48 x 96" - Surface Plate Stand 0-Ledge with Leveling Screws

Item #: NT5048960
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
•Brand Name: Generic USA •Length: 96 •Type: Surface Plate Stand 0-Ledge with Leveling Screws •Weight: 300 lbs •Width: 48

Description:
•Stands with Level Screws or Casters and Floor Lock. •Heavy gage reinforced angle iron •Built to hold six times the weight of the surface plates •Overall working height 36 •Each stand is made to order. Non-cancelable, non-returnable.

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 360.0000 •Shipping Weight - 1194.0000 •Dimensions - Height: 36.0 Length: 96.0 Width: 48.0

3/8 X 35' HOSE REEL

Proto® 131 Piece Small Tool Set

Item #: KP4280185
Manufacturer: Proto
Mfg #: J99100

Technical Specifications:
•Brand Name: Proto •Drive: 1/4 •Model Number: J99100 •Number of Pieces: 131

Description:
•44 - Sockets and accessories •28 - Wrenches •6 - Striking and struck tools •14 - Pliers •23 - Screwdrivers •16 - Miscellaneous tools •131 Pieces •1/4" Drive tools •Designed for fastener sizes 5/64" - 3/4" •Tools only

Shipping Info:
•Actual Weight - 25.3900 •Dimensions - Height: 6.90 Length: 24.6 Width: 10.7

Collet Master -- #CM5C; 5C Collet Style

Item #: NJ50CM5C
Manufacturer: Suburban
Mfg #: CM5C

Technical Specifications:
*Base: 3-3/4 x 3-1/2 *Brand Name: Suburban *Capacity: 1-1/8 *Center Height: 3-5/8 *Collet Style: 5C *Overall Height: 5-1/2 *Spindle TIR: .0001 *Type: Collet Master *Weight: 9 lbs

Description:
*Collet Master *Uses all standard 5C Collets *48 position index plate provides a hard stop every 7-1/2° *Drawbar and fitted wooden case included *Two sealed, preloaded ball bearings in spindle *Hardened and ground base is held square and parallel to spindle. *1-1/8" Through hole *Optional face plate and V-block for eccentric forms available *Indexing accuracy ± 45 sec.

Shipping Info:
*Actual Weight - 13.3000 *Dimensions - Height: 10.7 Length: 10.6 Width: 10.4

J-4400A, 12" Industrial Disc Finishing Machine 1-1/2HP, 115/230V, 1PH

Item #: PY60414602
Manufacturer: Jet
Mfg #: 414602

Technical Specifications:
•Brand Name: Jet •Disc Size: 12 •Model Number: 414602 •Motor: 1-1/2HP, 115/230V, 1PH •Overall Dimensions: 16 x 19 x 43 •Spindle Speed: 1960 RPM •Table Size: 12 x 16-3/8 •Table T-Slot Size: 3/8 x 3/4 •Table Tilt: 45 Out, 20 In •Weight: 175 lbs

Description:
•Optimum speed of 1960 RPM, which is ideal for both metal and wood finishing •Fully machined balanced disc runs vibration free •Plain and compound miters are easily obtained by using the standard die cast aluminum miter gauge •Large cast iron slotted table •Easy to read scale shows exact degree of table tilt •Miter gauge •Heavy duty one piece steel stand •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 175.0000

Proto® 1/2" Drive Electronic Torque Tester 25-250 ft-lbs

Item #: KP4220200
Manufacturer: Proto
Mfg #: J6476

Technical Specifications:
•Brand Name: Proto •Head Height: 4-1/2 •Length: 6 •Maximum Output: 3000 •Model Number: J6476 •Width: 6

Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required. •Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions. •Broad accuracy range extends from 10% to 100% of full scale. •Three units of measure are available ft-lb, in-lb, and Nm. •Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches). •Fast sampling rate helps maintain high accuracy during torque applications. •Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter. •Powered by a standard 9V battery, providing up to 50 hours run time. •N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester. •Optional all-steel stand (J6470S) provides a strong support with minimal footprint. •Testers meet or exceed requirements set forth in ASME B107.29

Shipping Info:
•Actual Weight - 6.1600 •Dimensions - Height: 7.50 Length: 8.50 Width: 8.30

HSK100ASYTER20102MSOFTSYNCHRO TAP

Item #: WK525525687
Manufacturer: Widia
Mfg #: 5525687

Technical Specifications:
*Brand Name: Widia

Description:


Shipping Info:
*Actual Weight - 5.5115

3/4 x 8 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4358743
Manufacturer: Starrett
Mfg #: 58743

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 3/4 *Width: 8

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 61.1900

Steel Body Lathe Chuck - 10" D1-6 Mount; 3-Jaw

Item #: HK308231036
Manufacturer: Bison
Mfg #: 7-823-1036

Technical Specifications:
*Brand Name: Bison *Chuck Size: 10 *Class: Lathe Chucks & Accessories *Hole Size: 2.992 *Model Number: 8231036 *Mount: D1-6 *Number of Jaws: 3 *Number of Studs: 6 *Stud Diameter: 7/8 *Type: Steel Body Lathe Chuck *Weight: 85 lbs

Description:
*3-Jaw Direct D-1 Mounting Lathe Chuck *2 Pc. Reversible jaw

Shipping Info:
*Actual Weight - 71.0000 *Dimensions - Height: 12.0 Length: 13.0 Width: 13.0 *Addl Fee Over 70lb - $19.00 per item

EDM-250 Dielectric Oil - 55 Gallon

Item #: LK6072550
Manufacturer: Rustlick
Mfg #: 72550

Technical Specifications:
•Brand Name: Rustlick •Class: Machining Fluids •Hazard Code: HAZ06 •Size: 55 Gallon •Style: EDM-250 •Type: EDM-250 Dielectric Oil

Description:
•Low viscosity for excellent flushing and finishing •Resists Thermal Degradation from High Amperage Application up to 400 Amps •Good for all types of filters

Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 400.0000 •Dimensions - Height: 10.0 Length: 10.0 Width: 10.0

1657 TEGADERM SECUREMENT DRESSING

Item #: KB3557831
Manufacturer: 3M
Mfg #: 5070738757

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:

List 5490 4" x 72 yds PTFE Film Tape - Gray

Item #: LF5395680
Manufacturer: 3M
Mfg #: 0005113895

Technical Specifications:
•Brand Name: 3M •Color: Gray •Series: 5490 •Size: 4" x 72 yds •Style: PTFE Film Tape •Thickness: 3.5 mil

Description:


Shipping Info:
•Actual Weight - 2.6463

Bridgeport Riser Block for Milling Machine - Model #2580050; 4" For Bridgeport

Item #: RL352580050
Manufacturer: Bridgeport
Mfg #: BP 1258005

Technical Specifications:
•Brand Name: Bridgeport •Class: Machine Accessories •Dimension A: 4" (102mm) •For Use With: Bridgeport •Model Number: 12580050 •Type: Bridgeport Replacement Parts

Description:
•Obtain more clearance for very large work-pieces by using riser blocks that extend the height range of the Bridgeport Series I Standard by 4" (102mm) or 7" (178mm) •9 x 42" & 9 x 48" Bridgeport only

Shipping Info:
•Actual Weight - 55.0000

60X250 YDS 3369 SLV ALUM FOIL TAPE

Item #: LF5365784
Manufacturer: 3M
Mfg #: 0005112565

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 142.5990

2.395-2.805" INTERNAL BORE MICROMET

Item #: MV4041849
Manufacturer: Interapid
Mfg #: 78.112389

Technical Specifications:
•Brand Name: Interapid •Model Number: 078112389

Description:


Shipping Info:

S90-1000-10, 10-Ton Hand Chain Hoist with 10' Lift

Item #: RR50101960
Manufacturer: Jet
Mfg #: 101960

Technical Specifications:
•Brand Name: Jet •Capacity: 10 Ton •Headroom: 30 •Lift Height (ft): 10 •Load Chain Diameter: 10 x 30 •Model Number: S90-1000-10 •Rated Load: 10 Ton •Type: Chain Hoist •Weight: 220 lbs

Description:
•JET® S90 Series hand chain hoists were designed with reliability and durability to perform in light-duty industrial applications •Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available) •The JET® S90 is the ideal contractor grade hoist •Lifetime Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 163.0000

Semi-Steel Lathe Chuck -12" Plain Mount; 3-Jaw

Item #: HK308001200
Manufacturer: Bison
Mfg #: 7-800-1200

Technical Specifications:
*Brand Name: Bison *Chuck Size: 12 *Class: Lathe Chucks & Accessories *Description: Forged Steel Plain Back Two-Piece Hard Rev. Jaw *Hole Size: 4.060 *Maximum RPM: 1500 *Model Number: 8001200 *Mount: Plain Back *Number of Jaws: 3 *Type: Semi-Steel Lathe Chuck *Weight: 123 lbs

Description:
*3-Jaw Plain Back Chuck *1 Set of hard master jaws *1 Set of hard top reversible jaws *1 Chuck wrench *1 Set of mounting bolts *2 Hex keys *Eye bolts for chuck sizes 16" diameter and larger *Scroll and jaws hardened and precision ground *Accuracy .003

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 110.0000 *Dimensions - Height: 9.00 Length: 15.0 Width: 15.0

3/4 x 5-1/2 - Black Finish Heat Treated Alloy Steel - Shoulder Screws - Socket Head

Item #: SK521288
Manufacturer: Brighton Best
Mfg #: 221259

Technical Specifications:
*Box Qty.: 10 *Brand Name: Brighton Best *Coating: Black Finish *Hex Key: 3/8 *Length: 5-1/2 *Material: Heat Treated Alloy Steel *Screw Style: Shoulder Screws - Socket Head *Size: 3/4 *Thread: 5/8-11

Description:
*Shoulder Screws/Bolts *Precision ground *Heat treated alloy steel *NC thread series *Class 3A thread *Used for rotation or sliding applications such as pulley shafts, in punch work, or for use as a bearing pin *Shoulder screws are also referred to as "stripper bolts" *The shoulder screw has an enlarged unthreaded, cylindrical shoulder under the head, the diameter of which serves as basis for the begining of the nominal size *World Class Quality

Shipping Info:
*Actual Weight - .8520

C8 x PG 10 x 332mm XL Capto Capto powRgrip Collet Holder

Item #: GM21888871160
Manufacturer: Rego-Fix
Mfg #: 8888.7116

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style/Fits: PG10 *Gage Length: 332mm *Mount: C8 *Nose Diameter: 16mm *Style: Capto powRgrip Collet Holder *Type: Extra Long

Description:
*T.I.R. <3 µ¼m *Highest clamping force and transferable force *Surface finish max. Ra 0.25 *Q+ balanced to G 2.5 @ 25000 min-1 *Ideal for high speed cutting and high performance cutting *Ready to accept Hi-Q balancing rings which allow to offset the imbalance introduced by the cutting tool up to 80000 min-1

Shipping Info:
*Actual Weight - .2500

1658 TEGADERM SECUREMENT DRESSING

Item #: KB3557832
Manufacturer: 3M
Mfg #: 5070738757

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info: