M2.50 X .35 6G GO/NO-GO SET PLUG

Item #: EY52372106030
Manufacturer: Vermont Gage
Mfg #: 372106030

Technical Specifications:
•Brand Name: Vermont Gage

Description:


Shipping Info:

C3-391.27-20 060 CAPTO ADAPTOR

Item #: WC145017214
Manufacturer: Walter
Mfg #: 5017214

Technical Specifications:
*Brand Name: Walter

Description:


Shipping Info:

C3-391.20-12 055 CAPTO ADAPTOR

Item #: WC145017243
Manufacturer: Walter
Mfg #: 5017243

Technical Specifications:
*Brand Name: Walter

Description:


Shipping Info:

1/8 x 12 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8054907
Manufacturer: Starrett
Mfg #: 54907

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1/8 *Width: 12

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 10.2000

Young Bros Letter Stamps A - Z -- 1/2'' Type Size-Heavy Duty-27 Pieces per Set

Item #: KF5009273
Manufacturer: Young Bros.
Mfg #: 09273

Technical Specifications:
•Brand Name: Young Bros. •Overall Length: 3-3/4 •Pieces per Set: 27 •Size of Square: 3/4 •Style: Heavy Duty •Type Size: 1/2 •Weight (lbs): 18-1/2

Description:
•Each stamp has three deep grooves across thumb side of stamp giving quick identification as well as an index mark to place stamp right side up. Also have character identification and size marked on side.

Shipping Info:
•Actual Weight - 17.4500 •Dimensions - Height: 4.50 Length: 14.0 Width: 3.50

Basic Clamping Set - #20903; 5/8-11 Stud Size

Item #: SG5020903
Manufacturer: Te-Co
Mfg #: 20903

Technical Specifications:
*Brand Name: Te-Co *Plain Clamp Number: 30407, 30408, 30409 *Serrated End Clamp Number: 30507, 30508, 30509 *Step Clamp Number: 30803 *Stud Size: 5/8-11 *Type: Basic Clamping Set

Description:
*Kit Contains: 14 Clamps, 1 Holder

Shipping Info:
*Actual Weight - 14.6500 *Dimensions - Height: 5.00 Length: 11.0 Width: 9.70

C3-391.27-16 056 CAPTO ADAPTOR

Item #: WC145017213
Manufacturer: Walter
Mfg #: 5017213

Technical Specifications:
*Brand Name: Walter

Description:


Shipping Info:

BT50 x ER25 x 100mm H Form B Collet Chuck

Item #: GM20415012553
Manufacturer: Rego-Fix
Mfg #: 4150.12553

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style: ER25 *Description: BT50 / ER25 x 100mm H Form B *Head Length/Projection: 3.93 *Mount: BT50 *Nose Diameter: 1.57 *Type: Form B *Wrench Number: 7111.32000

Description:
*Case hardened to 58-62 HRc *Pre-balanced to G2.5 @ 22,000 RPM's *T.I.R. from the collet cavity to the holder taper 0.0001" or better *Lot Numbers for lot traceability *Through the spindle coolant or through the flange version available *BT & CAT+ have Hi-Q clamping nut included *AT3 or beter tapers guaranteed *Superior surface finish at 0.25Ra for better fit and accuracy *Swiss made to ISO 90001 *Big Plus System - Licensed by Big Daishowa

Shipping Info:
*Actual Weight - .2500

BOOSTER POWER PAC KIT IV

Item #: SG6862206
Manufacturer: Jergens
Mfg #: 62206

Technical Specifications:
*Brand Name: Jergens

Description:
*Booster Installation Kit Includes: *Filter/Regulator 61617 *4-Way Hand Valve 61615 *Muffler 62613 *Air Hose (18 Ft.) 61108 *Pilot Check Valve 61629 *Hydraulic Hose (6 Ft.) 61205 *Quick Disconnects Couplings 61915, 61965 *Fittings as Req'D

Shipping Info:
*Actual Weight - 9.7600

BT+30 x ER20 x 70mm H Collet Chuck

Item #: GM20413012036
Manufacturer: Rego-Fix
Mfg #: 4130.12036

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style: ER20 *Description: BT+30 / ER20 x .070mm H *Head Length/Projection: 3.93 *Mount: BT+30 *Nose Diameter: 1.34 *Type: Standard *Wrench Number: 7112.16010

Description:
*Case hardened to 58-62 HRc *Pre-balanced to G2.5 @ 22,000 RPM's *T.I.R. from the collet cavity to the holder taper 0.0001" or better *Lot Numbers for lot traceability *Through the spindle coolant or through the flange version available *BT & CAT+ have Hi-Q clamping nut included *AT3 or beter tapers guaranteed *Superior surface finish at 0.25Ra for better fit and accuracy *Swiss made to ISO 90001 *Big Plus System - Licensed by Big Daishowa

Shipping Info:
*Actual Weight - .2500

#5650OLP - .640 OD x 3/8 ID x 50 Feet Hose - Hose Reel

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT-350-27-55 - Collet Chuck

Item #: TE106150150
Manufacturer: Techniks
Mfg #: 6150150

Technical Specifications:
*Brand Name: Techniks *Capacity: 15mm *Chuck Size: BT50 *Collets Included: No *Model Number: 6150150 *Mount: BT50 *Spindle Interface: BT50 *Weight: lbs

Description:
*Techniks Boring Tools exceed industry standards for taper accuracy and concentricity *Two offset axial tapered locking screws maximize rigidity and allow fast tool changes *Reducers allow different size boring heads to be used with the same tool holder *Use extensions to increase boring depth *

Shipping Info:
*Actual Weight - 1.0000

BT50 x ER16 x 160mm H Collet Chuck

Item #: GM20415011680
Manufacturer: Rego-Fix
Mfg #: 4150.1168

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style: ER16 *Description: BT50 / ER16 x 100mm H *Head Length/Projection: 6.30 *Mount: BT50 *Nose Diameter: 1.11 *Type: Standard *Wrench Number: 7111.32000

Description:
*Case hardened to 58-62 HRc *Pre-balanced to G2.5 @ 22,000 RPM's *T.I.R. from the collet cavity to the holder taper 0.0001" or better *Lot Numbers for lot traceability *Through the spindle coolant or through the flange version available *BT & CAT+ have Hi-Q clamping nut included *AT3 or beter tapers guaranteed *Superior surface finish at 0.25Ra for better fit and accuracy *Swiss made to ISO 90001 *Big Plus System - Licensed by Big Daishowa

Shipping Info:
*Actual Weight - .2500

BT+30 x ER16 x 80mm H Collet Chuck

Item #: GM20413011646
Manufacturer: Rego-Fix
Mfg #: 4130.11646

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style: ER16 *Description: BT+30 / ER16 x .080mm H *Head Length/Projection: 1.97 *Mount: BT+30 *Nose Diameter: 1.11 *Type: Standard *Wrench Number: 7112.16010

Description:
*Case hardened to 58-62 HRc *Pre-balanced to G2.5 @ 22,000 RPM's *T.I.R. from the collet cavity to the holder taper 0.0001" or better *Lot Numbers for lot traceability *Through the spindle coolant or through the flange version available *BT & CAT+ have Hi-Q clamping nut included *AT3 or beter tapers guaranteed *Superior surface finish at 0.25Ra for better fit and accuracy *Swiss made to ISO 90001 *Big Plus System - Licensed by Big Daishowa

Shipping Info:
*Actual Weight - .2500

BT-350-22-100 - Collet Chuck

Item #: TE106150125
Manufacturer: Techniks
Mfg #: 6150125

Technical Specifications:
*Brand Name: Techniks *Capacity: 12mm *Chuck Size: BT50 *Collets Included: No *Model Number: 6150125 *Mount: BT50 *Spindle Interface: BT50 *Weight: lbs

Description:
*Techniks Boring Tools exceed industry standards for taper accuracy and concentricity *Two offset axial tapered locking screws maximize rigidity and allow fast tool changes *Reducers allow different size boring heads to be used with the same tool holder *Use extensions to increase boring depth *

Shipping Info:
*Actual Weight - 1.0000

51" Caliper Extender Attachment

Item #: NB75Z2551
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Model Number: Z2551 •Size: 51" •Type: Caliper Extender Attachment

Description:
•An economical attachment to extend the range of your 6" caliper

Shipping Info:
•Actual Weight - 3.0960

20 x 4 x 10" - Aluminum Oxide (83A) / 46G - Centerless & Cylindrical Wheel

Item #: MG9224002
Manufacturer: CGW
Mfg #: 34061

Technical Specifications:
*Brand Name: CGW *Diameter: 20 *Grit Size: 46G *Hardness: G *Hole Size: 10 *Material: Aluminum Oxide (83A) *Size: 20 x 4 x 10 REC1/S 12-1/2 x 7/8 O/S 12-1/2 x 1-1/4 *Spec: 86A46-GV *Thickness: 4 *Type: Centerless and Cylindrical Wheel *Wheel Type: 83A

Description:
*Abrasive Type 83A - Friable, full premium aluminum oxide *Abrasive Type 91A - Semi-Friable, mixed aluminum oxide *Vitrified Bond - 83A 46G+ - Friable aluminum oxide with induced porosity

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 61.0000

5/8-18X3-1/2 HEX CAP GR 5 ZINC (25)

Item #: SN7520795
Manufacturer: Titan
Mfg #: JTR10112

Technical Specifications:
*Brand Name: Titan

Description:


Shipping Info:
*Actual Weight - .0130

0 - 24" / 0 - 600mm Measuring Range (.0005" / .01mm Res.) - Electronic Caliper

Item #: NA5554100024
Manufacturer: Fowler
Mfg #: 54-100-024

Technical Specifications:
•Brand Name: Fowler •Hazard Code: HAZ05 •Jaw Depth: 4 •Measuring Range: 0 - 24 / 0 - 600mm •Model Number: 54-100-024-1 •Resolution: .0005" / 0.01mm •Type: Electronic Caliper

Description:
•RS232C Direct output •Hold feature •Preset mode now includes offset for inside jaws •All sizes feature fine adjustment screw •Inch/metric conversion •Includes wooden case

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 4.7000 •Dimensions - Height: 1.80 Length: 31.2 Width: 6.60 •Additional handling -$15.00 per item

798B-6/150 6/150MM ELEC CALPR W/SLC

Item #: MV7012522
Manufacturer: Starrett
Mfg #: 12522

Technical Specifications:
•Brand Name: Starrett •Measuring Range: 0 - 6 / 0 - 150mm •Model Number: 798B-6/150 W/SLC •Resolution: .0005" / 0.01mm •Type: Electronic Caliper

Description:


Shipping Info:
•Actual Weight - .8000