CAT50 10mm x 200mm Power Shrink Fit Chuck

Item #: HA7150846103
Manufacturer: Haimer USA LLC
Mfg #: 50.846.10.

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Haimer USA LLC *Gage Length: 200mm *Model Number: 50.846.10.3 *Outside Diameter: 32mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 9.2500

$1,080.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm x 60mm - Shrink Fit Tool Holder

Item #: GM94C50M101609
Manufacturer: Parlec
Mfg #: C50-M10SF1

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: C50-M10SF160-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm x 80mm Power Shrink Fit Chuck

Item #: HA71508401026
Manufacturer: Haimer USA LLC
Mfg #: 50.840.10.

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 50.840.10.26 *Outside Diameter: 32mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.0000

$844.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm x 80mm Power Shrink Fit Chuck

Item #: HA7150840103
Manufacturer: Haimer USA LLC
Mfg #: 50.840.10.

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 50.840.10.3 *Outside Diameter: 32mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.0000

$908.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm x 80mm Shrink Fit Chuck

Item #: HA7150840104
Manufacturer: Haimer USA LLC
Mfg #: 50.840.10.

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 50.840.10.4 *Outside Diameter: 32mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.0000

$536.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm-100mm - Shrink Fit Holder

Item #: TE1229260
Manufacturer: Techniks
Mfg #: 29260

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Techniks *European-DIN Tool Shank Range: 10mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 10mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.39

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4268

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm-100mm - Shrink Fit Holder with Coolblast

Item #: TE1229260B
Manufacturer: Techniks
Mfg #: 29260B

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Techniks *European-DIN Tool Shank Range: 10mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 10mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.39

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4812

$368.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm-150mm - Shrink Fit Holder

Item #: TE1229262
Manufacturer: Techniks
Mfg #: 29262

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Techniks *European-DIN Tool Shank Range: 10mm *Gage Length: 150mm *Outside Diameter: 3.88 *Shank: 10mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.39

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4412

$415.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm Bore Dia. x 160mm Gage Length Shrink Fit Toolholder

Item #: GM279074155
Manufacturer: Bilz
Mfg #: 9074155

Technical Specifications:
*Bearing Surface: 47mm *Bore Diameter: 12mm *Brand Name: Bilz *Gage Length: 160mm *Outside Diameter: 34mm *Shank: CAT50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 8.7000

$534.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm Bore Dia. x 95mm Gage Length Shrink Fit Toolholder

Item #: GM279074153
Manufacturer: Bilz
Mfg #: 9074153

Technical Specifications:
*Bearing Surface: 47mm *Bore Diameter: 12mm *Brand Name: Bilz *Gage Length: 95mm *Outside Diameter: 32mm *Shank: CAT50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 7.2000

$420.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12MM SHRINK FIT HOLDER

Item #: GM76500010
Manufacturer: Lyndex
Mfg #: CAT50-SF12

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$491.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12MM SHRINK FIT HOLDER

Item #: GM76500019
Manufacturer: Lyndex
Mfg #: CAT50-SF12

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$504.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12MM SHRINK FIT HOLDER

Item #: GM76500011
Manufacturer: Lyndex
Mfg #: CAT50-SF12

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$650.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12MM SHRINK FIT HOLDER

Item #: GM76500020
Manufacturer: Lyndex
Mfg #: CAT50-SF12

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$504.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 130mm Shrink Fit Chuck

Item #: HA7150844124
Manufacturer: Haimer USA LLC
Mfg #: 50.844.12.

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Haimer USA LLC *Gage Length: 130mm *Model Number: 50.844.12.4 *Outside Diameter: 32mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.2500

$614.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 160mm - Shrink Fit Tool Holder

Item #: GM94C50M121609
Manufacturer: Parlec
Mfg #: C50-M12SF1

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: C50-M12SF160-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$423.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 160mm Power Shrink Fit Chuck

Item #: HA7150842123
Manufacturer: Haimer USA LLC
Mfg #: 50.842.12.

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Haimer USA LLC *Gage Length: 160mm *Model Number: 50.842.12.3 *Outside Diameter: 32mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 9.0000

$1,007.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 160mm Shrink Fit Chuck

Item #: HA7150842124
Manufacturer: Haimer USA LLC
Mfg #: 50.842.12.

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Haimer USA LLC *Gage Length: 160mm *Model Number: 50.842.12.4 *Outside Diameter: 32mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 9.0000

$653.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 200mm Power Shrink Fit Chuck

Item #: HA7150846123
Manufacturer: Haimer USA LLC
Mfg #: 50.846.12.

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Haimer USA LLC *Gage Length: 200mm *Model Number: 50.846.12.3 *Outside Diameter: 32mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 9.2500

$1,080.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 12mm x 80mm - Shrink Fit Tool Holder

Item #: GM94C50M12809
Manufacturer: Parlec
Mfg #: C50-M12SF8

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Parlec *Gage Length: 80mm *Model Number: C50-M12SF80-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$375.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It