HARRINGTON 2 TON 10' LIFT

Item #: RN51NER020L10
Manufacturer: Harrington
Mfg #: NER020L-10

Technical Specifications:
•Brand Name: Harrington •Capacity: 2 •Headroom: 22.6 •Lift Height (ft): 10 •Lifting Speed: 14 •Load Chain Diameter: 10.2mm •Model Number: NER020L-10 •Motor: 2.4HP, 208/230/460V, 3PH •Rated Load: 2 Ton •Type: Electric Chain Hoist •Weight: 161 lbs

Description:


Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 161.0000

Proto® Torque Multiplier 3200 ft-lbs

Item #: KP4221115
Manufacturer: Proto
Mfg #: J6232CERT

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 19-19/32 •Model Number: J6232CERT

Description:
•Maximum rated input: 173 ft-lbs (235 Nm).•Maximum rated output: 3200 ft-lbs (4338 Nm). •Standard torque accuracy is +/- 5% of reading. •Reaction system: tubular reaction bar. •Gear system: two stage planetary. •Angle of turn protractor: 5° increments. •Anti-backlash device: self-contained, 3 position. •Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.

Shipping Info:
•Actual Weight - 22.3400 •Dimensions - Height: 5.20 Length: 16.1 Width: 7.50

18" Gear Head Drill Press, 230V, 3PH

Item #: JB559680224
Manufacturer: Palmgren
Mfg #: 9680224

Technical Specifications:
•Brand Name: Palmgren •Model Number: 9680224 •Motor: 1-1/2HP, 240V, 3PH •Range of Speeds: 90 - 3480 RPM •Spindle Taper: 3MT •Spindle Travel: 5 •Swing: 18 •Type: Gear Head Drill Press •Weight: 405 lbs

Description:
Features: •Wide speed range with 8 different speeds •Simple knob selectors •Fully enclosed machine tool spindle •Quick release drill ejector •Front mounted control panel •Forward & reverse spindle switch •T-slotted production table and base •Rack and pinion table raiser •Front mounted dial adjusted work stop •Interlocking chuck guard •Work light - Model 9680223 •Model 9680224 Bench Top •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 405.0000

#ELM3000 - 3000KG/6600 lbs Lifting Magnet

Item #: TE12ELM3000
Manufacturer: Techniks
Mfg #: ELM-3000

Technical Specifications:
*Brand Name: Techniks *Height: 15.7 *Height to Hook: 8.7 *Holding Capacity (lbs): 6600 *Length: 22.3 *Lift Capacity Round (lbs)(kg): 2970 lbs *Lift Capacity Sheet (lbs)(kg): 6600lbs *Model Number: ELM-3000 *Rated Lift: 3.5 times maximum *Type: Permanent Rare-Earth Magnet *Weight: 399 lbs *Width: 8.5

Description:
*Use the EZ-LIFT magnetic lifters to move plate steel, block or round steel, and iron material in your shop * Super-powerful "rare earth" neodymium iron boron magnet requires no electricity to perform material lifting *Perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc.

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 439.0000 *Dimensions - Height: 20.0 Length: 13.0 Width: 28.0

ISGZ3400TLK- Inverse Kit

Item #: GM285051052
Manufacturer: Bilz
Mfg #: 5051052

Technical Specifications:
*Brand Name: Bilz *Description: Contains Special Coil, Stop Block, Extension *Type: Inverse Kit

Description:


Shipping Info:
*Actual Weight - 8.0000

Vertical Bandsaw - #KB363; 8 x 14'' Capacity; 1HP, 3PH, 220V Motor

Item #: RF66KB363
Manufacturer: PRM
Mfg #: :

Technical Specifications:
•Bed Height: 7-7/8 •Blade Length: 9' 5" •Blade Speeds: 70 - 280 SFPM •Blade Widths: 5/8 •Brand Name: PRM •Capacity (in.): 8 x 14 •Floor Space Required (L x W x H): 35-1/2 x 18-3/4 x 67-3/4 •Model Number: KB36 •Motor: 1HP, 220V, 3PH •Table Size: 19-1/2 x 15-3/4 •Throat: 14 •Type: Vertical Bandsaw •Weight: 660 lbs

Description:
•Light to heavy duty vertical bandsaws for most applications •Variable speed •V-Type saw guides & inserts •Blade welder with integrated annealing unit •Blade shear & grinder •Chip blower & jet •Low voltage worklight •15° Four-way tilt table •Low voltage controls •One blade & blade guard •Tool box •Complete instruction & parts manual •KB45 and KV50 have blade speed tachometer and blade tension indicator •Completely guarded •Magnetic controls with low voltage transformer •1 Year Warranty Parts •F.O.B. WARREN, MI

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 660.0000

Vertical Electric Tapping Machine; 0-9/16" Range

Item #: JD50R020100A
Manufacturer: Roscamat
Mfg #: R020100A

Technical Specifications:
*Brand Name: Roscamat *Description: Vertical *Reach: 30.12 *Speed: 300 *Tap Range (Fractional): #0 - 9/16 *Tap Range (Metric): M2-M14 *Torque (ft/lbs): 25 *Trade Name: Mosquito *Weight: 33 lbs

Description:
*Articulated arm *High frequency electric motor single-phase, 110V *Speed control variator *Base elevator *Height: 20.28" *Excellent for helicoil insertion

Shipping Info:
*Actual Weight - 33.0000

Hand Operated Hydraulic Press - 25H - 25 Ton Capacity

Item #: RK5007001
Manufacturer: Dake
Mfg #: 07001

Technical Specifications:
•Base: 30 x 42-1/2 •Brand Name: Dake •Capacity (tons): 25 •Height: 76 •Maximum Ram To Table: 39 •Maximum Work Arbor: 5-3/16 •Maximum Work Height: 39 •Maximum Work Width: 33-1/2 •Minimum Ram To Table: 4 •Model Number: 25H •Ram Travel (in): 5 •Table Travel: 35 •Type: Hand Operated Hydraulic Press •Weight: 450 lbs •Width Between Uprights: 33-1/2

Description:
•Hand operation for economical performance. •By-pass hole prevents excessive ram extension. •Rapid screw traverse of ram permits quick, easy movement of the ram by means of a convenient handwheel. Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the valve. •Adjustable table with self-locking hoist •Proudly Made in the USA •1 Year Warranty on all Dake Presses •F.O.B. GRAND HAVEN, MI

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 450.0000 •Shipping Weight - 740.0000 •Dimensions - Height: 43.0 Length: 92.0 Width: 26.0 •An additional $75.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.

JET-5000, 1-1/2" Square Drive Impact Wrench, D-Handle

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DRO102 16 x 110 Lathe Kit 2 Axis

Item #: HC01T1021692
Manufacturer: Acu-Rite
Mfg #: T102-1692

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T102-1692 •Series: 102 •Travel: 16 x 110 •Type: Digital Readout System

Description:
•DRO102 •7" TFT Color Display •USB Type C Data Interface •Feed Rate Display •Mulitple Language Supports •Absolute/Incremental •Help Function •Zero Reset •Instant inch/mm Conversion •Counter Diagnostics •Encoder Input Linear or Rotary •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 62.0000

Proto® 1" Drive Dial Electronic Torque Wrench 200-2000 ft-lbs

Item #: KP4220255
Manufacturer: Proto
Mfg #: J6351

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Head Height: 5 •Length: 125 •Model Number: J6351 •Width: 4

Description:
•Extended operation range in ft-lb and Nm units. •Precision Accuracy: + / - 1% in BOTH directions. •Accuracy valid from 10% to 100% of full scale. •Large easy to read digits. •Patented rotary bezel. LCD and key pad rotate both ways, up to 359 degrees for easy viewing. •Torque target zone adjustable 1% to 10% indicates when the desired torque limit is approaching.– Yellow light indicates the low end of the zone– Green light and buzzer sounds when the target is reached– Red Light with intermittent buzzer indicates over-torqued •One button target torque setting. •Ergonomically designed for user comfort. •Operates on standard 9 volt battery. •Torsion drive strain gauge technology improves accuracy.– Users can pull on the handle anywhere and still maintain accuracy. •Built on durable chrome body (not painted) with nylon-6 rotary bezel. •Rotary dial is shrouded with metal walls to protect display. •Peak, hold and track modes standard. •Fast sampling rate helps maintain high accuracy during torque applications. •Easy to use by production line or quality control inspector. •Meets or exceeds ASME B107.28

Shipping Info:
•Actual Weight - 42.4900 •Dimensions - Height: 7.00 Length: 32.0 Width: 10.5

Sheet Metal Hand Brake - #N4812 - 49'' Working Length - 12 Gauge Capacity (Mild Steel)

Item #: PK55N4812
Manufacturer: National
Mfg #: N4812

Technical Specifications:
•Brand Name: National •Capacity-Mild Steel: 12 Gauge •Model Number: N4812 •Type: Sheet Metal Hand Brakes •Weight: 1050 lbs •Working Length: 49

Description:
•Precise bed and beam alignment •Cast iron counterweights •Stop rods for repeat bends •Precision bearings on apron •Heavy duty truss rods and brakes •Streamlined design •Suitable for many types of metal forming operations •All body sections are steel welded •Model S4816 is a Bench Model - Optional Stand is available •3 Year Warranty •F.O.B. SMARTT, TN

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1050.0000 •Shipping Weight - 1050.0000 •Dimensions - Height: 54.0 Length: 78.0 Width: 33.0

24X180 YDS 5MIL 9471 CLR ADH TRANS

Item #: LF5314823
Manufacturer: 3M
Mfg #: 0002120014

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 55.0500

20X6X10 TYPE 07 REC. BOTH SIDES

Item #: MH60200065854
Manufacturer: Norton Abrasives
Mfg #: 6907866585

Technical Specifications:
*Brand Name: Norton Abrasives

Description:


Shipping Info:
*Actual Weight - 95.6310 *Addl Fee Over 70lb - $19.00 per item

Proto® 450HS 50" Top Chest - 12 Drawer, Yellow

Item #: KP4294205
Manufacturer: Proto
Mfg #: J455027-12

Technical Specifications:
•Brand Name: Proto •Model Number: J455027-12YL

Description:
•Cubic inch capacity is 17,641 •Made of 14, 16 and 18 gauge steel •Maximum weight capacity for each drawer is 125 lbs •Standard red powder coat paint finish Also available in black, blue and yellow, made to order Contact customer service for availability •Heavy-duty locks with tubular key •Recessed aluminum extruded drawer pulls •100% full extension drawers •Vinyl top and drawer liners included

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 434.0000 •Dimensions - Height: 39.0 Length: 53.0 Width: 28.0

1100M-1200-2 1050-1200MM DIAL GAGE

Item #: MV7069034
Manufacturer: Starrett
Mfg #: 69034

Technical Specifications:
•Brand Name: Starrett •Model Number: 1100M-1200-2 •Total Range: 1050 - 1200mm

Description:


Shipping Info:
•Actual Weight - .0010

60X250YDS 9737R RED DBL COATED TAPE

Item #: LF5307930
Manufacturer: 3M
Mfg #: 0005111107

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 168.0000

DRO303 12 x 78 Lathe Kit 2 Axis

Item #: HC02T3031278
Manufacturer: Acu-Rite
Mfg #: T303-1278

Technical Specifications:
•Application: Turning •Axis: 2 •Brand Name: Acu-Rite •Description: For Turning Applications •Model Number: T303-1278 •Series: 303 •Travel: 12 x 78 •Type: Digital Readout System

Description:
•DRO203 •7" TFT Color Display •USB Type C Data Interface •Job Clock •Feed Rate Display •Multiple Language Supports •Absolute/Incremental •Graphic Pos aid for Near Zero Warning with Graphics •Help Function •99 Tool Offsets / Diameter •Preset and Zero Reset •4 Function Calculator / Trig Calculator / RPM •Instance inc/mm Conversion •Position-TracTM (Recalls last data after power loss) / RM •Advanced Skew Compensation •Multiple Datums •Multiple Display Views DRO1 & DRO2 •Part Program Storage (Load, Save, Import, Export) •Scale Factor (Allows for part shrinkage / expansion) •Counter Diagnostics •Encoder Input Linear or Rotary •Linear / Non-Linear Compensation up to ±9,999 ppm •Backlash Compensation •Measured Value Out allows data to be output when probing •Remote Switch allows data output and a remote zero •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 57.0000

Proto® 450HS 50" Top Chest - 12 Drawer, Black

Item #: KP4293985
Manufacturer: Proto
Mfg #: J455027-12

Technical Specifications:
•Brand Name: Proto •Model Number: J455027-12BK

Description:
•Cubic inch capacity is 17,641 •Made of 14, 16 and 18 gauge steel •Maximum weight capacity for each drawer is 125 lbs •Standard red powder coat paint finish Also available in black, blue and yellow, made to order Contact customer service for availability •Heavy-duty locks with tubular key •Recessed aluminum extruded drawer pulls •100% full extension drawers •Vinyl top and drawer liners included

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 434.0000 •Dimensions - Height: 39.0 Length: 53.0 Width: 28.0

C55703C40368 BORING BAR

Item #: FF8141692
Manufacturer: Sandvik Coromant
Mfg #: 5729131

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 9.5568