12 x 2 x 5" - Medium Grit - 9SM - Silicon Carbide - Bear-Tex Convolute Non-Woven Wheel

Item #: MH62W1255374
Manufacturer: Norton Abrasives
Mfg #: 6626105537

Technical Specifications:
*Arbor Hole: 5 *Brand Name: Norton Abrasives *Density: 9SM *Diameter: 12 *Face Width: 2 *Grit: Medium *Material: Silicon Carbide *Maximum RPM: 3,000 *Size: 12 x 2 x 5 *Standard Pack: 71 *Trade Name: Bear-Tex *Type: Convolute Non-Woven Wheel

Description:
*Medium grit provides a good blend of cut rate and finish *Silicon carbide is a sharper more aggressive abrasive and leaves a fine/brighter scratch pattern *Best choice for fine finishing with light pressure *Lubricants such as water-soluble oil and straight oil will decrease the heat and improve the surface finish and luster *Dense web construction (9 density) for starting point for deburring blending polishing and finishing applications *Convolute wheels are wound around a core and must always be run in the direction of the arrow printed on the side of the wheel *Durable aluminum reducing bushings are available to accommodate most arbor sizes

Shipping Info:
*Actual Weight - 6.6500

5/8 x 1-1/4 x 36 - High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4269333
Manufacturer: Starrett
Mfg #: 69333

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 5/8 *Width: 1-1/4

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.9700

5T Hydraulic Hyd Sngl Acting Cylinder 7'' Stroke

Item #: KP306C05T07
Manufacturer: Williams
Mfg #: 9922632

Technical Specifications:
•Brand Name: Williams •Closed Height: 10.71 •Cylinder Bore Diameter: 1.13 •Cylinder Capacity (Tons): 5 •Cylinder Effective Area: 1.00 •Maximum Height: 17.8 •Outside Diameter: 1.5 •Plunger Diameter: 1.00 •Pressure Rating (PSI): 10,000 •Saddle Diameter: 0.98 •Stroke (in): 7.09

Description:
•Snap in grooved saddles •Rod wiper seals out dirt and contamination •Collar fixture thread, collar thread protector •Two base mounting holes on most models •High strength steel construction from gun drilled solid bar, solid steel cylinder body •High flow 3/8" NPTF couplers, Internal plunger threads •One piece high grade alloy bearing for side load protectionIndustrial hard chrome plated ram helps prevent rust and corrosion •Heavy duty return spring provides quicker retraction •Maximum working pressure: 10,000 psi / 700 bar

Shipping Info:
•Actual Weight - 4.8000

C53912025080 CAPTO ADAPTER

Item #: FF8106314
Manufacturer: Sandvik Coromant
Mfg #: 5729916

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 3.6960

12 x 2 x 5" - Fine Grit - 9SF - Silicon Carbide - Bear-Tex Convolute Non-Woven Wheel

Item #: MH62W1255279
Manufacturer: Norton Abrasives
Mfg #: 6626105527

Technical Specifications:
*Arbor Hole: 5 *Brand Name: Norton Abrasives *Density: 9SF *Diameter: 12 *Face Width: 2 *Grit: Fine *Material: Silicon Carbide *Maximum RPM: 3,000 *Size: 12 x 2 x 5 *Standard Pack: 71 *Trade Name: Bear-Tex *Type: Convolute Non-Woven Wheel

Description:
*Fine grit provides a reduced cut rate and is recommended for better finishes and form holding *Silicon carbide is a sharper more aggressive abrasive and leaves a fine/brighter scratch pattern *Best choice for heavy deburring applications *Lubricants such as water-soluble oil and straight oil will decrease the heat and improve the surface finish and luster *Dense web construction (9 density) for starting point for deburring blending polishing and finishing applications *Convolute wheels are wound around a core and must always be run in the direction of the arrow printed on the side of the wheel *Durable aluminum reducing bushings are available to accommodate most arbor sizes

Shipping Info:
*Actual Weight - 6.0000 *Dimensions - Height: 3.00 Length: 13.0 Width: 13.0

5/8 x 1-1/4 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369561
Manufacturer: Starrett
Mfg #: 69561

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 5/8 *Width: 1-1/4

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.9700

36 x 7/16 x 4 - Oil Hardening Flat Stock

Item #: LY4054435
Manufacturer: Starrett
Mfg #: 54435

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 7/16 *Width: 4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 18.0500

PN6865 SCOTCH APRON TAPER

Item #: LF5306865
Manufacturer: 3M
Mfg #: 0002120006

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 12.4400

#1150 - 1/2" Drive Air Powered Impact Wrench

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#CP9541 - 1/2'' Drive - Angle Type - Air Powered Impact Wrench

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK E 63 SRK 3X80 SHRINK-IN HOLDERS

Item #: TG604504371
Manufacturer: Tungaloy
Mfg #: 4504371

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - .0090

HSK E 63 SRK 10X85 SHRINK-IN HOLDER

Item #: TG604504374
Manufacturer: Tungaloy
Mfg #: 4504374

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - .0090

EN2804TX17 4" X 17'

Item #: SE82EN2804TX17
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
•Actual Weight - 17.3000 •Dimensions - Height: 4.00 Length: 19.0 Width: 10.0

36 x 3/16 x 5 - Oversize Air Hardening Flat Stock

Item #: LY4657388
Manufacturer: Starrett
Mfg #: 57388

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 3/16 *Width: 5

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 10.3300

3/16 x 18" - Carbide Tipped Work Rest Blades (Thru-Feed)

Item #: MG93223900
Manufacturer: Workblades
Mfg #: 223900

Technical Specifications:
*Brand Name: Workblades *Size: 3/16 x 18 *Type: Carbide Tipped Work Rest Blades

Description:
*Centerless Grinding Carbide Tipped Work Rest Blades

Shipping Info:
*Actual Weight - 16.0000

JK 130 R8 KEYLS CHUK

Item #: HK5031411
Manufacturer: Jacobs
Mfg #: 31411

Technical Specifications:
*Brand Name: Jacobs

Description:


Shipping Info:
*Actual Weight - 3.2000

DIN69871 50 EM50X125E B EM HOLDERS

Item #: TG604511666
Manufacturer: Tungaloy
Mfg #: 4511666

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - .0090

M16 - 2.00 x 150mm - Black Finish Heat Treated Alloy Steel - Cap Screws - Socket Head

Item #: SH6016150
Manufacturer: Brighton Best
Mfg #: 532277

Technical Specifications:
*Box Qty.: 10 *Brand Name: Brighton Best *Coating: Black Finish *Hex Key: 14 mm *Length: 150 *Material: Heat Treated Alloy Steel *Screw Style: Cap Screws - Socket Head *Size: M16 - 2.00 *Thread: Metric

Description:
*Ideal for precision assembly work with close tolerances, and applications needing a well-tooled appearance *Supplies greater tensile strength than equivalent sizes of grade 8.8 and 10.9 socket cap screws *Metric socket cap screws are internally wrenched, and are black finished in appearance *Grade 12.9 heat treated alloy steel *World Class Quality

Shipping Info:
*Actual Weight - .5724

Belt Skimmer - Poly - 18"

Item #: NY40BPF118
Manufacturer: Zebra Skimmers
Mfg #: BPF1-18

Technical Specifications:
•Brand Name: Zebra Skimmers •Material: Polyurethane •Maximum Temperature: 80°F •Removal Rate: 28 RPM •Size: 18 •Type: Skimmers

Description:
•Improves coolant performance and life •Heavy-duty steel, powder coated construction •Removable, easy-to-clean collection tray •Self-tensioning belt on fixed lower pulley •Dual wiper set with Lifetime warranty •Continuous-duty, 28 rpm fan-cooled motor •2" Diameter minimum access required •Recommended accessory: Zebra Diverter™ •Two year warranty on all other parts (except steel belts)

Shipping Info:
•Actual Weight - 12.8000 •Shipping Weight - 17.0000 •Dimensions - Height: 8.80 Length: 25.0 Width: 9.80

10MX70 PULL DOWEL W/FLATS (20)

Item #: SM5210070F
Manufacturer: Brighton Best
Mfg #: 548388

Technical Specifications:
*Brand Name: Brighton Best

Description:
*World Class Quality

Shipping Info:
*Actual Weight - 1.9200