CAT50 1 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C50106309
Manufacturer: Parlec
Mfg #: C50-10SF63

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C50-10SF630-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$391.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 6.30 Power Shrink Fit Chuck

Item #: HA71508421Z3
Manufacturer: Haimer USA LLC
Mfg #: 50.842.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 50.842.1Z.3 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 9.0000

$1,007.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 6.30 Power Shrink Fit Chuck

Item #: HA71508421Z37
Manufacturer: Haimer USA LLC
Mfg #: 50.842.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 50.842.1Z.37 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 9.0000

$1,365.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 6.30 Shrink Fit Chuck

Item #: HA71508421Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.842.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 50.842.1Z.4 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 9.0000

$653.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 7.87 Power Shrink Fit Chuck

Item #: HA71508461Z3
Manufacturer: Haimer USA LLC
Mfg #: 50.846.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 7.87 *Model Number: 50.846.1Z.3 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 12.5000

$1,080.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 7.87 Power Shrink Fit Chuck

Item #: HA71508461Z37
Manufacturer: Haimer USA LLC
Mfg #: 50.846.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 7.87 *Model Number: 50.846.1Z.37 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 12.5000

$1,466.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1" Bore Dia. x 4.13 Gage Length Shrink Fit Toolholder

Item #: GM279074115
Manufacturer: Bilz
Mfg #: 9074115

Technical Specifications:
*Bearing Surface: 2.44 *Bore Diameter: 1" *Brand Name: Bilz *Gage Length: 4.13 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 7.2000

$420.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1" Bore Dia. x 6.3 Gage Length Shrink Fit Toolholder

Item #: GM279074117
Manufacturer: Bilz
Mfg #: 9074117

Technical Specifications:
*Bearing Surface: 2.44 *Bore Diameter: 1" *Brand Name: Bilz *Gage Length: 6.3 *Outside Diameter: 2.36 *Shank: CAT50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 8.7000

$534.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1" x 6" - Shrink Fit Holder

Item #: TE1229070
Manufacturer: Techniks
Mfg #: 29070

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 1 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4962

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1"-4.13" - Shrink Fit Holder

Item #: TE1229068
Manufacturer: Techniks
Mfg #: 29068

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 4.13 *Outside Diameter: 3.88 *Shank: 1 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4825

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1"-4.13" - Shrink Fit Holder with Coolblast

Item #: TE1229068B
Manufacturer: Techniks
Mfg #: 29068B

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 4.13 *Outside Diameter: 3.88 *Shank: 1 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .5562

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1"-6" - Shrink Fit Holder with Coolblast

Item #: TE1229070B
Manufacturer: Techniks
Mfg #: 29070B

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 1 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .6593

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/2 x 3.94 HD Shrink Fit Chuck

Item #: HA7150850112Z6
Manufacturer: Haimer USA LLC
Mfg #: 50.850.11/

Technical Specifications:
*Bore Diameter: 1-1/2 *Brand Name: Haimer USA LLC *Gage Length: 3.94 *Model Number: 50.850.11/2Z.6 *Outside Diameter: 3.23 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.5000

$1,197.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/2 x 3.94 HD Shrink Fit Chuck

Item #: HA7150850112Z67
Manufacturer: Haimer USA LLC
Mfg #: 50.850.11/

Technical Specifications:
*Bore Diameter: 1-1/2 *Brand Name: Haimer USA LLC *Gage Length: 3.94 *Model Number: 50.850.11/2Z.67 *Outside Diameter: 3.23 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.5000

$1,632.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 3.54 HD Shrink Fit Chuck

Item #: HA7150850114Z6
Manufacturer: Haimer USA LLC
Mfg #: 50.850.11/

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Haimer USA LLC *Gage Length: 3.54 *Model Number: 50.850.11/4Z.6 *Outside Diameter: 2.76 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.2500

$1,197.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 3.54 HD Shrink Fit Chuck

Item #: HA7150850114Z67
Manufacturer: Haimer USA LLC
Mfg #: 50.850.11/

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Haimer USA LLC *Gage Length: 3.54 *Model Number: 50.850.11/4Z.67 *Outside Diameter: 2.76 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.2500

$1,632.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 3.94 - Shrink Fit Tool Holder

Item #: GM94C50123949
Manufacturer: Parlec
Mfg #: C50-12SF39

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 3.940 *Model Number: C50-12SF394-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 3.94 Shrink Fit Chuck

Item #: HA7150840114Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.840.11/

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Haimer USA LLC *Gage Length: 3.94 *Model Number: 50.840.11/4Z.4 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.5000

$536.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 5.12 Shrink Fit Chuck

Item #: HA7150844114Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.844.11/

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Haimer USA LLC *Gage Length: 5.12 *Model Number: 50.844.11/4Z.4 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 10.0000

$614.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C50126309
Manufacturer: Parlec
Mfg #: C50-12SF63

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C50-12SF630-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$484.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It