BES Up To 2022 $100-$250 Products - (25001 Products)
11/32 STD SQUARE BROACH
Item #: FB5513022
Manufacturer: Hassay Savage
Mfg #: 13022
Technical Specifications:
*Brand Name: Hassay Savage
*Broach: Square Broach
*Maximum Cut: 1-1/4
*Minimum Cut: 3/8
*Square Size: 11/32
Description:
Shipping Info:
*Actual Weight - .3130
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HAZ05 18V WET\DRY HND VAC
Item #: PD20DC515K
Manufacturer: DeWALT
Mfg #: DC515K
Technical Specifications:
Description:
Shipping Info:
•HAZ 5C
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 7.7500
•Dimensions - Height: 6.50 Length: 8.38 Width: 18.8
•Additional handling -$15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#SW1 - SW-1 Data Acquisition Software
Item #: NA43SW1
Manufacturer: Imada
Mfg #: SW1
Technical Specifications:
•Brand Name: Imada
•Class: Testing Equipment
•Description: SW-1 Data Acquisition Software
•Type: SW-1 Data Acquisition Software
Description:
•Use SW-1 to capture and display the current value and calculate max/min, average, and standard deviation
•Use buttons on the spreadsheet to operate the gauge from your computer
•The optional DB-1 data button works with SW-1 software to further automate data acquisition
•Enter peak measurements into the spreadsheet and zero the gauge with just a touch of the button
•Save unnecessary time at the computer and gauge for more efficient testing.
•Full SPC and Graphing Capabilities
•Designed for Imada Gauges
•Automates Your Data Collection
Shipping Info:
•Actual Weight - 1.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
INSULATED METRIC HEX L-KEY 10 PC SET
Item #: KN5413693
Manufacturer: Wiha
Mfg #: 13693
Technical Specifications:
•Brand Name: Wiha
Description:
Shipping Info:
•Actual Weight - 2.2600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5 Gallon Rustlick 606 Rust Inhibitor Fluid
Item #: LK6071052
Manufacturer: Rustlick
Mfg #: 71052
Technical Specifications:
•Brand Name: Rustlick
•Hazard Code: HAZ05
•Size: 5 Gallon
•Temperature Range: 175°F (FlashPoint)
•Type: Rust Inhibitor
Description:
•Penetrates into hard to reach nooks and crannies aborbing water and moisture
•Easy application by dipping or brushing
•Non-conductive and non-flammable
•Can be used on wet-parts with blind holes
•Clear-transparent film provides long-term indoor rust
Shipping Info:
•HAZ 05
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 35.8500
•Dimensions - Height: 15.0 Length: 12.0 Width: 12.0
•Addl Fee Under 70lb - $14.25 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 ER32 SHORT L44.55 UNIQUE SHRT
Item #: TG604501656
Manufacturer: Tungaloy
Mfg #: 4501656
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - .0090
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DIN69871 40 ER32 SHORT UNIQUE SHORT
Item #: TG604509194
Manufacturer: Tungaloy
Mfg #: 4509194
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - .0090
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 1 ENDMILL HOLDERS
Item #: TG604590426
Manufacturer: Tungaloy
Mfg #: 4590426
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - 12.4000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
No. 20 Universal Tool Holder - Series BXA-BX
Item #: GG3020020
Manufacturer: Aloris
Mfg #: BXA-20
Technical Specifications:
*Brand Name: Aloris
*Cartridge: CRT20
*Height: 1-3/4
*Series: BXA-BX
*Tool Holder Capacity: 1-3/16
Description:
*No. 20 Universal Tool Holder
*For right or left hand turning, facing and chamfering
*Two direction cartridge is easy to adjust to every 15° lead angle
Shipping Info:
*Actual Weight - 2.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 4 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054930
Manufacturer: Starrett
Mfg #: 54930
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 3/16
*Width: 4
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 5.1000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/32 x 4 - Oil Hardening Flat Stock
Item #: LY4054334
Manufacturer: Starrett
Mfg #: 54334
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/32
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 6.4500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 3/8 x 7 - Oil Hardening Flat Stock
Item #: LY5002418
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/8
*Width: 7
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 13.5300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DKS-VT+5 LOW-PROFILE CLAMP WITH
Item #: SG66DK2VT5
Manufacturer: Jergens
Mfg #: DK2-VT+5
Technical Specifications:
*Brand Name: Jergens
Description:
Shipping Info:
*Actual Weight - .0100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DK2-VTI+5 LOW-PROFILE CLAMP WITH
Item #: SG66DK2VTI5
Manufacturer: Jergens
Mfg #: DK2-VTI+5
Technical Specifications:
*Brand Name: Jergens
Description:
Shipping Info:
*Actual Weight - .0100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TNFPAD-XL 5R-60T40-JHP
Item #: EH233368876
Brand: Iscar
Model #: 3368876
| Product Specifications | |
|---|---|
| Cutting Depth Maximum (CDX) | 1.575″ |
| Application | | Face Grooving | Face Grooving Along Shaft | |
| Cutting Width (CW) | 0.197″ |
| Tool Type | Face Turning & grooving Tools |
| Cutting Direction (HAND) | Right Hand |
| Body Material | Steel |
| Axial Groove Outside Diameter Maximum (DAXX) | 3.54″ |
| Functional Width (WF) | 0.315″ |
| Axial Groove Outside Diameter Minimum (DAXN) | 2.36″ |
| Measurement Type | Inch |
| Overall Length (OAL) | 3.346″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DGAQ D120-4-4Z-JHP
Item #: EH233367519
Brand: Iscar
Model #: 3367519
| Product Specifications | |
|---|---|
| Body Width (WB) | 0.126″ |
| Application | | Ext. Grooving | Parting | |
| Cutting Width Minimum (CWN) | 0.157″ |
| Body Material | Steel |
| Cutting Width Maximum (CWX) | 0.157″ |
| Cutting Direction (HAND) | Neutral |
| Overall Length (OAL) | 3.563″ |
| Measurement Type | Inch |
| Overall Height (OAH) | 3.563″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ECI-5 .625-3.C.125VF6 V910
Item #: EH569584515
Brand: Iscar
Model #: 3398489
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Usable Length (LU) | 3″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Application | | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 3″ |
| Corner Radius (RE) | 1/8″ |
| Overall Length (OAL) | 6″ |
| Grade | V910 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid carbide non center cutting endmills 90° |
| Coating | TiAlCN, THIKNESS 2-4 |
| Body Material | Carbide |
| Flute Count (NOF) | 5 |
| Decimal Equivalent | 0.625″ |
| Shank Type | Round |
| Measurement Type | Inch |
| End Shape | Corner Radius |
| Connection Code Machine Side (CCMS) | Cylindrical |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ECI-5 .625-3.C.06VF6 V910
Item #: EH569584356
Brand: Iscar
Model #: 3398439
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Usable Length (LU) | 3″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Application | | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 3″ |
| Corner Radius (RE) | 0.06″ |
| Overall Length (OAL) | 6″ |
| Grade | V910 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid carbide non center cutting endmills 90° |
| Coating | TiAlCN, THIKNESS 2-4 |
| Body Material | Carbide |
| Flute Count (NOF) | 5 |
| Decimal Equivalent | 0.625″ |
| Shank Type | Round |
| Measurement Type | Inch |
| End Shape | Corner Radius |
| Connection Code Machine Side (CCMS) | Cylindrical |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
EBI-5 .625-3.CVF6 V910
Item #: EH569584619
Brand: Iscar
Model #: 3398510
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Application | | Helical Interpolation | Plunging & Recessing | Profiling | Rampdown | Slotting | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Corner Radius (RE) | 0.312″ |
| Depth of Cut Maximum (APMX) | 3″ |
| Grade | V910 |
| Overall Length (OAL) | 6″ |
| Tool Type | Solid carbide non center cutting endmills 90° |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | TiAlCN, THIKNESS 2-4 |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 5 |
| Measurement Type | Inch |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Usable Length (LU) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MTECS 08067C20 24UNJ IC908
Item #: EH5606417
Brand: Iscar
Model #: 5606417
| Product Specifications | |
|---|---|
| Thread Pitch (TP) | 1.58 mm |
| Application | | Internal Thread Milling | |
| Threads per Inch (TPI) | 24 Threads/" |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Thread Standard | UNJF |THFT | |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Usable Length (LU) | 0.787″ |
| Cutting Diameter (DC) | 0.264″ |
| Measurement Type | Inch |
| Overall Length (OAL) | 2.52″ |
| Grade | IC908 |
| Flute Count (NOF) | 3 |
| Tool Type | Solid carbide thread mills |
| Coolant Supply Property (CSP) | Through Hole |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | TiAlN |
| Thread Form Type (THFT) | NJ60 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It