5C Collet Adapter - Part # JK-697

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of 5C & R8 Collets with charts with critical dimensions.

S26 Collet Pad - Part # CP-S26BLANK-S - MACHINABLE SOFT EMERGENCY

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of S Type Collet Pads with product charts with critical dimensions.

Collet Pad for Warner & Swasey Machine #5, 1A - Soft Emergency Blank - Part # CP-WS5BLANK

Used On Warner & Swasey Master Collets 471-1001. Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of Warner Swasey Collet Pads with product charts with critical dimensions.

Electromagnetic Chuck with Transverse Poles - #EMCB612T; 6'' x 12''

Item #: NJ50EMCB612T
Manufacturer: Suburban
Mfg #: EMCB612T

Technical Specifications:
*Brand Name: Suburban *Height: 3-1/2 *Pole: Transverse *Size: 6 x 12 *Watts: 72 *Weight: 75 lbs

Description:
*Electromagnetic Chucks *Transverse Pole Chucks - Poles Run Side to Side *Longitudinal Pole Chucks - Poles Run End to End *Top plate has 1/8" steel poles and 1/16" stainless steel separators *Chucks are sealed against dirt and liquids *Longitudinal (lengthwise) or transverse (crosswise) pole models available *Two clamps, back rail and side rail included *Chuck controls must be used with all electromagnetic chucks!

Shipping Info:
*Actual Weight - 75.0000 *Dimensions - Height: 9.00 Length: 17.0 Width: 11.0 *Addl Fee Over 70lb - $19.00 per item

Guardian tempering valve blends hot and cold water to deliver tepid water. Valve has flow capacity of 2 to 6 gallons per minute (GPM). Valve can be used with an eyewash, eye/face wash, dual purpose eyewash/drench hose or drench hose unit.

Item #: KB56G3600LF
Manufacturer: Guardian
Mfg #: G3600LF

Technical Specifications:
•Brand Name: Guardian •Size: 10 x 9 x 9" •Tank Capacity: 6 Gallon

Description:
•Temperature Control: Valve has bimetallic thermostat that senses incoming water temperature and automatically blends water to 85°F (29°C). High temperature limit stop is set to 90°F (32°C). Valve has dial thermometer on outlet to monitor temperature of delivered water. Note: Valve may need to be adjusted when installed based on incoming water temperature. Refer to "Installation Instructions" for further information. •Fail Safe: In event of restriction or failure of hot water supply, internal bypass allows valve to deliver cold water to emergency unit. In bypass mode, valve will deliver 20 GPM of cold water at 30 PSI flow pressure. In event of loss of cold water supply, valve will close to prevent scalding and not deliver water. •Supply Requirements: Minimum recommended hot water supply temperature is 120°F (49°C). Note: Extremely cold climates may require a hot water supply temperature greater than 120°F (49°C). 30 PSI minimum supply pressure is required for proper valve operation. Maximum supply pressure is 125 PSI. Maximum hot to cold water pressure differential is 5%. •Mounting: Furnished with heavy duty mounting bracket for securing valve to panel or wall. •Inlets/Outlet: 1" NPT female hot and cold water inlets with 1-1/4" NPT female outlet. Inlets can be rotated 360 degrees for top or bottom supply. Each inlet has integral water strainer, check valve and supply stop. •Quality Assurance: Valve is completely assembled and water tested prior to shipment. Valve is certified to ASSE 1071. Valve is certified to meet low lead requirements of wetted surface area less than 0.25% lead by weight.

Shipping Info:
•Actual Weight - 6.0000

Table Power Feed - 140 inch/lbs; For All Purpose

Item #: JD80M2500140
Manufacturer: Servo
Mfg #: M-2500-140

Technical Specifications:
•Brand Name: Servo •Description: X, Y & Z Axis Powerfeed •For Use With: General Purpose •Model Number: M-2500-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 12.6000 •Dimensions - Height: 14.5 Length: 12.3 Width: 7.40

#ELM300 - 300KG/660 lbs Lifting Magnet

Item #: TE12ELM300
Manufacturer: Techniks
Mfg #: ELM-300

Technical Specifications:
*Brand Name: Techniks *Height: 6.1 *Height to Hook: 3.7 *Holding Capacity (lbs): 660 *Length: 7.1 *Lift Capacity Round (lbs)(kg): 300 lbs *Lift Capacity Sheet (lbs)(kg): 660 lbs *Model Number: ELM-300 *Rated Lift: 3.5 times maximum *Type: Permanent Rare-Earth Magnet *Weight: 18.9 lbs *Width: 3.6

Description:
*Use the EZ-LIFT magnetic lifters to move plate steel, block or round steel, and iron material in your shop * Super-powerful "rare earth" neodymium iron boron magnet requires no electricity to perform material lifting *Perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc.

Shipping Info:
*Actual Weight - 19.4000 *Dimensions - Height: 5.20 Length: 8.00 Width: 6.40

For Use On: Diamond & CBN Wheels - Brake Truing Device

Item #: NP55DT100
Manufacturer: Surf-Pro
Mfg #:

Technical Specifications:
*Brand Name: Surf-Pro *Description: Truing Device with 1 ea. 3 x 1 x 1/2 Wheel *For Use With: Diamond & CBN Wheels *Specification: Model DT100 Turing Device *Type: Brake Truing Device

Description:
*For Diamond and CBN Wheels *Designed for truing diamond and CBN wheels rapidly and with minimum loss of diamond *Ideal for straight wheels with diamond in the periphery, cut-off wheels, internal grinding wheels and cup wheels with diamond in the rim *Easy to operate *Rotate the truing wheel and make contact with diamond/CBN wheel *Oscillate the unit and truing wheel across face of wheel being trued using machine cross-slide.

Shipping Info:
*Actual Weight - 9.6000 *Dimensions - Height: 5.30 Length: 8.40 Width: 6.40

On/Off Rare Earth Permanent Magnetic Square 450 lbs Holding Force

Item #: NE70WS0450R
Manufacturer: Mag-Mate
Mfg #: WS0450R

Technical Specifications:
*Brand Name: Mag-Mate *Diameter: 2 *Height: 2-3/4 *Holding Capacity (lbs): 450 *Length: 3 *Style: Squares *Switch Style: On/Off *Type: Rare Earth *Width: 2-1/2

Description:
*On/Off Permanent Rare Earth Magnetic Squares are extremely powerful and eliminate the need for tedious clamping *Mag90» squares offer fast workholding on multiple sides for flat or round steel *Features pre-tapped holes on all sides for mounting and a locking On/Off handle for safety

Shipping Info:
*Actual Weight - 4.3000

CIMSTAR® 40B Pink Coolant - 5 Gallon

Item #: LL5100893P
Manufacturer: Cimcool
Mfg #: 00893-P

Technical Specifications:
•Brand Name: Cimcool •Hazard Code: HAZ58 •Size: 5 Gallon

Description:
•Semi-synthetic recommended for moderate-duty machining and grinding of ferrous metals and some non-ferrous metals. •The oily residue keeps machine tools and work-piece materials free of corrosion and staining •Good rancidity and foam control •Additional handling charges may apply

Shipping Info:
•HAZ 58 •UPS Ground - No Additional Shipping Charges •UPS Air-No Additional Shipping Charges •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 46.3000 •Dimensions - Height: 15.7 Length: 12.5 Width: 12.5 •Addl Fee Under 70lb - $14.25 per item

18 x 24" - Grade B 0-Ledge 3'' Thick - Granite Surface Plate

Item #: NS50C18240
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Accuracy: ±.00015 •Brand Name: Procheck •Grade: B •Ledge: 0 •Length: 24 •Thickness: 3 •Type: Granite Surface Plate •Weight: 147 lbs •Width: 18

Description:
•Precision Toolroom Black Granite Surface Plates •Granite Surface Plates meet or exceed Federal Specification GGG-P-463c •Does not rust or corrode •Does not nick or burr •Harder than steel •Retains accuracy for years •Guaranteed repeat reading •Auto-collimator checked for overall accuracy •Certificate of accuracy not included

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 132.0000 •Dimensions - Height: 3.75 Length: 25.0 Width: 19.5

5/8x3-3/4" Dovetail Bolt

Item #: SG6617904
Manufacturer: Jergens
Mfg #: 17904

Technical Specifications:
*Bolt Length: 3-3/4 *Bottom Dovetail Width: 1-1/16 *Brand Name: Jergens *Dovetail Height: 3/8 *Dovetail Length: 1-1/8 *Material: 4140 Steel *Thread Class: 2A *Thread Length: 1-1/2 *Thread Size: 5/8-11 *Top Dovetail Width: 3/4

Description:
*Material: 4140 Forging (140,000 PSI) Tensile *Finish: Black Oxide *Heat Treat: Rc 32-36 *Thread: 2A-UNC *Available in FeatureProTM Design Software

Shipping Info:
*Actual Weight - .4000 *Dimensions - Height: 1.06 Length: 4.30 Width: 1.12

Holders for Thread Wires-Set of 5

Item #: GG4516707
Manufacturer: Flexbar
Mfg #: 16707

Technical Specifications:
•Brand Name: Flexbar •For Threads: Attachments only for Thread Wires -Set of 5 •Type: Attachments only for Thread Wires -Set of 5

Description:
•Set of 5 color-coded holders •Includes: .018 -.022 (Purple) .024 -.032 (Blue) .040 -.045 (Yellow) .055 -.063 (Green) .072 -.081 (Red) •Makes thread triangles, thread MIC s and all other current methods obsolete •Fits all micrometers with .245 to .312 anvils •No more lost thread wire in the chip pans •Each part fits 2 sizes of wires

Shipping Info:
•Actual Weight - .0100 •Dimensions - Height: .210 Length: 4.75 Width: 3.00

8200HB1-C SANDING/FIBERGLASS

Item #: KB3590483
Manufacturer: 3M
Mfg #: 0005114190

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - .7125

5C Aluminum Oversize Collet - Part # JK-735

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of 5C & R8 Collets with charts with critical dimensions.

Threaded Drawnuts for Strong N200, Samchully HS08 and Kitagawa B200 Series Chucks - Part # K-D2086020N-B

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of Threaded Drawnuts and other products with charts with critical dimensions.

Clamp Screws for "S" Style Collet Pads - Part # S30-SCREW

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of Collet Pads with product charts with critical dimensions.?ÕÌ_

Collet Pad for Warner & Swasey Machine #5, 1A - 1/4" Round Smooth - Part # CP-WS5RM02500

Used On Warner & Swasey Master Collets 471-1001. Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Click here to see our full line of Warner Swasey Collet Pads with product charts with critical dimensions.

Auto Strong SK Series 3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted) - Part # SK-6

SK

3-jaw strong scroll chuck plain back, 2-piece jaws (front and back mounted)

• SK types chucks have wider unilization range; hard jaws suitable for heavy cutting; soft jaws suitable for light and precision cutting.
• Hard jaws could be used as internal jaws and external jaws.
• Gripping accuracy of 0.03mm (0.0012 inch) T.I.R.
• The body is made of MEEHANITE. It is suitably used for high speed revolution and 3 times more durable than regular material.

Please contact us for current price and availability. We carry the entire Auto Strong product line and guarantee the lowest price on all products.

9400 Floor Model Drilling & Tapping Machine - 18-1/2'' Swing; 2HP; 1PH; 110V Motor

Item #: PV559400
Manufacturer: Ellis
Mfg #: 9400

Technical Specifications:
•Brand Name: Ellis •Column Diameter: 4 •Drilling Capacity: 1-1/4 Cast Iron, 1-1/16 Steel •Model Number: 9400 •Motor: 2HP, 110V, 1PH •Quill Diameter: 3 •Range of Speeds: 0 - 1200 RPM •Spindle to Table (max.): 27-1/4 •Spindle Taper: 3MT •Spindle Travel: 5-3/8 •Swing: 18-1/2 •Table Size: 15-7/8 x 17-7/8 •Tapping Capacity: 3/4 •Type: Floor Model Drilling & Tapping Machine •Weight: 675 lbs

Description:
•2 HP motor with A.C. inverter •Electronic Infinitely Variable Speed •Machine can tap 3/4" holes (N.C.) •High torque at all speeds even in forward or reverse •Continuous speed while in operation •Instantaneous reversing for tapping •Can tap right or left hand threads •Variable speed from 0-1200 RPM •Ball bearing chuck, drill bit and machine vise shown on machines are optional •Three Machines in One – Tapping Machine, Drilling Machine, Reaming Machine •Machines comes standard with power downfeed on spindle •1 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 675.0000 •Dimensions - Height: 41.0 Length: 80.0 Width: 28.0 •An additional $75.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.