2.1875" For 1.968 - 2.362" / 50 - 60mm - Master Setting Ring

Item #: GG4521451
Manufacturer: Flexbar
Mfg #: 21451

Technical Specifications:
•Brand Name: Flexbar •For Use With: 1.968-2.362'' / 50-60mm •Model Number: 21451 •Size: 2.1875 •Total Range: 2.1875" •Type: Master Setting Ring Bilateral Class Z Steel

Description:
•Master setting ring bilateral class Z steel

Shipping Info:
•Actual Weight - 1.0000

HSK100 5/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100626309
Manufacturer: Parlec
Mfg #: H100A-62SF

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-62SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

A101M.0.63.080.63 NCT EXTENSION

Item #: WC145007347
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
*Actual Weight - 3.9600

HSK100 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100756309
Manufacturer: Parlec
Mfg #: H100A-75SF

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-75SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

HSK100 3/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100386309
Manufacturer: Parlec
Mfg #: H100A-38SF

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-38SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

AK300.7.100.100.20.HSK COLLET CHUCK

Item #: WC145043229
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
*Actual Weight - 10.8213

HSK100 1/2 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100506309
Manufacturer: Parlec
Mfg #: H100A-50SF

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-50SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

CAT40 SK6 SLIM CHUCK HIGH SPEED

Item #: GM75T40SK6150UP
Manufacturer: Lyndex
Mfg #: CAT40-SK6-

Technical Specifications:
*Brand Name: Lyndex

Description:


Shipping Info:
*Actual Weight - .9900

HSK100A 1/4 SHRINK FIT HOLDER

Item #: GM76500683
Manufacturer: Lyndex
Mfg #: H100A-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:


Shipping Info:
*Actual Weight - .9900

HSK100 1 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H100106309
Manufacturer: Parlec
Mfg #: H100A-10SF

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H100A-10SF630-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

GROUND PAD FOR T8430DR-12'X12' BERM

Item #: LC50T8430GP
Manufacturer: Eagle
Mfg #: T8430GP

Technical Specifications:
•Brand Name: Eagle

Description:


Shipping Info:
•Actual Weight - 30.0000

W-2929-25 SUPPLIED AIR HOSE

EARPLUGS 391-1100 ONE TOUCH REFILL

Item #: KB3519102
Manufacturer: 3M
Mfg #: 1008052919

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 9.9350

EN2606NX12 6" X 12'

Item #: SE82EN2606NX12
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 14.7000 •Dimensions - Height: 6.00 Length: 18.0 Width: 7.00

Tongue & Groove Jaw - HD 1-Step Rev Hard Jaw

Item #: HF7028HTGRJSS
Manufacturer: H & R
Mfg #: HR-28-HTGR

Technical Specifications:
*Bolt size: 7/8 *Brand Name: H & R *Class: Lathe Chucks & Accessories *Dimension B: 3.750 *Dimension C: 3 *Dimension D: .500 *Dimension E: .750 *Dimension F: 3.000 *Dimension J: 3-3/4 *Dimension L: 2.000 *For Chuck Size: 24 - 36 *Jaw Length: 6.960 *Number of Holes: 2 *Style: Heavy Duty 1-Step Rev Hard Jaw *Type: Tongue & Groove Jaw

Description:
*American Standard Tongue & Groove (A.S.T.G.) Heavy Duty Reversible Hard Jaw *For Bergman, Bison, Buck, Cushman, Huron, Rohm, Forkhardt, Pratt Burnerd America, SCA, SP, W & S, Nobel & Yuasa *PRICED EACH SOLD ONLY IN MATCHED SETS OF 3

Shipping Info:
*Actual Weight - 11.7000

C6SVJCR45065-16 TUNGCAP HOLDER

Item #: TG206885206
Manufacturer: Tungaloy
Mfg #: 6885206

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - 3.0190

Machinist Clamping Set - #20415; 5/8-11 Stud Size; 11/16 T-Slot Size

Item #: SG5020415
Manufacturer: Te-Co
Mfg #: 20415

Technical Specifications:
*Brand Name: Te-Co *Step Block & Clamp Set Number: 21003 *Stud Size: 5/8-11 *T-Nut Number: 41415 *Table T-Slot Size: 11/16 *Type: Machinist Clamping Set

Description:
*Machinist Clampin Sets Contains: *6 Flange nuts *6 T-Slot nuts *4 Coupling nuts *6 Step blocks *6 Serrated end clamps *1 T-Slot cleaner *24 Studs; 4 each of 3, 4, 5, 6, 7 & 8" long *Bridgeport Set *1 Holder

Shipping Info:
*Actual Weight - 28.7500 *Dimensions - Height: 5.50 Length: 18.0 Width: 9.30

3/4-10 x 1-1/4 - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH8012020
Manufacturer: Holo-Krome
Mfg #: 72302

Technical Specifications:
*Box Qty.: 25 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 5/8 *Length: 1-1/4 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: 3/4-10 *Thread: Coarse

Description:
*Socket Head Cap Screws *UNRC Coarse Thread *Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance *Socket cap screws are internally wrenched, and are black finished in appearance *Heat treated alloy steel *Complete traceability *Quality controlled products machined to ANSI/ASTM Standards *Heat treated alloy, unified 3A thread fit

Shipping Info:
*Actual Weight - .2840

Tool No. 5 Taper Toolholder 60EA

Item #: GG35D60EA5
Manufacturer: Dorian
Mfg #: 01872

Technical Specifications:
*Brand Name: Dorian *Description: Morse Taper *Series: D60EA *Tool Holder Capacity: 5 MT

Description:
*For taper holder as a drill chuck reamer, to be used with power feed.

Shipping Info:
*Actual Weight - 14.7500

UU2804NX15 4" X 15'

Item #: SE80UU2804NX15
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 15.2000 •Dimensions - Height: 4.00 Length: 17.0 Width: 8.00