3/4-10 x 9 - Zinc / Yellow Plated Heat Treated Alloy Steel - Cap Screws - Hex

Item #: SN7841090
Manufacturer: Titan
Mfg #: JKR12288

Technical Specifications:
*Box Qty.: 10 *Brand Name: Titan *Coating: Zinc / Yellow Plated *Grade: 8 *Length: 9 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Hex *Size: 3/4-10

Description:
*Grade 8 hex head cap screws are designed for use in areas where there is high stress, and need for extra strength *Used with grade 8 nuts to give you the reliability and assurance that you need *The zinc and yellow plating offers a greater degree resistance than standard zinc, and its bright yellow plating will differentiate itself from our grade 5 hex cap screws

Shipping Info:
*Actual Weight - .0120

HAZ06 RUST INHIBITOR 55GAL DRUM

Item #: LK6076155
Manufacturer: Rustlick
Mfg #: 76155

Technical Specifications:
•Brand Name: Rustlick •Hazard Code: HAZ06 •Size: 55 Gallon

Description:


Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 485.0000

Model 1000; 10 Steps; 32 x 72'' Base Size - Steel Mobile Platform Ladder

Item #: PS601010R3232
Manufacturer: Cotterman
Mfg #: 1010R3232

Technical Specifications:
•Base: 32 x 72 •Brand Name: Cotterman •Model Number: 1000 •Number of Steps: 10 •Overall Height: 130 •Platform Height: 100 •Shipping Weight: 187 lbs •Type: Steel Mobile Platform Ladder •Width at Top: 32

Description:
•One piece, all welded, steel mobile platform laddersmeet or exceed OSHA standards. •1" OD steel tubing •Ladders with 1 thru 4 steps have 2" spring loaded casters •Ladders with 5 thru 11 steps have a "safe-lock" lower step to prevent movement while in use •Gray powder coat finish •Meet OSHA 1910.29 and ANSI A14.7 standards •450 Lb. load capacity •Ship via truck

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 187.0000

S100T15CA-10 1.000 Shank Dia.- T15 Connection-End Mill Shank-Carbide-No Coolant

Item #: IC524508181
Manufacturer: Ingersoll Cutting Tools
Mfg #: 4508181

Technical Specifications:
*Brand Name: Ingersoll Cutting Tools

Description:
*Shank directed parallel to the shaft for optimal chip evacuation *Tips repeat on and off the shank within +/- .0005" in seconds

Shipping Info:
*Actual Weight - 4.7000

M16 x 30 - Black Finish Heat Treated Alloy Steel - Shoulder Screws - Socket Head

Item #: SH8065300
Manufacturer: Holo-Krome
Mfg #: 09047

Technical Specifications:
*Brand Name: Holo-Krome *Coating: Black Finish *Grade: 12.9 *Hex Key: 8 mm *Length: 30 *Material: Heat Treated Alloy Steel *Screw Style: Shoulder Screws - Socket Head *Size: M16 *Thread: M12 - 1.75

Description:
*A hex socket screw with an enlarged, unthreaded shoulder under the socket driven head. *The threaded portion of the shoulder screw is usually one standard size below the shoulder diameter. *Shoulder screws are often referred to as "stripper bolts". *Most used for rotation or sliding applications, such as pulley shafts, in punch work, or for use as a bearing pin. *Shoulder bolts are black in appearance.

Shipping Info:
*Actual Weight - .2350

PF-33 Powerfeeder, 1HP, 3Ph, 460V, 4-Speed, 3 Wheel

Item #: PX501790810K
Manufacturer: Powermatic
Mfg #: 1790810K

Technical Specifications:
•Brand Name: Powermatic •Column Diameter (in.): 2.28 •Model Number: 1790810K •Motor: 1HP, 460V, 3PH •Movement: 9.75 Vert / 18.07 Hor •No. of Rollers: 3 •Swing: 362 Degree •Weight: 134 lbs

Description:
•These rugged, heavy-duty stock feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials •The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions •Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding •5 Year Warranty

Shipping Info:
•Actual Weight - 143.0000 •Addl Fee Over 70lb-$23.00 per item

JPM-13CS JET 15" PLANER/MOLDR MOTOR

Item #: PY63708524
Manufacturer: Jet
Mfg #: 708524

Technical Specifications:
•Brand Name: Jet •Cuts per Minute: 13500 •Cutterhead Diameter (in.): 2-9/16 •Cutterhead Speed (RPM): 4500 •Dust Port Diameter (in.): 4 •Max. Planing Thickness (in.): 6-1/8 •Max. Planing Width (in.): 13 •Min. Planing Length: 14 •Model Number: JPM-13CS •Motor: 1.5HP, 115V/230V Prewired 115V, 1PH •Number of Knives: 3 •Weight: 225 lbs

Description:


Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 225.0000

1-8 x 5 - Zinc / Yellow Plated Heat Treated Alloy Steel - Cap Screws - Hex

Item #: SN7831310
Manufacturer: Rockford
Mfg #: JKR16160

Technical Specifications:
*Box Qty.: 10 *Brand Name: Rockford *Coating: Zinc / Yellow Plated *Grade: 8 *Length: 5 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Hex *Size: 1-8 *Thread: Coarse

Description:
*Grade 8 hex head cap screws are designed for use in areas where there is high stress, and need for extra strength *Used with grade 8 nuts to give you the reliability and assurance that you need *The zinc and yellow plating offers a greater degree resistance than standard zinc, and its bright yellow plating will differentiate itself from our grade 5 hex cap screws

Shipping Info:
*Actual Weight - .0120

175-200MM HOLTEST

Item #: MT80368-177
Manufacturer: Mitutoyo
Mfg #: 368-177

Technical Specifications:
•Brand Name: Mitutoyo •Model Number: 368-177 •Resolution: 0.001mm •Total Range: 175 - 200mm

Description:


Shipping Info:
•Actual Weight - 6.6000

Proto® 78 Piece Starter Set With Tool Box J9969-NA

Item #: KP4281445
Manufacturer: Proto
Mfg #: J99301A

Technical Specifications:
•Brand Name: Proto •Model Number: J99301A •Number of Pieces: 78 •Set Includes: (30) Sockets & Accessories, (17) Wrenches, (10) Striking and Struck Tools, (5) Pliers, (7) Screwdrivers, (9) Miscellaneous Tools

Description:
•1/2" Drive tools •Designed for fastener sizes 5/16" - 1-1/4"

Shipping Info:
•Actual Weight - 46.0000 •Addl Fee Under 70lb -$14.25 per item

K400-70-6-A K-4KN-70MM STROKE

Item #: MA48K400706A
Manufacturer: De-Sta-Co
Mfg #: K400-70-6-

Technical Specifications:
*Brand Name: De-Sta-Co

Description:


Shipping Info:
*Actual Weight - 2.9767

HAZ64 5 GAL SCOTCHWELD ACRYLIC

Item #: KB3587234
Manufacturer: 3M
Mfg #: 0002120087

Technical Specifications:
•Brand Name: 3M •Hazard Code: HAZ64

Description:


Shipping Info:
•HAZ 64 •UPS Ground - Additional Charge of $35.00 per Box •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 50.0000

24 x 24" - Grade A 2-Ledge 6'' Thick - Granite Surface Plate

Item #: NS6080650
Manufacturer: Starrett
Mfg #: 80650

Technical Specifications:
•Brand Name: Starrett •Grade: A - Inspection •Ledge: Two Ledge •Length: 24 •Size: 24 x 24 •Thickness: 6 •Tolerance: .00014 •Type: Granite Surface Plate •Weight: 306 lbs •Width: 24

Description:
•Crystal Pink Granite Surface Plates •Grade A - Inspection Grade: This is typically specified for general work in quality control. •Unilateral Flatness Tolerance Overall flatness tolerance is based on unilateral measurement. •All points on the work surface shall be contained between two parallel planes separated at a distance no greater than the amount specified for each particular grade and size. •Meets or exceeds U.S. Federal Specification GGG-P-463C for flatness •Smooth, jewel-like quartz bearing points protect accuracy and finish of both the surface and the tools used on it.

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 306.0000

WK400-70-6-A WK-4KN-70MM STROKE

Item #: MA48WK400706A
Manufacturer: De-Sta-Co
Mfg #: WK400-70-6

Technical Specifications:
*Brand Name: De-Sta-Co

Description:


Shipping Info:
*Actual Weight - 2.9767

6" x 48" Belt and 12" Disc Floor Standing Combination Sander 1-1/2HP 115/230V; 1PH

Item #: PY63708599
Manufacturer: Jet
Mfg #: 708599K

Technical Specifications:
•Belt Size: 6 x 48 •Brand Name: Jet •Disc Size: 12 •Model Number: JSG-6DCK •Motor: 1.5HP, 115V/230V, 1PH •Weight: 210 lbs

Description:
•Combination Bench Model 6" x 48" 12" Belt/Disc Sander •Standard Equipment: Back stop for horizontal mode Mitre gauge 6" x 48" Sanding belt 12" Sanding disc 4" Dust chute •Sanding belt (WxL) 6" x 48" Disc diameter 12" Belt table tilt 45° Down, 20° Up Disc table tilt 45°, 25° Motor 1-1/2 HP, 1 Ph, 115/230V, Prewired 115 Belt speed 2,500 SFPM Weight 210 lbs. •Belt sander operates horizontally and vertically and can be locked at any angle in between •Simple belt tracking adjustments •Belt guard is designed to allow the full usage of the 6" belt width and length •Two precision ground cast iron tables with mitre gauge slots and 45° & 90° stops

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 210.0000

Drill Grinder - #V390 Sharpens Drills 1/8 to 3/4"; 1/4HP; 4.5AMP; 115V Motor

Item #: PM70V390
Manufacturer: Darex
Mfg #: V390

Technical Specifications:
•Angles: 118° - 140° •Brand Name: Darex •Model Number: V390 •Motor: 1/4HP, 4.5AMP, 115V •Replacement Wheel: PP11125GF •RPM: 3450 •Sharpens Drills: 1/8 to 3/4 •Weight: 25 lbs

Description:
•Perfect choice for shops that need a sharpener for intermittent use •Sharpens most drill bits in less than 60 seconds •Sharpens 1/8" – 3/4" drill bits; HSS, cobalt, TiN-coated, split-point •Choose point angle from 118° – 140° •Grinding wheel never needs dressing; sharpens drills 2,000 times before replacement •No coolant necessary •Attaches to your vacuum system to contain dust and debris •Motor: 15 Volt, 4.5 amp, 1/4 HP, 60 hz, 3450 RPM •Size: 12" x 11" x 9" •Weight: 25 lbs. •3 Year Warranty •F.O.B. ASHLAND, OR

Shipping Info:
•Actual Weight - 25.9000 •Dimensions - Height: 12.2 Length: 17.2 Width: 15.4

#LH220S - Horizontal Lever Stand with Distance Meter for Force Gauges

Item #: NA43LH220S
Manufacturer: Imada
Mfg #: LH220S

Technical Specifications:
•Brand Name: Imada •Class: Testing Equipment •Type: Horizontal Lever Stand with Distance Meter for Force Gauges

Description:
•Both tension and compression testing •Optional distance meter •Stroke 4 •Maximum load 220 lbs. •Lever action allows rapid testing •Large work area accommodates a wide variety of samples

Shipping Info:
•Actual Weight - 39.0000

Buffer - Horsepower: 3/4; Voltage: 115/230; Hertz: 60; Phase: 1; Amps: 4.8/2.4; RPM: 3600; Max Wheel Size: 8 inches;Wheel Width Min/Max: 0.38/1.25

Item #: PP50333B
Manufacturer: Baldor
Mfg #: 333B

Technical Specifications:
•Agency Approvals: UR •Brand Name: Baldor •Features: Factory wired 115V, power cord supplied •Model Number: 333B •Motor: 3/4HP, 115/230V, 1PH •RPM: 3600 •Shaft Diameter: 3/4 •Size: 8 •Type: Industrial Buffer •Weight: 56 lbs

Description:
•Prices include flanges and nuts but do NOT include wheels and/or pedestal. •Buffers are designed for use with soft cloth wheels ONLY. Specific burring applications may require the addition of operator safety devices. Consult with a safety engineer before installation.

Shipping Info:
•Actual Weight - 57.0000 •Dimensions - Height: 13.5 Length: 31.0 Width: 13.5

4-1/2 1.5HP T27 EXTERNAL GRINDER

10" BRIDGE SYSTEM INCLUDE 3 RWP-024

Item #: RW10RWP0243XR
Manufacturer: Raptor Workholding
Mfg #: RWP-024-3X

Technical Specifications:
*Brand Name: Raptor Workholding *Dovetail Height (in.): .125 *Dovetail Width (in.): .75 *Fixture Height (in.): 2.875 *Material: Aluminum *Max. Workpiece Size (in.): 12.5"L x 4"W x 4"H *Model No.: RWP-024-3XR *No. of Clamps: 3 *Type: Dovetail Fixture *Weight: 24 lbs

Description:
*.75" Dovetail bridge system for milling applications *Designed for modular applications: utilizing three RWP-024 fixtures in-line to hold longer parts *The versatility of this fixture allows you to either hold three workpieces weighing 8 pounds and size(L x W x H) 2.0" x 2.0" x 2.0"or 1 long workpiece weighing up to 24 pounds and size(L x W x H) 12.5" x 4.0" x 4.0" *The components of the RWP-024-3XR (each RWP-024 and base unit) are manufactured from Aluminum 7075-T6511 and Anodized Class 2 Type II *Fixture clamps are made from 17-4 Stainless Steel *Unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece

Shipping Info:
*Actual Weight - 7.0000