BES Up To 2022 $250-$5000 Products - (25001 Products)
CAT50 3/4 x 3.15 Power Shrink Fit Chuck
Item #: HA715084034Z36
Manufacturer: Haimer USA LLC
Mfg #: 50.840.3/4
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Haimer USA LLC
*Gage Length: 3.15
*Model Number: 50.840.3/4Z.36
*Outside Diameter: 1.65
*Shank: CAT50
*Type: Power Shrink Fit Chuck
Description:
*Shrink fit chuck suitable to all inductive shrink fit units
*Precesion AT3 Tolerance Shank
*Balanced to G2.5 at 25,000 RPM or U < 1 gmm
*Taper tolerance AT3
*High runout accuracy < 3µ¼m
*Low tendency towards vibrationos by optimized outer geometry
*Slim desgin at the top
*Very rigid shank
*Dirt groove in the clamping bore for safe clamping force
*Coolant supply fromr ADB
*Cool Jet, can be sealed
*Made in Germany
Shipping Info:
*Actual Weight - 7.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 6mm x 80mm Power Shrink Fit Chuck
Item #: HA71508400636
Manufacturer: Haimer USA LLC
Mfg #: 50.840.06.
Technical Specifications:
*Bore Diameter: 6mm
*Brand Name: Haimer USA LLC
*Gage Length: 80mm
*Model Number: 50.840.06.36
*Outside Diameter: 27mm
*Shank: CAT50
*Type: Power Shrink Fit Chuck
Description:
*Precesion AT3 Tolerance Shank
*Balanced to G2.5 at 22,000 RPM
*Highest Possible Clamping Force
*< 3-micron T.I.R.
*All functional surfaces precision ground
Shipping Info:
*Actual Weight - 7.5800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER16 x 8" Collet Chuck
Item #: GM20884313031
Manufacturer: Rego-Fix
Mfg #: 8843.13031
Technical Specifications:
*Brand Name: Rego-Fix
*Collet Style: ER16
*Description: CAT40 / ER16 x 8" XL
*Gage Length: 8.00
*Head Length/Projection: 8.00
*Mount: CAT40
*Nose Diameter: 1.11
*Nut Diameter: 1.11
*Spindle Interface: CAT40
*Type: Extra Long
*Weight: 4.5 lbs
Description:
*Case hardened to 58-62 HRc
*Pre-balanced to G2.5 @ 22,000 RPM's
*T.I.R. from the collet cavity to the holder taper 0.0001" or better
*Lot Numbers for lot traceability
*Through the spindle coolant or through the flange version available
*BT & CAT+ have Hi-Q clamping nut included
*AT3 or beter tapers guaranteed
*Superior surface finish at 0.25Ra for better fit and accuracy
*Swiss made to ISO 90001
*Big Plus System - Licensed by Big Daishowa
Shipping Info:
*Actual Weight - 4.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
C5MAS01 GAUGE
Item #: FF8651429
Manufacturer: Sandvik Coromant
Mfg #: 5728549
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - 3.0690
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Quick Change Tool Post and Four Holder Sets - Series CXA
Item #: GG3031000
Manufacturer: Aloris
Mfg #: #3-BS
Technical Specifications:
*Brand Name: Aloris
*Holders Included: No. 1, 2, 4, & 7
*Series: CXA
*Swing: 13 to 18
Description:
*Quick Change Tool Post & Four Holder Set
*AXA, BXA, CXA, CA, DA and EA Sets Include:
*1 Tool post and 4 holders
*No. 1 turning and facing holder
*No. 2 boring, turning and facing holder
*No. 4 heavy-duty boring bar holder
*No. 7 universal parting blade holder
Shipping Info:
*Actual Weight - 23.6500
*Dimensions - Height: 5.59 Length: 10.3 Width: 7.63
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Hsk 100A Tension & Compression Holder Size 1 WFLK Series
Item #: GM2538018090
Manufacturer: Bilz
Mfg #: 38018090
Technical Specifications:
*Adaptor Size: 1
*Brand Name: Bilz
*Gage Length: 4.29
*Nose Diameter: 1.53
*Shank Size: HSK100A
*Tap Range (Fractional): #0 to 9/16
*Tap Range (Metric): M3 to M12
*Tap Range (Pipe): 1/8
*Tension Compression: .300
*Type: Tension & Compression
Description:
*The Bilz Tapping System is designed for rapid ans easy tap adapter change, which are automatically locked into position om the insertion into the tapping chuck
*Modular quick change design provides the ultimate in machining flexibility
*Allows a single tap chuck to accept a range of tap shank diameters inch or metric, without a complete change in machine or tool holding setup.
*Industry standard for quick change tapping
*Widest range of sizes available
*Tension Compression or Rigid in many configurations
*Hign pressure coolant through available
*Made in Germany
Shipping Info:
*Actual Weight - 6.8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SCK1-B / HSK-A63 M4-M12 x 95.5 Synchro Chuck
Item #: GM265011971
Manufacturer: Bilz
Mfg #: 5011971
Technical Specifications:
*Brand Name: Bilz
*Collet Style/Fits: ER20-GB
*Coolant Thru: No
*Gage Length: 95.5
*Nose Diameter: 34
*Shank Size: HSK-A63
*Style: SCK1-B
*Tap Size: M4-M12
*Tension Compression: +/-0.15
*Type: SCK1-B / HSK-A63 Synchro Chuck
Description:
Shipping Info:
*Actual Weight - 3.2000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/4 x 12 - Oil Hardening Flat Stock
Item #: LY5104815
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/4
*Width: 12
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 92.7600
*Addl Fee Over 70lb - $19.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1-1/2 x 4 - Oil Hardening Flat Stock
Item #: LY4054534
Manufacturer: Starrett
Mfg #: 54534
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1-1/2
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 61.8700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/2 x 2 x 36 - Air Hardening Flat Stock
Item #: LY4557694
Manufacturer: Starrett
Mfg #: 57694
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1-1/2
*Width: 2
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 30.6000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M24-3.00 X 150MM 8.8 ZINC
Item #: SN60I000865
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - .1500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4X3-3/4 SCK HD SHOULDER (10)
Item #: SK521260
Manufacturer: Brighton Best
Mfg #: 221240
Technical Specifications:
*Brand Name: Brighton Best
Description:
*World Class Quality
Shipping Info:
*Actual Weight - .6280
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.0581N
Item #: 19710318
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.0581NProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00004/-.00000
Blank Number Wire Size
#7
Inner Diameter (Decimal Inch)
2.0581
Calibrated
No
Traceability Certification Included
No
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
RSX56000R Milling Cutter
Item #: FJ132200WF0
Brand: Sumitomo
Model #: 2200WF0
| Product Specifications | |
|---|---|
| Cutting Diameter (DC/DCX) | 6″ |
| Overall Length (OAL) | 1″ |
| Cutting Diameter Maximum (DCX) | 6″ |
| Hub Diameter (DHUB) | 4.38″ |
| Cutting Item Count (CICT) | 9 |
| Master Insert Identification (MIID) | #16 |
| Connection Diameter Machine Side (DCONMS) | 1-1/2″ |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
35B6G-25039D1R01
Item #: IC522919677
Brand: Ingersoll
Model #: 2919677
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-1/2″ |
| Cutting Width (CW) | 0.394″ |
| Cutting Item Count (CICT) | 8 |
| Overall Length (OAL) | 2″ |
| Cutting Depth Maximum (CDX) | 0.54″ |
| Application | | Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Measurement Type | Inch |
| Hub Diameter (DHUB) | 1.58″ |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
KM63XMZ4XSTAR2020Y 4 SLOT SQUARE SHANK HOLDER FOR
Item #: WK531725301
Brand: Widia
Model #: 1725301
| Product Specifications | |
|---|---|
| Shank Type | KM |
| Work Piece Shank Width | 20 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Work Piece Shank Height | 20 mm |
| Style | 4 Side Mount |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TRLGCH15.06X1830-U05
Item #: TG254851626
Brand: Tungaloy
Model #: 4851626
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.593″ |
| Overall Length (OAL) | 72.126″ |
| Usable Length (LU) | 68.465″ |
| Point Length (PL) | 0.079″ |
| Application | | Gundrill | |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 1-1/4″ |
| Master Insert Identification (MIID) | TOHT07... |
| Tool Type | Deep Hole / Gun Drill |
| Body Material | Steel |
| Shank Length (LS) | 2.756″ |
| Decimal Equivalent | 0.593″ |
| Functional Length (LF) | 72.047″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7″ (178 mm) Dia. Right Angle Disc Sander
Item #: PF3052567
Brand: Dynabrade
Model #: 52567
| Product Specifications | |
|---|---|
| Disc Diameter | 7″ |
| Type of Power | Pneumatic |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TRLGCH14.68X1830-U05
Item #: TG254851625
Brand: Tungaloy
Model #: 4851625
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.578″ |
| Overall Length (OAL) | 72.126″ |
| Usable Length (LU) | 68.504″ |
| Point Length (PL) | 0.079″ |
| Application | | Gundrill | |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 1-1/4″ |
| Master Insert Identification (MIID) | TOHT07... |
| Tool Type | Deep Hole / Gun Drill |
| Body Material | Steel |
| Shank Length (LS) | 2.756″ |
| Decimal Equivalent | 0.578″ |
| Functional Length (LF) | 72.047″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ECR-B325-25/74C25R40A130C IC08
Item #: EH562616699
Brand: Iscar
Model #: 2616699
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Applicable Material | | Non Ferrous Metals | |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Application | | Counter Boring | Drill Mill | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 25 mm |
| Corner Radius (RE) | 4 mm |
| Overall Length (OAL) | 130 mm |
| Ramping Angle Maximum (RMPX) | 20 Degrees |
| Cutting Edge Material | Carbide |
| Grade | IC08 |
| Coating | Uncoated |
| Tool Type | Solid carbide center cutting endmills 90° |
| Flute Count (NOF) | 3 |
| Maximum Feed per Tooth (fz(max)) | 0.25 mm/tooth |
| Flute Helix Angle (FHA) | 45 Degrees |
| Minimum Feed per Tooth (fz(min)) | 0.1 mm/tooth |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Measurement Type | Metric |
| Usable Length (LU) | 74 mm |
| Connection Code Machine Side (CCMS) | Cylindrical |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It