ET01 ET03 ET02 - (25001 Products)
Mag Lifting Device- Flat Steel Only- 400lbs. Hold Cap
Item #: JY50MP338
Manufacturer: Mag-Mate
Mfg #: CL0400
Technical Specifications:
*Brand Name: Mag-Mate
*Holding Capacity (lbs): 400
*Length: 7-3/4
*Weight: 21 lbs
*Width: 7-1/4
Description:
*Creative Lift¬ Ceramic Lift Magnet
*Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains.The patented Non-Marring Roller Cam Release will easily release parts without gouging your valuable materials (U.S. Patent: 6,471,273 B1). F.O.B MI
*Spring return handle
*Less torque required to release load
*"Jack Screw", Secondary Release
*Durable Stainless Steel Casing
*Heat Resistant up to 300ÁF (148ÁC)
*3:1 Design Factor
*Conforms toASME B30.20 Standards
* Maximum sheet length for specified material thicknesses are selected due to the sag characteristics of the specified length
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 23.3000
*Dimensions - Height: 7.90 Length: 16.4 Width: 10.5
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
EN2806TX9 6" X 9' ENDLESS
Item #: SE82EN2806TX9
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
•Actual Weight - 13.9000
•Dimensions - Height: 6.00 Length: 16.0 Width: 6.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M38.0-1.50 6G LH GO/NO-GO SET PLUG
Item #: EY52372577530
Manufacturer: Vermont Gage
Mfg #: 372577530
Technical Specifications:
•Brand Name: Vermont Gage
Description:
Shipping Info:
•Actual Weight - 2.5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 1/2"-95 - Shrink Fit Holder
Item #: TE1239314
Manufacturer: Techniks
Mfg #: 39314
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Techniks
*European-DIN Tool Shank Range: 12.7mm
*Gage Length: 90mm
*Outside Diameter: 3.94
*Shank: 1/2
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 1/2
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3375
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 1/8"-3.54" - Shrink Fit Holder
Item #: TE1239304
Manufacturer: Techniks
Mfg #: 39304
Technical Specifications:
*Bore Diameter: 1/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 3.2mm
*Gage Length: 3.54
*Outside Diameter: 3.94
*Shank: 1/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 1/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3125
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 63A 1"-4.0" - Face Mill Arbor
Item #: TE1293520
Manufacturer: Techniks
Mfg #: 93520
Technical Specifications:
*Arbor Thread: 1/2-20UNF
*Brand Name: Techniks
*Coolant Supply: Coolant-thru Spindle
*Flange Diameter: 2.48
*Gage Length: 4.00
*Key Size: .375
*Pilot Diameter: 1.0
*Pilot Length: .687
*Shank: HSK63A
*Type: Precision HSK Face Mill Arbor
Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life
*Each arbor is lab certified for dimensional accuracy
*The taper is ground to AT3 tolerance for maximum spindle contact
*Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw
Shipping Info:
*Actual Weight - .2968
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M38.0-1.50 6G STL GO/NO-GO SET PLUG
Item #: EY52372177530
Manufacturer: Vermont Gage
Mfg #: 372177530
Technical Specifications:
•Brand Name: Vermont Gage
Description:
Shipping Info:
•Actual Weight - 2.5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK63A 10MM SHRINK FIT HOLDER
Item #: GM76500834
Manufacturer: Lyndex
Mfg #: H63A-SF10-
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 5/8"-100mm - Shrink Fit Holder
Item #: TE1239318
Manufacturer: Techniks
Mfg #: 39318
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 15.9mm
*Gage Length: 100mm
*Outside Diameter: 3.94
*Shank: 5/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 5/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 1-1/4"-120 - Shrink Fit Holder
Item #: TE1239326
Manufacturer: Techniks
Mfg #: 39326
Technical Specifications:
*Bore Diameter: 1-1/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 31.8mm
*Gage Length: 120mm
*Outside Diameter: 3.94
*Shank: 1-1/4
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 1-1/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .4312
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 63A 1-1/4"-2.75" - Face Mill Arbor
Item #: TE1293502
Manufacturer: Techniks
Mfg #: 93502
Technical Specifications:
*Arbor Thread: 5/8-18UNF
*Brand Name: Techniks
*Coolant Supply: Coolant-thru Spindle
*Flange Diameter: 2.48
*Gage Length: 2.75
*Key Size: .5
*Pilot Diameter: 1-1/4
*Pilot Length: .687
*Shank: HSK63A
*Type: Precision HSK Face Mill Arbor
Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life
*Each arbor is lab certified for dimensional accuracy
*The taper is ground to AT3 tolerance for maximum spindle contact
*Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw
Shipping Info:
*Actual Weight - .2687
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 3/4"-105 - Shrink Fit Holder
Item #: TE1239320
Manufacturer: Techniks
Mfg #: 39320
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 19.1mm
*Gage Length: 105mm
*Outside Diameter: 3.94
*Shank: 3/4
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 3/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3750
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 5/16"-85 - Shrink Fit Holder
Item #: TE1239308
Manufacturer: Techniks
Mfg #: 39308
Technical Specifications:
*Bore Diameter: 5/16
*Brand Name: Techniks
*European-DIN Tool Shank Range: 7.9mm
*Gage Length: 85mm
*Outside Diameter: 3.94
*Shank: 5/16
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 5/16
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3250
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#10 Jarno CNC Full Carbide Tipped - Large Point - Dead Center
Item #: HK2269210
Manufacturer: Riten
Mfg #: 69210
Technical Specifications:
*Accuracy: .0001
*Brand Name: Riten
*Description: Jarno Taper
*Head Length: 2-11/16
*Mount: 10 Jarno
*Neck Width: 1/2
*Point Diameter: 1-3/4
*Point Style: Carbide Tipped-Large Point
*Style: CNC Full
*Tip Diameter: 1-1/4
*Type: Dead Centers
Description:
*Large Carbide Point Imperial Dead Center
*Accuracy guaranteed to ±.00005
*Covers the widest range of center hole sizes
*Eliminates the need for special centers
*Increased center hole range
*Extra regrinds and longer wear
*Also available in other tapers
Shipping Info:
*Actual Weight - 2.7500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 63A 3/4"-2.0" - Face Mill Arbor
Item #: TE1293500
Manufacturer: Techniks
Mfg #: 93500
Technical Specifications:
*Arbor Thread: 3/8-24UNF
*Brand Name: Techniks
*Coolant Supply: Coolant-thru Spindle
*Flange Diameter: 2.48
*Gage Length: 2.00
*Key Size: .313
*Pilot Diameter: 3/4
*Pilot Length: .687
*Shank: HSK63A
*Type: Precision HSK Face Mill Arbor
Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life
*Each arbor is lab certified for dimensional accuracy
*The taper is ground to AT3 tolerance for maximum spindle contact
*Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw
Shipping Info:
*Actual Weight - .1437
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 63A 1-1/4"-4.0" - Face Mill Arbor
Item #: TE1293530
Manufacturer: Techniks
Mfg #: 93530
Technical Specifications:
*Arbor Thread: 5/8-18UNF
*Brand Name: Techniks
*Coolant Supply: Coolant-thru Spindle
*Flange Diameter: 2.48
*Gage Length: 4.00
*Key Size: .5
*Pilot Diameter: 1-1/4
*Pilot Length: .687
*Shank: HSK63A
*Type: Precision HSK Face Mill Arbor
Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life
*Each arbor is lab certified for dimensional accuracy
*The taper is ground to AT3 tolerance for maximum spindle contact
*Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw
Shipping Info:
*Actual Weight - .3218
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 7/16"-95 - Shrink Fit Holder
Item #: TE1239312
Manufacturer: Techniks
Mfg #: 39312
Technical Specifications:
*Bore Diameter: 7/16
*Brand Name: Techniks
*European-DIN Tool Shank Range: 11.1mm
*Gage Length: 95mm
*Outside Diameter: 3.94
*Shank: 7/16
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 7/16
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3375
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 SK25 SLIM CHUCK MAX 15000RPM
Item #: GM75BT40SK2575
Manufacturer: Lyndex
Mfg #: BT40-SK25-
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Overhead Drum Lifter - #DRUM-GRAB - 2200 lbs Lifting Capacity
Item #: RV54DRUMGRAB
Manufacturer: Vestil
Mfg #: DRUM-GRAB
Technical Specifications:
•Brand Name: Vestil
•Description: Secure Overhead
•Holding Device: Hoist
•Lifting Capacity: 2200 lbs
•Lifting Position: Vertical/Horizontal
•Type: Drum Lifter
Description:
•Designed to securely lift closed & open-head 55 gallon steel drums with lid
•One person design makes for quick and easy operation
•Three-arm ductile-iron design offers maximum strength and simplicity
•Narrow profile easily picks up drums packed close together
Shipping Info:
•Actual Weight - 19.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 63A 3/4"-4.0" - Face Mill Arbor
Item #: TE1293510
Manufacturer: Techniks
Mfg #: 93510
Technical Specifications:
*Arbor Thread: 3/8-24UNF
*Brand Name: Techniks
*Coolant Supply: Coolant-thru Spindle
*Flange Diameter: 2.48
*Gage Length: 4.00
*Key Size: .313
*Pilot Diameter: 3/4
*Pilot Length: .687
*Shank: HSK63A
*Type: Precision HSK Face Mill Arbor
Description:
*Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life
*Each arbor is lab certified for dimensional accuracy
*The taper is ground to AT3 tolerance for maximum spindle contact
*Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw
Shipping Info:
*Actual Weight - .2187
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It