HSK63 1 1/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63126309
Manufacturer: Parlec
Mfg #: H63A-12SF6

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-12SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Adaptor Plate; Setrite/Easy Chuck- For 12" Chucks; D6

Item #: HF501205023
Manufacturer: PBA
Mfg #: 1205023

Technical Specifications:
*Adapter Type: D-1 *Brand Name: PBA *Chuck Size: 12 *For Chuck Size: 12 *For Chuck Types: Setrite & Easy-Set *Mount: D-6 *Mounting Plate Type: Type D Camlock *Type: Adaptor Plate for Setrite & Easy-Set Chucks

Description:
*Steel Adapter Plates for Adjustable Chucks *Fully Finished Precision Steel Adapters, No Machining Required *Generic USA machined to fit Bison or Rapidhold *Rapidhold & Bison adapters are interchangeable *BTC adapters for BTC, Buck and PBA Chucks *BPA adapters for PBA Setrite and Atlas easy set chucks

Shipping Info:
*Actual Weight - 17.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT-340-42-200 - Collet Chuck

Item #: TE106140375
Manufacturer: Techniks
Mfg #: 6140375

Technical Specifications:
*Brand Name: Techniks *Capacity: 24mm *Chuck Size: BT40 *Collets Included: No *Model Number: 6140375 *Mount: BT40 *Spindle Interface: BT40 *Weight: 5.7 lbs

Description:
*Techniks Boring Tools exceed industry standards for taper accuracy and concentricity *Two offset axial tapered locking screws maximize rigidity and allow fast tool changes *Reducers allow different size boring heads to be used with the same tool holder *Use extensions to increase boring depth *

Shipping Info:
*Actual Weight - 5.7000 *Dimensions - Height: 11.0 Length: 3.00 Width: 3.00

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 5/8 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63626309
Manufacturer: Parlec
Mfg #: H63A-62SF6

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-62SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 12mm x 160mm - Shrink Fit Tool Holder

Item #: GM94H63M121609
Manufacturer: Parlec
Mfg #: H63A-M12SF

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: H63A-M12SF160-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100 1 1/4 x 4.72 - Shrink Fit Tool Holder

Item #: GM94H100124729
Manufacturer: Parlec
Mfg #: H100A-12SF

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 4.720 *Model Number: H100A-12SF472-9 *Shank: HSK100A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 7.2000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSKA63 x 3/16 Short Shrink Chuck

Item #: HA71A63140316Z
Manufacturer: Haimer USA LLC
Mfg #: A63.140.3/

Technical Specifications:
*Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: A63.140.3/16Z *Mount: HSK-A63 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force

Shipping Info:

$464.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 16mm x 160mm - Shrink Fit Tool Holder

Item #: GM94H63M161609
Manufacturer: Parlec
Mfg #: H63A-M16SF

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: H63A-M16SF160-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 3-1/2 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657212
Manufacturer: Starrett
Mfg #: 57212

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 5/8 *Width: 3-1/2

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 11.1500

$471.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 7/8 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4459036
Manufacturer: Starrett
Mfg #: 59036

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 3/8 *Width: 7/8

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 3.3500

$471.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 5/16 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63316309
Manufacturer: Parlec
Mfg #: H63A-31SF6

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-31SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSKE50 x ER11 x 2.36 Collet Chuck

Item #: HA70E5002511
Manufacturer: Haimer USA LLC
Mfg #: E50.025.11

Technical Specifications:
*Brand Name: Haimer USA LLC *Collet Style: ER11 *Gage Length: 2.36 *Model Number: E50.025.11 *Mount: HSK-E50 *Nose Diameter: 0.75 *Size/Range: 0.02 - 0.28 *Type: Collet Chuck *Weight: 1.1 lbs

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 1.1000

$464.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

EN2606NX11 6" X 11'

Item #: SE82EN2606NX11
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
•Actual Weight - 13.5000 •Dimensions - Height: 6.00 Length: 17.0 Width: 7.00

$429.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 3/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94H63756309
Manufacturer: Parlec
Mfg #: H63A-75SF6

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: H63A-75SF630-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bullard Jaw - #HR-BUL-RJ

Item #: HF70HRBULRJ
Manufacturer: H & R
Mfg #: HR-BUL-RJ

Technical Specifications:
*Bolt size: 7/8 *Brand Name: H & R *Class: Lathe Chucks & Accessories *Dimension E: 5/8 *Dimension F: 3.250 *Dimension J: 3 *Dimension K: 2 *Jaw Length: 6-5/8 *Jaw Width: 3 *Overall Height: 4.00 *Type: Bullard Jaw

Description:
*Bullard Tooling *SOLD INDIVIDUALLY

Shipping Info:
*Actual Weight - 14.0000

$423.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 6 - Oil Hardening Flat Stock

Item #: LY5103214
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 30.9700 *Dimensions - Height: .500 Length: 36.0 Width: 6.00

$451.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAPTO C6 X TG 100-80MM

Item #: TE1214369110008
Manufacturer: Techniks
Mfg #: 143.691.10

Technical Specifications:
*Brand Name: Techniks

Description:

Shipping Info:
*Actual Weight - 1.0000

$468.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1X600 YDS 450EK ADH TRANSFER TAPE

Item #: LF5338587
Manufacturer: 3M
Mfg #: 0002120038

Technical Specifications:
•Brand Name: 3M

Description:

Shipping Info:
•Actual Weight - 4.5455

$349.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK63 20mm x 160mm - Shrink Fit Tool Holder

Item #: GM94H63M201609
Manufacturer: Parlec
Mfg #: H63A-M20SF

Technical Specifications:
*Bore Diameter: 20mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: H63A-M20SF160-9 *Shank: HSK63A *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 6.0000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HAZ05 20V RECIP SAW

Item #: PD20DCS367P1
Manufacturer: DeWALT
Mfg #: DCS367P1

Technical Specifications:

Description:

Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 9.3000 •Dimensions - Height: 9.68 Length: 16.7 Width: 4.68 •Additional handling -$15.00 per item

$423.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It