 25-2041J

Description:

Shipping Info:
•Actual Weight - 1.1000

$448.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

449MAZ-75R DEPTH GAGE

Item #: MV7056636
Manufacturer: Starrett
Mfg #: 56636

Technical Specifications:
•Brand Name: Starrett •Model Number: 449MAZ-75R

Description:

Shipping Info:
•Actual Weight - 1.4000

$448.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8-11 x 3 - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH8010048
Manufacturer: Holo-Krome
Mfg #: 72280

Technical Specifications:
*Box Qty.: 25 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 1/2 *Length: 3 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: 5/8-11 *Thread: Coarse

Description:
*Socket Head Cap Screws *UNRC Coarse Thread *Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance *Socket cap screws are internally wrenched, and are black finished in appearance *Heat treated alloy steel *Complete traceability *Quality controlled products machined to ANSI/ASTM Standards *Heat treated alloy, unified 3A thread fit

Shipping Info:
*Actual Weight - .3360 *Dimensions - Height: 3.90 Length: 9.40 Width: 4.50

$4.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Riser Block for Milling Machine - 4" For Lagun

Item #: JF710370375
Manufacturer: High Quality Tools
Mfg #:

Technical Specifications:
•Brand Name: High Quality Tools •Class: Milling Machine Accessories •Dimension A: 4 •Dimension B: 12.518 •Dimension C: 6.750 •Dimension D: 9.626 •Dimension E: 12.521 •For Use With: Lagun •Model Number: 037-0375 •Type: Riser Block for Milling Machine •Weight: 44 lbs

Description:
•Bolts are required for installation •Spiders are optional •1701 & 1702 For old style 9" x 48" Bridgeport only •All 9" x 49" Bridgeport use millport model •Millport also fits a variety of other Taiwan type mills such as Acer, Alliant & more •Risers are light gray color only - DOES NOT match Bridgeport gray color

Shipping Info:
•Actual Weight - 44.0000

$458.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It