CAT40 1/2 x 5.12 Shrink Fit Chuck

Item #: HA714084412Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.844.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 5.12 *Model Number: 40.844.1/2Z.4 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 4.0000

$452.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C40506309
Manufacturer: Parlec
Mfg #: C40-50SF63

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C40-50SF630-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$294.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 6.30 Power Shrink Fit Chuck

Item #: HA714084212Z26
Manufacturer: Haimer USA LLC
Mfg #: 40.842.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 40.842.1/2Z.26 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 5.0000

$806.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 6.30 Power Shrink Fit Chuck

Item #: HA714084212Z3
Manufacturer: Haimer USA LLC
Mfg #: 40.842.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 40.842.1/2Z.3 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 5.0000

$804.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 6.30 Power Shrink Fit Chuck

Item #: HA714084212Z37
Manufacturer: Haimer USA LLC
Mfg #: 40.842.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 40.842.1/2Z.37 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Power Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all inductive shrink fit units *Precesion AT3 Tolerance Shank *Balanced to G2.5 at 25,000 RPM or U < 1 gmm *Taper tolerance AT3 *High runout accuracy < 3µ¼m *Low tendency towards vibrationos by optimized outer geometry *Slim desgin at the top *Very rigid shank *Dirt groove in the clamping bore for safe clamping force *Coolant supply fromr ADB *Cool Jet, can be sealed *Made in Germany

Shipping Info:
*Actual Weight - 5.0000

$1,069.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2 x 6.30 Shrink Fit Chuck

Item #: HA714084212Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.842.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 40.842.1/2Z.4 *Outside Diameter: 1.26 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 5.0000

$497.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2" Bore Dia. x 3.27 Gage Length Shrink Fit Tool Holder

Item #: GM279074679
Manufacturer: Bilz
Mfg #: 9074679

Technical Specifications:
*Bearing Surface: 1.85 *Bore Diameter: 1/2" *Brand Name: Bilz *Gage Length: 3.27 *Outside Diameter: 0.95 *Shank: CAT40 *Type: Shrink Fit SlimLine Holder

Description:

Shipping Info:
*Actual Weight - 2.7000

$248.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2" Bore Dia. x 4.73 Gage Length Shrink Fit Toolholder

Item #: GM279074637
Manufacturer: Bilz
Mfg #: 9074637

Technical Specifications:
*Bearing Surface: 1.85 *Bore Diameter: 1/2" *Brand Name: Bilz *Gage Length: 4.73 *Outside Diameter: 1.34 *Shank: CAT40 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 3.5000

$295.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2" Bore Dia. x 6.3 Gage Length Shrink Fit Toolholder

Item #: GM279074638
Manufacturer: Bilz
Mfg #: 9074638

Technical Specifications:
*Bearing Surface: 1.85 *Bore Diameter: 1/2" *Brand Name: Bilz *Gage Length: 6.3 *Outside Diameter: 1.65 *Shank: CAT40 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 4.0000

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-3" - Shrink Fit Holder

Item #: TE1229026
Manufacturer: Techniks
Mfg #: 29026

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2206

$236.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-3.75" - DualDrive - Shrink Fit Holder

Item #: TE1279027B
Manufacturer: Techniks
Mfg #: 46.651.58.

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3.75 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-3.75" - Shrink Fit Holder

Item #: TE1229027
Manufacturer: Techniks
Mfg #: 29027

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3.75 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2343

$236.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-3.75" - Shrink Fit Holder wih Port

Item #: TE1229027FB
Manufacturer: Techniks
Mfg #: 29027FB

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3.75 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolFLEX (DIN B) Coolant through the flange as well as through the spindle *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1843

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-3.75" - Shrink Fit Holder with Coolflex

Item #: TE1229027F
Manufacturer: Techniks
Mfg #: 29027F

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3.75 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolFLEX (DIN B) Coolant through the flange as well as through the spindle *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2312

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-5" - Shrink Fit Holder

Item #: TE1229029
Manufacturer: Techniks
Mfg #: 29029

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2481

$273.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-5" - Shrink Fit Holder with Coolblast

Item #: TE1229029B
Manufacturer: Techniks
Mfg #: 29029B

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 3.5580 *Dimensions - Height: 3.00 Length: 9.50 Width: 3.00

$352.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-6" - Shrink Fit Holder

Item #: TE1229030
Manufacturer: Techniks
Mfg #: 29030

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 6 *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2481

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/2"-80mm - Shrink Fit Holder - Slim Line

Item #: TE1231588
Manufacturer: Techniks
Mfg #: 31588

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 80mm *Outside Diameter: 2.5 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*Smaller nose diameter than traditional ShrinkFIT designs *Maximum T.I.R. onlly 0.0001" *Balanced to 25,000 RPM at G2.5 tolerance *Great for finish passes where small nose diameter tooling is required *Coolant through spindle with coolant set screw comes standard *Each holder is certified for accuracy and balance and comes with it's own lab report

Shipping Info:
*Actual Weight - .1500

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4 SHRINK FIT HOLDER

Item #: GM76SF0250315CP
Manufacturer: Lyndex
Mfg #: CAT40-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4 SHRINK FIT HOLDER

Item #: GM76SF0250315MT
Manufacturer: Lyndex
Mfg #: CAT40-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It