4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942324
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$35.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942316
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$30.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51949147
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$31.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51949055
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$36.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51985034
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$36.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51984524
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$38.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51950244
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$38.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Burr End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51984532
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Burr end router bits are used for bottom cutting and producing floor finishes on the part where minimal material needs to be removed. They are used in very light applications.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Burr
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Burr

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$31.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942522
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$35.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51988111
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$27.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942514
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$35.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51949576
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$31.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51949592
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$36.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2-1/2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51984821
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2-1/2
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2-1/2

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$36.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51950194
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$31.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51949196
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$38.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, Drill Point End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 3" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51984516
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Drill point ends are ideal for producing clean cuts in aggresive milling applications. Some drill point bits are made of composite material for increased tool performance.

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	Drill Point
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	3
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type Drill Point

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 3

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$38.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942506
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	End Mill
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	ZrN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type End Mill

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating ZrN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$35.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51988103
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	End Mill
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	AlTiN
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type End Mill

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating AlTiN

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$35.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Diam, 3/4" LOC, End Mill End, Solid Carbide Diamond Pattern Router Bit - Right Hand Cut, 2" OAL, 1/4" Shank Diam, Use on Carbon & Honeycomb, Carbon Fiber, Composite, Fiberglass, Graphite

Item #: 51942563
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

End Mill router bits are used for bottom cutting and are designed to produce a smooth surface with a square corner

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.

Product Specifications
Cutting Diameter (Inch)	1/4
Cutting Diameter (Decimal Inch)	0.2500
End Type	End Mill
Length of Cut (Decimal Inch)	0.7500
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	1/4
Overall Length (Inch)	2
Material	Solid Carbide
Finish/Coating	Uncoated
Material Application	Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite
Cutting Direction	Right Hand

Product Specifications

Cutting Diameter (Inch) 1/4

Cutting Diameter (Decimal Inch) 0.2500

End Type End Mill

Length of Cut (Decimal Inch) 0.7500

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 1/4

Overall Length (Inch) 2

Material Solid Carbide

Finish/Coating Uncoated

Material Application Carbon & Honeycomb; Carbon Fiber; Composite; Fiberglass; Graphite

Cutting Direction Right Hand

$30.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It