#ELM1000V - EZ-LIFT Vertical Lifter ELM-1000 Series

Item #: TE12ELM1000V
Manufacturer: Techniks
Mfg #: ELM-1000V

Technical Specifications:
*Brand Name: Techniks *Height: 10 *Holding Capacity (lbs): 2200 *Length: 8.5 *Lift Capacity Round (lbs)(kg): 990 lbs / 990 Kgs. *Lift Capacity Sheet (lbs)(kg): 2200 Lbs. /1000 kg. *Model Number: ELM-1000V *Rated Lift: 3.5 times maximum *Type: Permanent Rare-Earth Magnet *Weight: 128 lbs *Width: 12.75

Description:
*EZ-Lift Vertical Lifters allow for fast loading for vertical transport without straps or slings * One person can safely load and unload. Includes ELM-1000 lifting magnet

Shipping Info:
*Actual Weight - 128.0000 *Dimensions - Height: 10.0 Length: 9.00 Width: 13.0

Fine Pole Compound Magnetic Sine Plate - #MSPC66FP; 6 x 6 x 5-3/8''

Item #: NJ50MSPC66FP
Manufacturer: Suburban
Mfg #: MSPC-66-FP

Technical Specifications:
*Brand Name: Suburban *Center Distance of Rolls: 5.000 within .0002 *Size: 6 x 6 x 5-3/8 *Square & Parallel: .0002 *Type: Fine Pole Compound Magnetic Sine Plate *Weight: 48 lbs

Description:
*Ceramic permanent magnetic chuck *Removable handle for ON/OFF control, side rails, end rails all included *Strap locks sine plate securely. *.200 minute angle steps with .0002 and .0003 tolerance in squareness, parallelism and roll center distances *Models with the suffix "S0, S1 or S2" are part of the SineSet® System *Can be removed, allowing the individual use of both the compound sine plate and magnetic chuck and allowing other products with the same part number suffix to bolt directly to the sine plate *Chuck not removable -NJ50MSPC66 & NJ50MSPC66FP

Shipping Info:
*HAZ 5C *UPS Ground - No Additional Shipping Charges *UPS Air - Cannot Ship Air *Commercial Truck - Call for Shipping Charges *Note: The additional charges are controlled by UPS and are subject to change. *Actual Weight - 48.0000 *Dimensions - Height: 11.0 Length: 11.0 Width: 11.0 *Additional handling - $15.00 per item

DRO203 10 x 78 Lathe Kit 2 Axis

Item #: HC02T2031078
Manufacturer: Acu-Rite
Mfg #: T203-1078

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T203-1078 •Series: 203 •Travel: 10 x 78 •Type: Digital Readout System

Description:
•DRO203 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •16 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Multiple Datums •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 52.0000

DRO203 12 x 78 Lathe Kit 2 Axis

Item #: HC02T2031278
Manufacturer: Acu-Rite
Mfg #: T203-1278

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T203-1278 •Series: 203 •Travel: 12 x 78 •Type: Digital Readout System

Description:
•DRO203 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •16 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Multiple Datums •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 57.0000

700MM CERA STRAIGHT MASTER

Item #: MT80311-305-33
Manufacturer: Mitutoyo
Mfg #: 311-305-33

Technical Specifications:
•Brand Name: Mitutoyo

Description:


Shipping Info:
•Actual Weight - 30.0000

#52900 - 3" - Air-Powered Abrasive Belt Tool

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

80 Gal Two Stage Air Compressor, Vertical, 175 PSI

Item #: PT60IV7538075
Manufacturer: Industrial Air
Mfg #: IV7538075

Technical Specifications:
•AFCM: 22.1 SCFM @ 100 PSI 21.2 SCFM @ 175 PSI •Brand Name: Industrial Air •Dimensions: 40.25 x 32.25 x 80 •Max PSI: 175 •Model No.: IV7538075 •Motor: 7.5HP, 230V, 3PH •Start-Up Oil Kit: Maintenance Kit Available •Starter Included: Mag Starter Included •Style: Vertical •Tank: 80 •Weight: 715 lbs

Description:
•Features & Benefits: Patented Pump Design Provides for a Cooler Running Pump •Patented piston design for improved compression efficiency •Cast iron cylinder head with patented deep-grove directional cooling fins •Precision bored cylinders with patented asymmetrical cooling fins •Patented cast iron flywheel design with large extended fins for improved cooling of pump and low pump RPM •Baldor 3 phase industrial class electric motor •4 pole, 1770 RPM, UL certified, NEMA rated •Equipped with pre-wired and mounted magnetic starter •ASME certified tank •Two Year Limited Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 715.0000 •Dimensions - Height: 82.0 Length: 45.0 Width: 32.0

C55703C32288 BORING BAR

Item #: FF8141691
Manufacturer: Sandvik Coromant
Mfg #: 5729127

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 5.6320

E-A-R 340-4014 CORDED EARPLUGS

Item #: KB3540053
Manufacturer: 3M
Mfg #: 1008052940

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 30.3730

DRO203 12 x 72 Lathe Kit 2 Axis

Item #: HC02T2031272
Manufacturer: Acu-Rite
Mfg #: T203-1272

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T203-1272 •Series: 203 •Travel: 12 x 72 •Type: Digital Readout System

Description:
•DRO203 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •16 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Multiple Datums •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 55.0000

48X60 YDS 9485PC CLR ADH TRANS TAPE

Item #: LF5337911
Manufacturer: 3M
Mfg #: 0002120037

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 33.7674

Blast Cabinet with Abrasive Separators-Split Level - #4824D 48W x 24D x 24H Tub Dimensions

Item #: PA504824D
Manufacturer: Trinco
Mfg #: 4824D

Technical Specifications:
•Abrasive Separator: 300 CFM •Brand Name: Trinco •Cabinet Dimensions: 53W x 38D x 65H •Dust Collection System: Deluxe •Model Number: 4824D •Operating Pressure: 25 CFM @ 80 PSI •Side Door Opening: 11 x 11 •Tub Dimensions: 48W x 24D x 24H •Type: Blast Cabinet with Abrasive Separators-Split Level •Weight: 740 lbs •Window Opening: 48 x 24

Description:
•Available on Master Models 36 and larger •These units are equipped with 600 CFM abrasive separator •Features include superior dust filtration, a drawer for dust disposal and a shaker mechanism for efficient bag cleaning (16 tubular filter bags) which replaces standard dust bag on abrasive separators, air vibrator, water filter, and blow off gun •400 CFM pull through enclosed dust collector •1 Year Warranty •F.O.B. WARREN, MI

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 430.0000

KEN70KX25 ORANGE ENDLESS

Item #: SE87KEN70KX25
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 42.5000 •Dimensions - Height: 24.0 Length: 15.0 Width: 15.0

VM300 VACMAGIC COMPLETE SYSTEM

Item #: SG7045101
Manufacturer: Mitee-Bite
Mfg #: 45101

Technical Specifications:


Description:
*VacMagic® VM300 *Capabilities include traditional vacuum applicaitons and the ability to perform as a rock solid pallet changer

Shipping Info:
*Actual Weight - 63.0000

#54-551-010 - .037-.096" / .95 - 2.45mm Measuring Range- .01; .001; .0005mm Switchable Resolution Fowler MicroGage Set

Item #: NA5554551010
Manufacturer: Fowler
Mfg #: 54-551-010

Technical Specifications:
•Accuracy: .001mm •Brand Name: Fowler •Model Number: 54-551-010 •Resolution: 0.01,0.001,0.0005mm Switchable •Total Range: .037 - .096" / .95 - 2.45 •Type: 2 Point Bore Gage Set

Description:
•System range: .040" - .250" / 1 - 6mm •Switchable resolution .01, .001, .0005mm •Data output: RS232 or USB proximity sensor •Repeatability: .001mm •Sets include setting rings •UKAS certificates as standard with all setting rings •Depth stops available

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 4.0000 •Additional handling -$15.00 per item

58.69X17.28 1004 MULTI LAYER FILM

Item #: LF5371417
Manufacturer: 3M
Mfg #: 0005111571

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 35.8500

M20 - 2.50 x 200 - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH8060200
Manufacturer: Holo-Krome
Mfg #: 76543

Technical Specifications:
*Box Qty.: 10 *Brand Name: Holo-Krome *Coating: Black Finish *Hex Key: 17 mm *Length: 200 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: M20 - 2.50 *Thread: Metric

Description:
*Ideal for precision assembly work with close tolerances, and applications needing a well-tooled appearance *Supplies greater tensile strength than equivalent sizes of grade 8.8 and 10.9 socket cap screws *Metric socket cap screws are internally wrenched, and are black finished in appearance *Grade 12.9 heat treated alloy steel

Shipping Info:
*Actual Weight - 1.2280

10" x 21" Bench Lathe 115V, 1PH

Item #: JB559684509
Manufacturer: Palmgren
Mfg #: 9684509

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 4-3/4 •Distance Between Centers: 21-5/8 •Model Number: TU2506 •Motor: 1HP, 115V, 1PH •Mount: 4MT •Spindle Speed (RPM): 150-2400 •Spindle Taper: 4MT •Swing: 10 •Type: Bench Lathe •Weight: 343 lbs

Description:
•Palmgren's 10" bench model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines •Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning •All Palmgren lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops •EACH LATHE COMES STANDARD WITH: 3 jaw lathe chuck, Safety chuck and tool post guards, 4 way tool post, Centers, Chip tray, Precision thrust and ball bearings in the head stock •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 343.0000

K1000-200-7-1 K-10KN-200MM STROKE

Item #: MA48K100020071
Manufacturer: De-Sta-Co
Mfg #: K1000-200-

Technical Specifications:
*Brand Name: De-Sta-Co

Description:


Shipping Info:
*Actual Weight - 14.1120

Proto® 1" Drive 29 Piece Socket Set - 12 Point

Item #: KP4211365
Manufacturer: Proto
Mfg #: J57104A

Technical Specifications:
•Brand Name: Proto •Drive: 1 •Finish: Satin •Model Number: J57104A •Number of Pieces: 29 •Points: 12 •Set Includes: 12 PT: (21) 1-1/16-3-1/2"; (2) Extension, (1) Sliding Drive Plug, (1) Ratchet, (2) Hinge Handle (1) Set Box

Description:
•Proto® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials •The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fast

Shipping Info:
•Actual Weight - 29.6900 •Dimensions - Height: 4.90 Length: 24.3 Width: 6.00