3932772502085A DRILL SLIDE

Item #: FF8379305
Manufacturer: Sandvik Coromant
Mfg #: 5760591

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 1.0509

9/16 Clamping Kit 60 Piece Set-Up Kit

Item #: SG6645205
Manufacturer: Jergens
Mfg #: 45205

Technical Specifications:
*Brand Name: Jergens *Strap Length: 2-1/2, 4, 6 *Stud Size: 1/2-13 *Table T-Slot Size: 9/16 *Type: Clamping Kit 60 Piece Set-Up Kit *Weight: 20 lbs

Description:
*Kit Includes: *Six Table Saver T-Nuts *Twenty Four Studs: Four Each of 3, 4, 5, 6, 7, 8" lengths *Twelve Fine Pitch Steel Step Blocks *Six Flange Nuts *Six Steel Heel Straps *One Wooden Holder

Shipping Info:
*Actual Weight - 26.0000 *Dimensions - Height: 5.00 Length: 18.5 Width: 9.50

BT40 ER16X150 BIN UNIQUE BALANCE

Item #: TG604509048
Manufacturer: Tungaloy
Mfg #: 4509048

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - .0090

11/16 Clamping Kit 60 Piece Set-Up Kit

Item #: SG6645204
Manufacturer: Jergens
Mfg #: 45204

Technical Specifications:
*Brand Name: Jergens *Strap Length: 2-1/2, 4, 6 *Stud Size: 1/2-13 *Table T-Slot Size: 11/16 *Type: Clamping Kit 60 Piece Set-Up Kit *Weight: 20 lbs

Description:
*Kit Includes: *Six Table Saver T-Nuts *Twenty Four Studs: Four Each of 3, 4, 5, 6, 7, 8" lengths *Twelve Fine Pitch Steel Step Blocks *Six Flange Nuts *Six Steel Heel Straps *One Wooden Holder

Shipping Info:
*Actual Weight - 26.0500 *Dimensions - Height: 5.00 Length: 20.0 Width: 10.0

5/8 Clamping Kit 60 Piece Set-Up Kit

Item #: SG6645206
Manufacturer: Jergens
Mfg #: 45206

Technical Specifications:
*Brand Name: Jergens *Strap Length: 2-1/2, 4, 6 *Stud Size: 1/2-13 *Table T-Slot Size: 5/8 *Type: Clamping Kit 60 Piece Set-Up Kit *Weight: 20 lbs

Description:
*Kit Includes: *Six Table Saver T-Nuts *Twenty Four Studs: Four Each of 3, 4, 5, 6, 7, 8" lengths *Twelve Fine Pitch Steel Step Blocks *Six Flange Nuts *Six Steel Heel Straps *One Wooden Holder

Shipping Info:
*Actual Weight - 25.6500 *Dimensions - Height: 5.00 Length: 20.0 Width: 10.0

3/4 x 1 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369570
Manufacturer: Starrett
Mfg #: 69570

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 3/4 *Width: 1

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.6500

JLP-A Series 3 Ton Lever Hoist, 5' Lift

Item #: RR51287500
Manufacturer: Jet
Mfg #: 287500

Technical Specifications:
•Brand Name: Jet •Capacity: 3 Ton •Handle: 16-1/7 •Headroom: 18-8/9 •Hook Opening: 2-1/2 •Lift Height (ft): 5 •Load Chain Diameter: 10 x 30 •Model Number: JLP-300A-5 •Overall Width (inch): 7-7/8 •Type: Lever Hoist •Weight: 43 lbs

Description:
•JET® JLP-A Series lever hoists combine safety, reliability, and durability that are designed to perform in light duty industrial applications •Safety features such as optional overload protection prevents the lever hoist from lifting or pulling damaging loads above its rated capacity •JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading •The JET® JLP-A lever hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, 20 and 30 feet •The JET® JLP-A is the perfect choice for a contractor grade lever hoist •Lifetime Warranty

Shipping Info:
•Actual Weight - 44.0000

#TM-C113F Longitudinal Feed - Inch

Item #: PR61TMC113F12
Manufacturer: PRM
Mfg #: :

Technical Specifications:
•Brand Name: PRM

Description:
•Replacement Parts for PRM Model 950 Mill

Shipping Info:
•Actual Weight - 1.0000

3/4 x 1 x 36 - High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4269342
Manufacturer: Starrett
Mfg #: 69342

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 3/4 *Width: 1

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 7.6500

JLP-A Series 3 Ton Lever Hoist, 5' Lift & Shipyard Hooks

Item #: RR51287800
Manufacturer: Jet
Mfg #: 287800

Technical Specifications:
•Brand Name: Jet •Capacity: 3 Ton •Handle: 16-1/7 •Headroom: 18-8/9 •Hook Opening: 2-1/2 •Lift Height (ft): 5 •Load Chain Diameter: 10 x 30 •Model Number: JLP-300A-5SH •Overall Width (inch): 7-7/8 •Type: Lever Hoist •Weight: 43 lbs

Description:
•JET® JLP-A Series lever hoists combine safety, reliability, and durability that are designed to perform in light duty industrial applications •Safety features such as optional overload protection prevents the lever hoist from lifting or pulling damaging loads above its rated capacity •JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading •The JET® JLP-A lever hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, 20 and 30 feet •The JET® JLP-A is the perfect choice for a contractor grade lever hoist •Lifetime Warranty

Shipping Info:
•Actual Weight - 45.0000

18 x 1-1/4 x 6 - Oil Hardening Flat Stock

Item #: LY5011608
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1-1/4 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 38.8700

#256MRL-25 -  0 - 25mm Measuring Range - .01mm Graduation - Ratchet Thimble - High Speed Steel Face - Disc Micrometer

Item #: MV7051238
Manufacturer: Starrett
Mfg #: 51238

Technical Specifications:
•Brand Name: Starrett •Face: High Speed Steel •Graduation: 0.01mm •Measuring Range: 0 - 25mm •Model Number: 256MRL-25 •Thimble Type: Ratchet •Type: Disc Micrometer

Description:
•Ratchet thimble •Spindle lock •Disc - 1/2" diameter, 1/16" thick, and .015" edge thickness •Satin-chrome finish on reading surface •0-1" Size useful to measure thickness of paper, rubber, plastic, etc. •To take measurements on work sections such as ribs, lands, fins, cutting edge on forming tool and cordial thickness on gear teeth

Shipping Info:
•Actual Weight - .4000

PELTOR ARTILLERY EARMUFF 88076

Item #: KB3588076
Manufacturer: 3M
Mfg #: 1007837188

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 7.8034

10T 6" THREAD HOLE S/A CYLINDER

Item #: KP306CT10T06
Manufacturer: Williams
Mfg #: 9923189

Technical Specifications:
•Brand Name: Williams

Description:


Shipping Info:
•Actual Weight - 10.8600

#WE24-230 - 9" Angle Grinder

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK A 100 ER40X100 COLLET HOLDERS

Item #: TG604561157
Manufacturer: Tungaloy
Mfg #: 4561157

Technical Specifications:
*Brand Name: Tungaloy

Description:


Shipping Info:
*Actual Weight - .0090

5/8 x 4 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657620
Manufacturer: Starrett
Mfg #: 57620

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 5/8 *Width: 4

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 12.7500

M36.0-4.00 6G LH GO/NO-GO SET PLUG

Item #: EY52372576030
Manufacturer: Vermont Gage
Mfg #: 372576030

Technical Specifications:
•Brand Name: Vermont Gage

Description:


Shipping Info:
•Actual Weight - 1.5500

TOOL PKG DIGIMATIC IN W/1"

Item #: MT8064PKA152
Manufacturer: Mitutoyo
Mfg #: 64PKA152

Technical Specifications:
•Brand Name: Mitutoyo •Model Number: 64PKA152 •Set Contains: QuantuMike; 293-185-30, Digimatic Caliper; 500-196-30, mahogany Case; 64PPP932 •Type: Tool Kit

Description:
Includes: •QuantuMike; 293-185-30 •Digimatic Caliper; 500-196-30 •Mahogany Case; 64PPP932

Shipping Info:
•Actual Weight - .9546 •Addl Fee Under 70lb -$14.25 per item

CAT+40 x ER16 x 6" H Collet Chuck

Item #: GM20434011676
Manufacturer: Rego-Fix
Mfg #: 4340.11676

Technical Specifications:
*Brand Name: Rego-Fix *Collet Style: ER16 *Description: CAT+40 / ER16 x 6" H *Head Length/Projection: 6.00 *Mount: CAT+40 *Nose Diameter: 1.11 *Type: Standard *Wrench Number: 7112.16010

Description:
*Case hardened to 58-62 HRc *Pre-balanced to G2.5 @ 22,000 RPM's *T.I.R. from the collet cavity to the holder taper 0.0001" or better *Lot Numbers for lot traceability *Through the spindle coolant or through the flange version available *BT & CAT+ have Hi-Q clamping nut included *AT3 or beter tapers guaranteed *Superior surface finish at 0.25Ra for better fit and accuracy *Swiss made to ISO 90001 *Big Plus System - Licensed by Big Daishowa

Shipping Info:
*Actual Weight - .2500