#567 - 1-7/8 x 1-7/8 x 3'' - V-Block & Clamp Set

Item #: MV7052588
Manufacturer: Starrett
Mfg #: 52588

Technical Specifications:
•Brand Name: Starrett •Description: Set Complete, with One V Block and One Clamp •Model Number: 567 •Number of Blocks: 1 •Size: 1-7/8 x 1-7/8 x 3 •Type: V-Block & Clamp Set

Description:
•Can be used on base, end, and flat on either side as clamp is within outside width of block. Clamp is provided with an adjustable side screw with caps to support block and prevent tilting. Groove at stepped end at right angle to base and is handy for holding shouldered studs, round pins, etc. Hole clearance for drilling and remove dowel pins provided. Block has four 3/8-16 tapped holes, two in base and one on each side to attach angle iron. Angle iron holding block can then be attached to lathe face-plate or held by magnetic chuck. Block made of hardened steel. Sides are ground parallel and the groove central and parallel to sides and base. Size 1-7/8 inches square, base length about 3-1/2 inches.

Shipping Info:
•Actual Weight - 2.1500 •Dimensions - Height: 3.70 Length: 6.30 Width: 3.50

25-2081J INDICATOR

Item #: MV7056225
Manufacturer: Starrett
Mfg #: 56225

Technical Specifications:
•Brand Name: Starrett •Model Number: 25-2081J

Description:


Shipping Info:
•Actual Weight - 1.0000

90503 TEGADERM AG MESH DRESSING

Item #: KB3556533
Manufacturer: 3M
Mfg #: 5070738756

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:

#260Z - .050 - 1.05'' Measuring Range - .001 Graduation - Hardened & Ground Face - Groove Micrometer

Item #: MV7067987
Manufacturer: Starrett
Mfg #: 67987

Technical Specifications:
•Brand Name: Starrett •Face: Hardened & Ground •Graduation: .001 •Land Width: 0 - 1 •Measuring Face Diameter: 9/32 •Measuring Range: .050 - 1.05 •Model Number: 260Z

Description:
•Graduated in .001" with reach of 1-5/8" max. hole depth •Satin chrome finish with quick reading, staggered graduations •Discs have 9/32" OD .025" thick-hardened, ground, and lapped •For measuring either internal or external groove and lands

Shipping Info:
•Actual Weight - 1.1500 •Dimensions - Height: 1.40 Length: 8.30 Width: 5.10

V-150 VERSAFLO VORTEX COOLING TUBE

Item #: KB3566164
Manufacturer: 3M
Mfg #: 0005113866

Technical Specifications:
•Brand Name: 3M

Description:


Shipping Info:
•Actual Weight - 1.1950

HAZ05 1 QT SCOTCHWELD EPOXY

Item #: KB3520345
Manufacturer: 3M
Mfg #: 0002120020

Technical Specifications:
•Brand Name: 3M •Hazard Code: HAZ05 •Size: 1 Quart

Description:


Shipping Info:
•HAZ 05 •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 3.5910

506-MLBLSC HOLD-DOWN ACTION CLAMP

Item #: MA49506MLBLSC
Manufacturer: De-Sta-Co
Mfg #: 506-MLBLSC

Technical Specifications:
*Brand Name: De-Sta-Co

Description:


Shipping Info:
*Actual Weight - 5.7000

HAZ06 50 GAL SCOTCHWELD ADHESIVE

Item #: KB3596507
Manufacturer: 3M
Mfg #: 0002120096

Technical Specifications:
•Brand Name: 3M •Hazard Code: HAZ06 •Size: 50 Gallon

Description:


Shipping Info:
•HAZ 06 •UPS Ground - Commercial TruckOnly, Call for Charges •UPS Air - Commercial Truck Only, Call for Charges •Commercial Truck - CommercialTruck Only, Call for Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 450.0000

1/4 x 4 x 36 - High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4269295
Manufacturer: Starrett
Mfg #: 69295

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1/4 *Width: 4

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 10.2000

7/8 x 1-1/4 x 36 - Oversize Air Hardening Flat Stock

Item #: LY4657449
Manufacturer: Starrett
Mfg #: 57449

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 7/8 *Width: 1-1/4

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 11.1500

HAZ05 18V HD XRP JIGSW KT

Item #: PD20DC330K
Manufacturer: DeWALT
Mfg #: DC330K

Technical Specifications:


Description:


Shipping Info:
•HAZ 5C •UPS Ground - No Additional Shipping Charges •UPS Air - Cannot Ship Air •Commercial Truck - Call for Shipping Charges •Note: The additional charges are controlled by UPS and are subject to change. •Actual Weight - 12.7500 •Dimensions - Height: 5.25 Length: 16.0 Width: 14.2 •Additional handling -$15.00 per item

Proto® 1/4" Drive 37 Piece Socket, Combination Set - 6 Point

Item #: KP4280420
Manufacturer: Proto
Mfg #: J47120XL

Technical Specifications:
•Brand Name: Proto •Drive: 1/4 •Finish: Full Polish •Model Number: J47120XL •Number of Pieces: 37 •Points: 6 •Set Includes: 6 Point Standard: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 Inch. 6 Point Deep: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 Inch. 8 Point Standard: 1/4, 5/16, 3/8 Inch. Accessories: Premium Ratchet, Socket Driver, 2, 3, and 6 In •Style: Mixed

Description:
•Proto® 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials •The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners •The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage •The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners

Shipping Info:
•Actual Weight - 4.2900 •Dimensions - Height: 2.10 Length: 13.6 Width: 10.9

Jet Stand for Shear; Brake & Roll - #S40N

Item #: PY60754040
Manufacturer: Jet
Mfg #: 754040

Technical Specifications:
•Brand Name: Jet •Comments: For Model SBR40M •Dimensions: 49 x 21 •Height: 30" •Model Number: SRS40N •Shipping Weight: 82 lbs •Type: Stand for Shear, Brake & Roll

Description:
•For Bench Model Hand Brakes, Box and Pan Brakes, Slip Rolls and Combo Shear, Brake and Roll •FITS Model Number SBR-40N

Shipping Info:
•Actual Weight - 90.0000 •Addl Fee Over 70lb-$23.00 per item

CORD REEL WITHOUT CORD

HSK-A63 2.36 Face Mill Arbor

Item #: HA70A63050112Z
Manufacturer: Haimer USA LLC
Mfg #: A63.050.11

Technical Specifications:
*Brand Name: Haimer USA LLC *Flange Diameter: 1.67 *Gage Length: 2.36 *Model Number: A63.050.11/2Z *Shank: HSK-A63 *Type: HSK Face Mill Arbor

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *All functional surfaces precision ground *

Shipping Info:

CAT40 SRKIN 1/2X3.750 CX

Item #: EH4517246
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
*Actual Weight - 2.5000

CAT40 SRKIN 1/4X3.500 CX

Item #: EH4517231
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
*Actual Weight - 2.5000

CAT50ER40X4.000B ROTARY TOOLING

Item #: IC104502831
Manufacturer: Ingersoll Cutting Tools
Mfg #: 4502831

Technical Specifications:
*Brand Name: Ingersoll Cutting Tools

Description:


Shipping Info:

CAT40 SRKIN 5/8X3.750 CX

Item #: EH4517247
Manufacturer:
Mfg #:

Technical Specifications:


Description:


Shipping Info:
*Actual Weight - 2.5000

C5A3904545040 CAPTO HOLDER

Item #: FF8100701
Manufacturer: Sandvik Coromant
Mfg #: 5728575

Technical Specifications:
*Brand Name: Sandvik Coromant

Description:


Shipping Info:
*Actual Weight - 4.0854